What are the differences between the Mercedes-Benz E-Class and S-Class?

What is the difference between BMW with Li and without Li?

L refers to the long-wheelbase model, and i indicates that BMW's engine technology is electronic fuel injection technology. The main difference between cars with Li and without Li is the length of the wheelbase and the engine technology. The i is a technology that BMW had in the 1980s, which was a very advanced technology in the world at that time. BMW proudly added the i to the model number at that time, and now it is inherited from the past, just like BMW's double-kidney grille. The following is an introduction to BMW cars: 1. BMW (Bavarian Motor Works), the full Chinese name is Bayerische Motoren Werke AG, a German luxury car brand. BMW's car series include i, X, Z, and pure numbers 4 models, and several series such as 1, 2, 3, 4, 5, 6, 7, and 8. 2. BMW was founded in 1916 and is headquartered in Munich, Bavaria, Germany. The blue and white logo of BMW is the color of the state flag of Bavaria, where BMW's headquarters is located.

1

3

Share

How to Add Windshield Washer Fluid?

To activate the windshield washer, pull the wiper control stalk located on the right side of the steering wheel toward the driver. Here is relevant information about windshield wipers: 1. Usage Instructions: Use wipers when raining; avoid using them to wipe dust. Prefer slow speed over fast speed. Maintain the vehicle's washer system properly and avoid exposure to high temperatures, frost, or dusty conditions. 2. Replacement Method: Lift the wiper arm, press the clip underneath to remove the wiper blade, detach the wiper, pry up the front end of the center clip, insert the new wiper blade into the center clip, pull it tight by hand until you hear a click sound indicating successful replacement. 3. Function: To remove rain, debris, and dust adhering to the vehicle's windshield, thereby improving driver visibility and enhancing driving safety.

7

1

Share

What is the gear shift lever called?

The lever used for shifting gears in a car is called a gear shift lever, also known as a gear stick. Manual transmission gear shift lever: The gear shift lever in a manual transmission car has gears marked as 1, 2, 3, 4, 5, R, and N. Some manual transmissions have five forward gears, while others have six. Automatic transmission gear shift lever: The gear shift lever in an automatic transmission has positions marked as P, R, N, D, and S, which correspond to Park, Reverse, Neutral, Drive, and Sport modes, respectively. Some automatic transmissions also have an L gear, where L stands for Low, indicating a low-speed gear. Column shifter (or steering column shifter): Some cars have the gear shift lever designed behind the steering wheel, which is called a column shifter. The advantage of a column shifter is that it does not occupy the space between the driver and front passenger, allowing the area where the gear shift lever would normally be to be designed as a storage compartment or cup holder.

16

3

Share

What to Do When the Battery of Haval H6 Dies?

Here are the solutions for a dead battery in Haval H6: 1. Push-start: Push-starting is the most effective emergency starting method, but it is a last resort and should not be used frequently, as it can cause certain damage to the engine and clutch. This method should especially be avoided for automatic transmission vehicles. 2. Towing-start: The method and principle of towing-start are similar to push-starting, but using another vehicle for towing is much more convenient and less labor-intensive. When implementing this method, use a tow rope of appropriate length and ensure both ends are securely fastened. Before towing, the drivers of both vehicles should agree on communication signals, such as using a horn or hand gestures to indicate starting and stopping, to ensure coordinated actions. 3. Jump-start: If there is another vehicle available with jumper cables when the battery dies, the jump-start method can be used to start the vehicle. During the operation, bring the two vehicles close enough so that the jumper cables can connect the positive and negative terminals of both batteries. Ensure that the two vehicles do not come into contact, and only use cables with sufficient load capacity and insulated sheathing.

17

2

Share

What does the C1M driver's license mean?

C1M is a combined driver's license that merges the C1 driver's license and the M driver's license. Since each driver can only hold one driver's license, if additional vehicle types are added to the existing license, the two permitted vehicle types will be combined into one license, resulting in this form. Holding this license allows the driver to operate both C1-permitted vehicles and wheeled self-propelled machinery, including cars, tire cranes, road rollers, tractors, harvesters, and specialized construction machinery. Classification of driver's licenses: Motor vehicle driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P. C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving range for a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people.

20

2

Share

What is the purpose of the 12V socket in the trunk?

Here are the uses of the 12V socket in the trunk: 1. Convenient power supply for devices: Some car models provide a 12V power socket in the trunk to facilitate power supply for devices such as air pumps and lighting lamps. 2. Connection of electrical appliances: For example, it can be connected to 12V electrical appliances such as car refrigerators, car vacuum cleaners, and projectors. The 12V battery in the car trunk is a battery that can continue to be used after discharge and charging. The types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries. The positive electrode of the 12V lead-acid battery in the car trunk is lead dioxide, and the negative electrode is lead. When the 12V battery in the car trunk discharges normally, the positive and negative electrodes of the 12V battery react with sulfuric acid to form lead sulfate. When the concentration of the sulfuric acid solution in the battery drops to a certain level, the battery must be charged. When charging with an external power source, the electrodes and solution can be restored to their original state, and the 12V battery in the car trunk can be used again after charging.

5

1

Share

What are the differences between the Mercedes-Benz E-Class and S-Class?

What is the difference between BMW with Li and without Li?

How to Add Windshield Washer Fluid?

What is the gear shift lever called?

What to Do When the Battery of Haval H6 Dies?

What does the C1M driver's license mean?

What is the purpose of the 12V socket in the trunk?

Which country produces Toyota cars?

Where is the Tire Pressure Monitoring on the Buick Verano?

How to Avoid Driving Blind Spots?

Which Button to Press When Car Windows Fog Up?