What are the differences between the Mercedes-Benz CLA and the Mercedes-Benz C-Class?

1 Answers
McLillian
07/29/25 11:31am
The differences between the Mercedes-Benz CLA and the Mercedes-Benz C-Class are as follows: 1. Dimensions: The CLA measures 4654*1777*1413mm in length, width, and height, with a wheelbase of 2699mm. The C-Class measures 4714*1810*1442mm in length, width, and height, with a wheelbase of 2840mm, making it noticeably larger than the CLA. 2. Drive system: The CLA uses a front-engine, front-wheel-drive layout, while the C-Class uses a front-engine, rear-wheel-drive layout. 3. Powertrain: Both models are equipped with 1.6T and 2.0T engines, but they are paired with different transmissions. The C-Class is matched with a 9-speed automatic transmission, while the CLA is paired with a 7-speed dual-clutch transmission.
Was this review help?
7
0
Share
More Forum Discussions

Is a U-turn allowed when there is a dotted line inside the left-turn red light stop line?

A U-turn is not allowed when there is a dotted line inside the left-turn red light stop line. U-turns must follow the left-turn traffic signal instructions. At some intersections, when the straight-ahead signal is green, left-turning vehicles can enter the left-turn waiting area to wait for the left-turn signal. Similarly for U-turns, vehicles can first enter the waiting area and wait until the left-turn signal turns green before making the turn. Otherwise, it would be considered running a red light. Prohibited U-turn situations: U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, vehicles must cross the crosswalk before making the turn and cannot perform the U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even in the leftmost lane, if there is no sign allowing left turns, U-turns are not permitted. U-turns are prohibited inside the second left-turn lane line: When a vehicle is stopped in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, U-turns can only be made from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, vehicles must wait for the green light and cross the stop line before making the turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and 12 demerit points. If you miss an exit on the highway, continue to the next exit instead of attempting an illegal U-turn.
10
2
Share

Can a Semi-Automatic Car Be Push-Started If the Battery Dies?

A semi-automatic car cannot be push-started if the battery dies. Automatic transmission cars are equipped with a torque converter, and the engine can be started by jump-starting with a new battery. Reasons why it cannot be push-started: Automatic transmission cars typically use hydraulic transmission devices to replace the mechanical clutches found in manual transmission cars, so there is no clutch pedal. When the engine speed is low, the torque transmitted by the hydraulic fluid is limited and insufficient to push the car forward. When the gear lever is placed in the drive position and the brake pedal is released, as the throttle is applied and the engine speed increases, the transmitted torque also increases, allowing the car to move forward. Two scenarios of a car battery dying: There are two scenarios when a car has no power: first, the battery itself has no charge, and second, the battery has charge but there is an issue with the output circuit. Whether it's an automatic or manual transmission, the car cannot be push-started because the basic conditions for starting the engine cannot be met. Fuel injection pressure cannot be established because the electric fuel pump in the fuel tank cannot operate without battery power, making it impossible to generate fuel delivery and pressure. As a result, the fuel injectors will not open, and the engine cannot start.
15
0
Share

Does Modifying the Exhaust Increase Fuel Consumption?

If only minor modifications are made to the exhaust pipe, it will not significantly increase the car's fuel consumption. Theoretically, if the entire exhaust pipe is removed, the exhaust resistance completely disappears, which can lead to an increase in engine power and consequently higher fuel consumption. Reducing Exhaust Resistance: Race cars (including motorcycles) do not have mufflers in their exhaust systems to minimize exhaust resistance, though this results in significant noise. Modifying the exhaust pipe can indeed have some impact on the engine's fuel consumption. Reasons for Modifying the Exhaust Pipe: Considering the four reciprocating actions of the engine—intake, compression, explosion, and exhaust—if the exhaust pipe cannot quickly expel the burned gases, the subsequent intake stroke will inevitably fail to rapidly and completely draw in fresh air. This naturally leads to suboptimal horsepower performance, which is why modifying the exhaust pipe is considered.
16
0
Share

Can a Motorcycle Start Directly After Refueling When It Runs Out of Gas?

A motorcycle can start directly after refueling when it runs out of gas, but the starting time will be longer. This is because the fuel switch of a scooter is of the vacuum negative pressure type. After the fuel line runs out of gas, it takes some time for the vacuum negative pressure to fill it up, including the carburetor. Precautions: The "Gas Station Fire Safety Management Regulations" stipulate that after refueling a motorcycle, it should be manually pushed 4.5 meters away from the refueling island before starting. Gas station staff should strictly enforce this regulation to minimize the risk of fire. Refueling Time: It is advisable to avoid refueling during the hot midday sun in summer when temperatures are high. Since gasoline is billed by volume rather than weight, it expands when hot and contracts when cold. Refueling in the morning or evening allows for more mass of gasoline for the same volume, saving a significant amount.
12
2
Share

What are the penalties for driving against traffic during congestion?

According to the Road Traffic Safety Law of China, drivers who drive against traffic on ordinary roads will be given a warning or fined accordingly, with 3 demerit points recorded. Legal Basis: Article 90 of the Road Traffic Safety Law of the People's Republic of China states that motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined. If this Law provides otherwise, penalties shall be imposed in accordance with the relevant provisions. Driving against traffic during congestion is punishable. If the vehicle has not crossed the stop line but is driving against traffic, 3 demerit points will be deducted. If the vehicle has already crossed the stop line and is driving against traffic, 3 demerit points will be deducted. If the vehicle has entered the opposite intersection and is not driving in the correct lane, 2 demerit points will be deducted. Therefore, driving against traffic during congestion is punishable. Relevant Regulations: Article 54 of the Road Traffic Safety Law stipulates that when road maintenance vehicles or engineering operation vehicles are performing their duties, their driving routes and directions are not restricted by traffic signs or markings, provided that they do not affect the passage of other vehicles. Other vehicles and pedestrians should give way. Motor vehicles such as sprinklers and sweepers should operate according to safety standards; they are not restricted by lane division when not affecting other vehicles, but they must not drive against traffic.
10
0
Share

What does the emission 2.0t mean?

The emission 2.0t, where "t" refers to a turbocharged engine, and 2.0 indicates the engine displacement. A 2.0t engine is essentially a 2.0I naturally aspirated engine equipped with a turbocharger to enhance the engine's output power and torque. Turbocharger: A turbocharger is essentially similar to an air compressor, increasing the intake air volume by compressing air. It utilizes the inertial force of the exhaust gases expelled by the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller then compresses the air coming from the air filter pipe, pressurizing it into the cylinder. Increased engine speed: When the engine speed increases, the exhaust gas expulsion speed and turbine speed also increase synchronously. The impeller compresses more air into the cylinder, allowing more fuel to enter the cylinder for combustion, thereby increasing the engine's output power.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.