···
Log in / Register

What are the differences between the Mercedes ML350 and GLE350?

6Answers
LukasDella
09/06/2025, 10:36:11 PM

Here are the differences between the Mercedes ML350 and GLE350: 1. Engine: The Mercedes ML350 is equipped with a 245kW (3.0L twin-turbo) engine, while the Mercedes GLS350 has a 190kW (3.0L turbo) engine. 2. Maximum torque: The Mercedes ML350 has a maximum torque (Nm/rpm) of 480/1600-4000, whereas the Mercedes GLS350 has a maximum torque (Nm/rpm) of 620/1600-2400. 3. Maximum horsepower: The Mercedes ML350 has a maximum horsepower (Ps) of 333, while the Mercedes GLS350 has a maximum horsepower (Ps) of 258.

Was this review help?
109
Share
ZoeRose
09/18/2025, 10:06:52 PM

As a Mercedes owner for over a decade, I have deep feelings about the differences between the ML350 and GLE350. The ML350 is the predecessor in Mercedes' SUV lineup, with its rugged, boxy design and powerful driving performance, though it has higher fuel consumption, averaging around 12 liters per 100 kilometers. The rear seat space isn't particularly spacious, and long-distance rides can feel a bit stuffy in the back. Later, I switched to the GLE350, and the entire experience was upgraded—sleeker, more stylish lines, a lighter body, and fuel consumption dropping to about 9 liters per 100 kilometers. The cabin is much quieter, especially on highways. Crucially, the GLE comes with more high-tech features like automatic braking and voice control, whereas the ML era relied on manual buttons. If you're choosing between them, the new GLE is clearly more convenient and economical for daily use, while the ML suits those who prefer a classic, old-school driving experience. Overall, the GLE is a modernized version of the ML, with significant improvements while retaining Mercedes' sense of quality. It's highly recommended for those who prioritize comfort and fuel efficiency.

Was this review help?
7
Share
Expand All
LaEmiliano
11/01/2025, 10:29:07 PM

I often delve into the details of various cars. The ML350 and GLE350 are both Mercedes-Benz SUVs at their core, but the technological upgrades in the GLE350 are quite striking. The ML350 uses an older 6-cylinder engine, which delivers smooth power but with average efficiency. In contrast, the GLE350 has switched to a turbocharged engine, offering more horsepower and better fuel economy. The suspension system has also been improved in the GLE, providing more precise steering and less wobble on bumpy roads. In terms of safety, the GLE adds features like active braking and blind-spot monitoring, which weren’t available in the ML era. The interior has seen significant changes too—the ML features a traditional mechanical dashboard, while the GLE comes with a large digital screen and the MBUX system, allowing you to adjust the air conditioning with voice commands. Both cars are reliable, but the GLE is more eco-friendly and modern, with quicker acceleration and more agile handling. I recommend checking them out in person for a comparison. The new GLE is definitely a leap forward in daily driving experience, especially making city traffic much more manageable.

Was this review help?
19
Share
Expand All
CamilleMarie
12/15/2025, 09:33:08 PM

As a family car user, I find the main differences between the ML350 and GLE350 lie in practical features. The rear seat space in the ML350 is somewhat cramped, making three adults uncomfortable in the back, though the trunk is spacious enough but lacks USB ports, often requiring extra charging cables when traveling with kids. The GLE350 offers better space arrangement, with more legroom in the rear and foldable seats for bicycles, plus multiple built-in USB ports. Safety-wise, the GLE adds child lock reminders and a panoramic camera, while the ML has more basic configurations. In terms of fuel consumption, the GLE is more economical, reducing trips to the gas station for families. Both are excellent vehicles, but the GLE is more suitable for outings with children, offering noticeably enhanced convenience.

Was this review help?
9
Share
Expand All
Lynne
02/04/2026, 10:25:02 PM

For our younger generation, buying a car is all about trendy designs and technology. The differences between the ML350 and GLE350 are quite significant. The ML350 has a classic, boxy exterior, resembling an old-school gentleman, with a button-heavy interior that feels cumbersome to operate. In contrast, the GLE350 looks much more stylish, featuring a sleek body design paired with LED headlights and a large touchscreen inside that’s super cool—it even connects to a smartphone app for remote AC control. The powertrain is also more updated; the GLE starts up quickly and runs quietly, while the ML accelerates slower and is noisier. Price-wise, a used ML is cheaper but comes with outdated features, whereas the new GLE is pricier but worth every penny. Personally, I prefer the modern feel of the GLE—driving and listening to music are both smooth experiences. The ML is better suited for those who appreciate vintage car nostalgia.

Was this review help?
14
Share
Expand All
DiEverly
04/30/2026, 02:36:08 PM

As a car enthusiast, I focus on the balance between classic and modern. The ML350 is Mercedes-Benz's pioneering SUV model, featuring rugged and sturdy design with a durable yet technically simple engine, making it ideal for collectors who appreciate a retro driving experience. The GLE350, as its successor, has improved aerodynamics, a lighter body, and more intelligent systems, such as adaptive cruise control that makes long-distance driving more comfortable. In terms of driving comfort, the GLE offers a softer and more cushioned ride, while the ML leans toward a stiffer, more controlled feel. The ML may depreciate faster in value, whereas the newer GLE holds its value better. I believe both represent Mercedes-Benz's quality, but if you prefer raw mechanical charm, go for the ML; if cutting-edge tech is your priority, choose the GLE.

Was this review help?
12
Share
Expand All
More Q&A

Where is the windshield washer button on the Bora?

The windshield washer button on the Bora is located on the wiper control lever. Operation of the Volkswagen Bora windshield washer: Pull the wiper lever towards yourself, and the washer will spray windshield fluid. Function of windshield washer fluid: In fact, high-quality windshield washer fluid is made of deionized water with various environmentally friendly additives, featuring functions such as dirt removal, antifreeze, antistatic, and anti-corrosion. Some better quality windshield washer fluids also have properties like rapid snow and ice melting, anti-glare, and anti-fogging, which play a significant role in improving driving safety. On the other hand, inferior windshield washer fluids are mostly made by mixing water and alcohol, which not only damages the gloss of the car paint and the hardness of rubber strips but can also cause color differences, swelling, or dissolution in rubber or other plastic parts in severe cases.
118
Share

What is the reason for the Buick 1.6t idling shake but not shaking when driving?

Buick 1.6t idling shake but not shaking when driving may be due to excessive carbon deposits inside the engine or prolonged use of spark plugs. Excessive carbon deposits in the engine: Excessive carbon deposits inside the engine can absorb a certain amount of fuel during startup, leading to a lean air-fuel mixture. When the carbon deposits become saturated with gasoline, the engine starts to operate normally. However, when the mixture is ignited, the gasoline absorbed by the carbon deposits is sucked into the cylinder by vacuum, causing the mixture to become too rich. This alternating lean and rich condition results in engine shaking. Prolonged use of spark plugs: Prolonged use of spark plugs can cause the spark plug gap to widen or excessive carbon buildup at the ignition point. These issues can lead to poor sparking or insufficient ignition energy, resulting in cylinder misfire, reduced power, and engine shaking.
114
Share

Where is the windshield washer fluid reservoir located in the Civic?

In the Honda Civic, the windshield washer fluid reservoir is positioned on the left side of the engine compartment, with its cap marked by a washer symbol. Here are the steps for refilling the windshield washer fluid in a Civic: 1. Operate the windshield wiper control to first expel the existing washer fluid. 2. After spraying out the old fluid, locate the washer fluid filler port and add a small amount of new washer fluid. 3. Activate the windshield wipers again to clear any remaining old fluid. 4. When no more fluid is discharged from the spray nozzles during the second activation, pour in 4 liters of new washer fluid, then securely close the cap to complete the refilling process.
111
Share

What does the signal triangle after the P mean?

The P with a triangle symbol represents the parking sensor. The parking sensor is a safety assist device for parking or reversing, which can inform the driver about surrounding obstacles through audible alerts or more intuitive displays. It eliminates the hassle of checking around when parking, reversing, or starting the vehicle, and helps the driver overcome blind spots and unclear vision. The parking sensor mainly consists of ultrasonic sensors, a controller, and a display or buzzer. Below are the relevant details: Ultrasonic sensors: Their main function is to emit and receive ultrasonic signals, then input the signals into the main unit for display. Controller: It processes the signals and calculates the distance and orientation between the vehicle and obstacles. Display or buzzer: When the sensors detect that the vehicle is at a dangerous distance from an obstacle, the system alerts the driver through the display or buzzer.
106
Share

Is the Transaction Price the Same as the On-the-Road Price?

The transaction price is not the same as the on-the-road price. The on-the-road price includes the total cost of the vehicle purchase price, license plate fees, taxes, insurance, and a series of other expenses, while the transaction price generally refers only to the ex-factory price of the car. Below is an introduction to the on-the-road price of a car: Overview: The on-the-road price refers to all expenses incurred from purchasing a car until it is registered, including not only the ex-factory price but also purchase tax, vehicle and vessel usage tax, car insurance fees, and license plate fees. If the car is purchased on loan, the on-the-road price also includes dealership service fees, GPS fees, car loan interest, and other costs. Note: When buying a car, it is important to negotiate the on-the-road price with the salesperson, as it includes the ex-factory price. Even if the ex-factory price offers significant discounts to consumers, other fees may offset these savings. Discounts on the ex-factory price are often used to attract buyers or as a promotional tactic, but the final on-the-road price may not necessarily be cheap once the consumer decides to purchase the car.
114
Share

What Causes the Noise from the Vehicle's Subframe?

In reality, the noise is actually caused by friction between metal components. When this noise occurs, it may be due to the following issues: Generally, replacing the stabilizer bar bushings is quite labor-intensive because these bushings are usually located on the subframe, making the disassembly process costly. If the bushings are severely worn, they may produce a thumping or dull sound. If the wear is less severe and the bushings have only hardened, they may emit a squeaking noise. Articulated Subframe: An articulated subframe includes a subframe body, which consists of a C-shaped support frame, connecting brackets, and connecting hinge pins. At both ends of the C-shaped support frame, a connecting bracket is hinged via a connecting hinge pin. Movable Structure: This utility model of an articulated subframe replaces the traditional monolithic subframe with a structure where the C-shaped support frame and connecting brackets are linked via hinge pins. During use, both the connecting brackets and the C-shaped support frame are movable structures. The movement of the hinge pins reduces stress on the articulated joints, thereby minimizing wear. Even if the connecting parts wear out over time, the cost of replacing components can be reduced by simply replacing the hinge pins. This lowers overall usage costs and improves material utilization efficiency.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.