···
Log in / Register

What are the differences between the Mercedes-Benz GLB200 and GLB250?

5 Answers
SanChristian
07/29/2025, 08:07 AM

The Mercedes-Benz GLB200 is a compact SUV, while the GLB250 is a luxury compact SUV. The differences between the two are as follows: Different appearances: The Mercedes-Benz GLB200 adopts a bold style, with a square and straight front face design, using lines with right-angle curves to give the entire front end a bold flavor. The corners are slightly rounded, revealing an elegant touch. The Mercedes-Benz GLB250 features a minimalist style, with an overall design similar to the GLS. The trapezoidal wheel arches are quite rugged, complemented by densely-spoked black wheels that enhance the sporty and bold look. The lower bumper of the taillights is designed in black with added diffusers, increasing the sporty feel. Power aspects: The Mercedes-Benz GLB200 is equipped with a 1.3T four-cylinder engine, delivering a maximum power of 120kW, up to 163 horsepower, and a peak torque of 250Nm. The 0-100km/h acceleration time is approximately 9.1 seconds, paired with a 7-speed dual-clutch transmission. The Mercedes-Benz GLB250 is powered by a 2.0-liter turbocharged engine, with a maximum output of 224 horsepower and a peak torque of 350Nm. The transmission system is matched with an 8-speed dual-clutch gearbox and comes with Mercedes' 4Matic all-wheel-drive system.

Was this review help?
3
1
Share
Valeria
08/13/2025, 06:10 PM

I often compare the Mercedes-Benz GLB200 and GLB250, with the main differences lying in their powertrains. The GLB200 is equipped with a 1.3-liter turbocharged engine producing 163 horsepower, offering slower acceleration but better fuel efficiency for daily driving, though it can feel a bit sluggish when overtaking. The GLB250 upgrades to a 2.0-liter turbocharged engine with 221 horsepower, delivering stronger acceleration, better stability in corners, and a more exhilarating experience when overtaking on highways—making the driving experience significantly better. While the GLB200 has a slight edge in fuel economy, the GLB250 remains fairly economical. Both models share the same dimensions and space, making them suitable for family trips. If you occasionally enjoy track days or prefer a more engaging drive, the GLB250 is definitely worth the extra cost. Electronic aids like traction control are similar, but the GLB250's power delivery is optimized better. Overall, the GLB250 offers a more thrilling driving experience, ideal for those who crave speed. When choosing, I recommend test-driving both to feel the difference—this way, you won’t regret your decision.

Was this review help?
10
0
Share
Expand All
Carole
10/08/2025, 04:37 AM

When buying a car, I prioritize value for money. The Mercedes GLB200 starts at around 350,000 yuan, equipped with a 1.3T engine producing 163 horsepower, which is sufficient for daily commuting, school runs, and family use. It boasts low fuel consumption and simple maintenance. The GLB250 is more expensive, priced at approximately 450,000 yuan, featuring a 2.0T engine with 221 horsepower, offering faster acceleration and stronger power. However, in city driving, the difference between the two is minimal, especially in traffic jams where performance is nearly identical. Both models offer the same spaciousness, ideal for family storage needs. The 250 might come with additional features like leather seats or upgraded wheels, but these aren't essential. If you're on a tight budget, the 200 is more than adequate, saving you money for fuel or travel. The 250's insurance and maintenance costs are slightly higher. It's suitable for occasional long trips, but for daily commuting, the 200 offers much better value for money. Both cars come with similar safety features like parking sensors and automatic emergency braking. Therefore, I recommend the 200 for practical families—no need to spend extra unless you particularly value quicker acceleration.

Was this review help?
11
1
Share
Expand All
VanFrancisco
11/21/2025, 10:08 PM

I'm passionate about automotive technology. The core difference between the GLB200 and 250 lies in their engines. The 200 features a 1.3L turbocharged engine producing 163hp paired with a 7-speed transmission, offering smooth city driving but requiring 9 seconds to accelerate to 100km/h. The GLB250 comes with a 2.0L turbocharged engine delivering 221hp with the same transmission, achieving 0-100km/h in 6.9 seconds, showcasing significantly better performance. Both models have suspension systems suitable for family use, but the 250 is tuned to be firmer for better handling. Standard equipment on the 250 may include LED headlights and 18-inch wheels, while the base 200 is more modest. Both share the same-sized infotainment screen with Android and Apple connectivity, but the 250 adds driving mode selections like Sport mode. Technologically, the 250 holds a clear power advantage. Maintenance-wise, the 200 consumes less oil but offers similar reliability. The 250 suits those who occasionally crave spirited driving, prioritizing power.

Was this review help?
20
2
Share
Expand All
StZoe
01/11/2026, 11:44 PM

As an office worker, I drive the GLB in the city every day. The GLB200's 1.3T 163 horsepower is sufficient for commuting, fuel-efficient, easy to park, and agile in crowded areas. The GLB250, equipped with a 2.0T 221 horsepower engine, offers faster acceleration, but its advantage is limited in the city where traffic jams are common. Both cars have the same space, making them suitable for carrying passengers or cargo without issues. The 200 is more affordable with lower monthly expenses, while the 250 has slightly higher fuel consumption, increasing fuel costs. Features like air conditioning and navigation are basically the same, and safety equipment such as blind-spot monitoring comes standard. The driving assistance systems are identical. The 200 offers higher commuting efficiency, making it suitable for a busy lifestyle, while the 250 is more helpful for highway driving or frequent overtaking. If your daily driving is mostly in the city, the 200 is a wise choice—economical and practical, with little noticeable difference in power for everyday use.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

Why does a sedan experience insufficient power when the air conditioning is on?

It is normal for a car to experience insufficient power after turning on the air conditioning, and this phenomenon becomes more noticeable with older vehicles. This happens because the car's air conditioning is powered by the engine, and the air conditioning compressor draws its power from the engine. As a result, some power is consumed during the operation of the air conditioning, leading to a sensation of sluggish acceleration and insufficient power. The power consumption of a car's air conditioning compressor is around 25 kW. Nowadays, mainstream naturally aspirated engines can achieve a maximum power output of over 80 kW. However, a car's engine may only reach its maximum power output at around 5,000 RPM, which means that at lower engine speeds, the power output might only be around 20 to 30 kW. In this scenario, the air conditioning consumes about 20% of the engine's power, which is a significant proportion and can create substantial resistance for the engine.
18
0
Share

Which signal light to use when merging from a slip road to a main road?

When merging from a slip road to a main road, the left turn signal should be used. It is important to note that turn signals must always be used when entering a main road from a slip road. Using turn signals communicates your driving intentions to vehicles behind you and helps prevent accidents. When merging from a slip road into a main road, not only should you use your car's turn signals, but you should also carefully observe the traffic conditions behind you on the main road. Only when you are certain there are no vehicles on the main road should you slowly merge into the main lane. Generally speaking, while driving, you should check your mirrors, but be aware that mirrors have blind spots. If you cannot be sure whether there are vehicles in the blind spot, you can check the interior rearview mirror or turn your head to look directly to ensure safety when changing lanes.
17
3
Share

Should You Turn Off the Engine or Shift to Park First in an Automatic Transmission Car?

In an automatic transmission car, you should shift to Park (P) first before turning off the engine. Nowadays, more and more car models are designed so that you cannot turn off the engine without shifting to P gear. The P gear has an additional locking gear compared to Neutral (N). When the car is in N gear (neutral), it can move if subjected to external force. However, when shifted to P gear, the locking gear secures the output shaft gear of the transmission, preventing the car from moving even under external force, thus effectively keeping the vehicle stationary. Shifting to P gear before turning off the engine is a safety measure. Before shifting to P gear, always engage the handbrake first, as only the handbrake can truly prevent the car from moving. In the event of external force, engage the handbrake first to bear the force, then shift to P gear to let the P gear take the load.
5
5
Share

What Causes the Noise When Turning the Steering Wheel Left and Right?

Reasons for noise when turning the steering wheel left and right: 1. Sound from the turn signal reset: If the turn signal is activated while turning, the noise may come from the rebound clip of the turn signal's automatic reset mechanism. 2. Friction between plastic parts: The steering wheel is typically made of plastic components. In colder temperatures, plastic hardens and may produce friction sounds. 3. Abnormal noise from the steering wheel: If the noise originates inside the steering wheel, it is likely caused by the clock spring (spiral cable) of the airbag. Replacing the clock spring can resolve this issue. 4. Aging of the tie rod end ball joint: If the tie rod end ball joint is worn out, it can cause the steering wheel to vibrate and produce noise. In such cases, replacing the tie rod end ball joint and performing a wheel alignment afterward is usually necessary.
1
3
Share

What is the function of the car ION button?

ION refers to the air purification function. When ION is activated, the air purifier starts working. Below are the relevant details: 1. Function: When this function is enabled, the negative ion generator produces and releases a large number of negative ions. Since dust, particles, and harmful substances like formaldehyde in the air can easily adhere to these negative ions, they form larger particles and settle down, ultimately being filtered by the air filter to achieve the effect of purifying the air inside the car. Simply put, this function transforms tiny particles that cannot be filtered by the air filter into larger particles that can be filtered, through adhesion to negative ions, thereby achieving purification. 2. Vehicle Models: The air negative ion purification function is generally equipped in high-end models, and vehicles without this function naturally do not have an ION button. For vehicles equipped with the air negative ion purification function but without a physical ION button, it is usually integrated into the central control screen. After opening the air conditioning interface on the screen, the ION touch button can be clearly seen.
19
1
Share

What is a Trailer Tractor?

Trailer tractor refers to a general large truck or semi-trailer where the tractor and the trailer are connected by a towing device. This means the tractor can detach from its original trailer and tow other trailers, while the trailer can also detach from its original tractor and be towed by other tractors. Below are the relevant introductions: 1. Trailer: A trailer is a vehicle that is towed by a motor vehicle but does not have its own power drive device. It consists of a combination of one motor vehicle (such as a truck, tractor, or forklift) and one or more trailers. The truck or tractor serves as the driving section of the vehicle train, known as the main vehicle. The towed section pulled by the main vehicle is called the trailer, which is an important vehicle type in road transportation. Using vehicle trains for transportation is one of the most effective and simple means to improve economic efficiency. 2. Function: Trailers offer advantages such as speed, mobility, flexibility, and safety, making them convenient for regional transportation.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.