What are the differences between the Mercedes-Benz E200 and E300?

1 Answers
LaKatherine
07/30/25 7:28am
Introduction to the differences between the Mercedes-Benz E200 and E300: Different engine displacements: The different engine displacements result in changes in the power and torque of the Mercedes-Benz E200 and E300. Differences in configuration: The Mercedes-Benz E300 includes additional features such as folding mirrors and seat heating, which are not available in the E200. Power aspects: The Mercedes-Benz E300 is equipped with a six-cylinder naturally aspirated engine, while the E200 has a four-cylinder turbocharged engine. In terms of power, the four-cylinder turbocharged engine offers slightly stronger low-end torque, but overall power output is weaker compared to the six-cylinder engine.
Was this review help?
13
1
Share
More Forum Discussions

How to Open the Fuel Tank Cap of Civic?

The method to open the fuel tank cap of Civic: First, locate the driver's seat in the main cockpit, then look under the seat to find the fuel tank cap switch. Press it with your hand to open the fuel tank cap. When the switch is pressed, the fuel tank cap will pop out. The Civic is a compact car with body dimensions of 4649mm in length, 1800mm in width, and 1416mm in height, and a wheelbase of 2700mm. In terms of power, the Civic is equipped with a 1.0T and a 1.5T turbocharged engine, matched with a CVT transmission. The maximum power of the 1.0T engine is 92kW, with a maximum torque of 180Nm; the maximum power of the 1.5T engine is 130kW, with a maximum torque of 220Nm.
2
3
Share

How Much Does Using Air Conditioning Increase Fuel Consumption?

For a car with an average fuel consumption of 10 liters per 100 kilometers, using air conditioning typically increases fuel consumption by approximately 2 liters. Below is additional information regarding air conditioning fuel consumption: 1. Operation of the Cooling System: The automotive air conditioning cooling system consists of a compressor, condenser, receiver-drier, expansion valve, evaporator, and blower fan. These components are connected by copper pipes (or aluminum pipes) and high-pressure rubber hoses to form a sealed system. When the cooling system operates, refrigerant circulates through this sealed system in different states to lower the temperature of the air around the evaporator. 2. Impact of Temperature on Fuel Consumption: Higher temperatures and greater humidity result in higher fuel consumption due to air conditioning use. When temperatures exceed 20 degrees Celsius, fuel consumption increases by approximately 10% to 20%, depending on temperature and humidity levels. If temperatures reach around 40 degrees Celsius, combined with relatively high humidity, fuel consumption can increase by up to 30%.
11
0
Share

What are the brands of anti-tampering identification on car bodies?

The VIN code label on a car is the anti-tampering identification. Location of the VIN code The 17-character alphanumeric VIN code can be found on the lower left or right corner of the windshield, in the trunk, or on the engine frame. Meaning of the VIN code: License plates in many cities have earned the reputation of being the most expensive piece of metal, and the combination of numbers and letters on them is a way to stand out. However, the license plate is not the actual 'ID card' of the vehicle. From 'birth' to 'scrapping,' every vehicle has a unique 'ID number,' known as the Vehicle Identification Number (VIN), commonly referred to as the chassis number. The VIN code records the vehicle's production date, place of manufacture, manufacturer, and other information. Like an ID card, the label carrying the VIN information is not simple—it must combine multiple functions to serve as the vehicle's 'identity' label.
18
0
Share

What are the reasons why the fuel tank cap of a Mercedes-Benz E-Class won't close?

The reasons why the fuel tank cap of a Mercedes-Benz E-Class won't close are as follows: Issues with the connecting wire: The fuel tank cap may not close due to problems with the connecting wire of the switch. If the wire is stuck between components, it can prevent the cap from closing. When attempting to close the fuel tank cap, the owner can check the connecting wire and adjust it downward if necessary. Alternatively, the issue might be caused by a broken motor or a damaged latch on the fuel tank cap, in which case a visit to a repair shop is required for inspection and repair. Deformation due to collision: Check if the fuel tank cap has been deformed due to a collision, preventing it from closing properly. If deformation is the issue, the owner will need to visit a repair shop to replace the fuel tank cap. Alternatively, the owner can have the repair shop staff inspect the locking mechanism of the fuel tank cap to see if there is any damage.
4
3
Share

What Does a Red Light Running Electronic Eye Look Like?

The camera of a red light running electronic eye is typically shaped like a rectangular box, with a supplementary lighting device beside it. Red light running cameras: They are all located about 20 meters behind the stop line at intersections. If a vehicle runs a red light, the traffic monitoring system will take photos from the rear of the vehicle as evidence. Therefore, this type of camera for capturing red light violations is only found at such intersections, while cameras in other locations are generally for speed detection or public surveillance. The principle of electronic police capturing red light running: Current electronic police capture systems rely on ground pressure magnetic induction loops to detect red light running. When the front wheels of a vehicle pass the stop line and press the induction loop, the first photo is taken. When the rear wheels pass the stop line and press the induction loop, the camera captures the second photo. When the vehicle reaches the opposite intersection and presses the induction loop, the third photo is taken.
17
0
Share

What does diesel engine runaway mean?

Diesel engine runaway refers to a malfunction where the diesel engine's speed becomes uncontrollable and continuously increases. Runaway can cause major accidents such as cylinder seizure or crankshaft breakage in diesel engines. Diesel engines typically experience runaway faults either during startup or when the load suddenly disappears or decreases during operation, but they do not experience runaway faults under load. There are two main causes of runaway: one is excessive diesel fuel supply, and the other is engine oil entering the combustion chamber and burning. If runaway is not handled properly while driving, it may lead to traffic accidents. Below are the causes and solutions for runaway: 1. Excessive diesel fuel supply: Causes thick black smoke from the exhaust pipe during runaway. You can inspect components of the fuel supply system and perform repairs after analysis, such as the fuel pump, injector, governor, and other parts. 2. Engine oil entering the combustion chamber and burning: Causes blue smoke from the car's exhaust pipe. You can inspect components of the lubrication system to determine if too much oil has been added or if the oil does not meet requirements.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.