What are the differences between the Mercedes-Benz Vito and the Mercedes-Benz V-Class?

1 Answers
Rita
07/24/25 8:59am
The differences between the Mercedes-Benz Vito and the Mercedes-Benz V-Class are: 1. Different body dimensions: The Mercedes-Benz Vito has a body length of 5370mm, width of 1928mm, and height of 1880mm; the Mercedes-Benz V-Class has a body length of 5400mm, width of 1928mm, and height of 1920mm. 2. Different headlights: The Mercedes-Benz Vito uses traditional halogen headlights; the Mercedes-Benz V-Class uses full LED fox-eye headlights. 3. Different hood struts: The Mercedes-Benz Vito uses ordinary struts; the Mercedes-Benz V-Class uses hydraulic struts. 4. Different door handles: The Mercedes-Benz Vito has exposed plastic handles; the Mercedes-Benz V-Class has painted handles.
Was this review help?
15
3
Share
More Forum Discussions

Is the Timely Four-Wheel Drive Prone to Failure After Several Years?

Timely four-wheel drive is generally prone to failure after several years. Here are the details: Working Principle of Timely Four-Wheel Drive: The timely four-wheel drive system only switches to four-wheel drive when necessary, while remaining in two-wheel drive under other conditions. The system automatically switches between two-wheel and four-wheel drive modes based on the vehicle's driving conditions, without requiring manual operation. Advantages: Compared to full-time four-wheel drive, the structure of timely four-wheel drive is much simpler, which not only effectively reduces costs but also helps lower the overall vehicle weight. Due to its unique structure, timely four-wheel drive is more suitable for vehicles with front transverse engine front-wheel drive platforms. This makes it possible for many SUVs or four-wheel drive sedans based on this platform to be equipped with a four-wheel drive system. The front-wheel drive platform is more conducive to expanding interior space, improving transmission efficiency, and reducing transmission system noise compared to the rear-wheel drive platform. These advantages are particularly important for small SUVs, especially those with smaller engine displacements.
19
5
Share

What is the difference between the handbrake and the footbrake?

The difference between the handbrake and the footbrake lies in the tires they act upon. Below are the specific details: Different tires affected: The footbrake applies braking to all four wheels; the handbrake only affects the rear wheels. Different principles: The footbrake works by distributing hydraulic fluid from the master cylinder to each wheel's brake caliper, which then pushes the brake pads to frictionally engage the brake disc (or drum), achieving deceleration or stopping. The handbrake uses a steel cable connected to the rear brake shoes to apply braking force. Different braking force: The footbrake provides greater braking force and includes safety features such as brake force distribution and brake override. The handbrake offers less braking force and lacks such safety configurations. Different usage scenarios: The footbrake is generally used for braking or slowing down while the vehicle is in motion; the handbrake is used after the vehicle has stopped to prevent it from rolling away.
18
1
Share

Is the handbrake light a P or an exclamation mark?

Generally, the handbrake light is a P. Here are the specific details: Handbrake light identification: Usually, the handbrake light is a P, but some models use an exclamation mark indicator for both the handbrake and the parking brake. If the vehicle has both P and exclamation mark indicators, then P is the handbrake indicator. For automatic transmission vehicles, if P lights up in the gear indicator, it means the shift lever and transmission are in the parking position. The exclamation mark indicates a fault in the parking brake system, usually caused by insufficient brake fluid. Handbrake light differences: A P or exclamation mark on the dashboard indicates an electronic parking system fault. Depending on the model and brand, the meanings of dashboard indicators may vary. For example, some cars display a red circle with an exclamation mark when the handbrake is not engaged, while others show a circle with a P. However, it is best to refer to the vehicle's user manual for accurate information.
6
5
Share

Is It Harmful to Drive Without Warming Up the Car in Winter?

Driving without warming up the car in winter can cause wear and tear on the engine, transmission, and other parts of the car, leading to a shortened lifespan; it also increases fuel consumption and makes the engine more prone to carbon deposits. Reasons for warming up the car in winter: After being parked for a long time, the engine oil flows back into the oil pan at the bottom of the engine; before the engine reaches its operating temperature, the fuel system cannot effectively vaporize gasoline due to the low temperature; in cold conditions, gear oil flows to the lower part of the transmission. Specific steps for warming up the car in winter: Start the car for 30 seconds to one minute until the engine coolant reaches normal temperature, then you can start driving. However, avoid high-speed driving at this time—maintain a low speed and do not exceed 2000 RPM. While driving at low speed, monitor the coolant temperature gauge. If it rises slightly, you can shift up appropriately. After driving about one kilometer, the car will be fully warmed up, and you can then drive normally.
12
4
Share

Is there any impact if the handbrake is not released for 200 meters?

There is an impact if the handbrake is not released for 200 meters. The following is an introduction to the relevant content: Impact: Accelerated wear of the brake discs and hardening of the brake pads due to overheating, as well as elongation of the handbrake cable. This can lead to reduced braking performance, and sometimes the burnt smell noticed by the driver comes from this. In severe cases, smoke may appear from the rear of the vehicle. Damage: Driving with the handbrake engaged causes greater wear on the braking components the faster the speed, and it also causes some damage to the tires. If the handbrake is left engaged for too long, it can cause the rear wheels to lock up, leading to smoke from friction and a significant loss of braking performance. If driving with the handbrake engaged for an extended period, it may also cause the brake caliper to seize, brake fluid leakage, and excessively high brake fluid temperature, resulting in a complete loss of braking function. If a strong burnt smell and smoke from the rear of the vehicle occur while driving, the driver should immediately slow down, brake, and release the handbrake.
3
5
Share

What is the difference between blue and white parking lines?

Regarding the difference between white parking spaces and blue parking spaces, the details are as follows: 1. Blue parking spaces: Indicate that these are free parking spaces. However, it is important to note that there are two situations where penalties may apply. First, parking for more than a day or longer is prohibited, as blue parking spaces are meant to prevent vehicles from being maliciously occupied for extended periods. Additionally, some blue dashed-line parking spaces may indicate time-limited parking, and exceeding the time limit should be avoided. Second, some blue-lined parking spaces may have arrows indicating the parking direction, which should also be observed. 2. White parking spaces: Indicate that these are paid parking spaces. In areas with white lines, it is necessary to check roadside signs to confirm whether parking is actually permitted, as not all white lines on the roadside denote parking spaces. Even in paid parking zones, parking is not always allowed; it depends on the instructions on roadside signs, such as "No parking during the day," "Free at night," "Penalty for overtime parking," "Charging hours," etc.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.