What are the differences between the Mercedes-Benz C300 and C260?

1 Answers
MorganAnn
07/29/25 8:51pm
Mercedes-Benz C300 and C260 differences are as follows: Different engines: The C260 uses a 1.5-liter turbocharged engine, while the C300 uses a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine in the C260 delivers 184 horsepower and 280 Nm of maximum torque, with peak power output at 6100 rpm and maximum torque available between 3000-4000 rpm. The C300's 2.0-liter turbocharged engine produces 258 horsepower and 370 Nm of maximum torque, achieving peak power at 6100 rpm and maximum torque between 1800-4000 rpm. Different technologies: The C260 is equipped with a 48V mild hybrid system, while the C300 features direct fuel injection technology.
Was this review help?
1
5
Share
More Forum Discussions

What kind of car is a 'Wagon'?

Wagon refers to a station wagon. Many car models have both wagon and sedan versions, such as the Mercedes-Benz C-Class, Mercedes-Benz E-Class, BMW 3 Series, BMW 5 Series, Audi A4, Audi A6, and Octavia. These models all offer both sedan and wagon variants. Station wagons feature larger trunk space, providing excellent practicality. The Octavia Combi is equipped with three engine options: 1.2T, 1.4T, and 1.5L, paired with manual, automatic, and dual-clutch transmissions. In terms of styling, the Octavia Combi adopts Škoda's brand design language, featuring smooth body lines, three-dimensional surfaces, and a striking crystal-cut body style.
11
4
Share

How to Handle a 3-Point Traffic Violation Deduction?

Bring your ID card, driver's license, and vehicle registration certificate to the traffic violation processing hall. Submit the documents to the staff to confirm if there is any illegal record for the vehicle. Take the penalty decision letter to the designated bank to pay the fine. Once the penalty decision letter is printed, the fine must be paid within 15 days. After 15 days, a 3% late fee will be charged daily.
6
3
Share

What is the idle speed reset method for a 2005 Accord?

Turn the idle adjustment bolt tight, then loosen it by 1.5-2.0 turns. Slowly loosen the throttle bolt to reduce the engine speed to a very low level, almost stalling. Ensure the engine speed reaches the required range (800-1000 RPM). Press the accelerator and release it to check if the engine stalls. If it doesn't stall, it means the idle speed has been properly adjusted.
7
3
Share

How to set up one-touch window roll-up for the 2014 Verna?

Press and hold the switch to the first position until the window moves to the desired position; then press slightly harder to the second position, and the window will automatically roll down. Lift the button to the first position, release when the window reaches the desired position; then briefly pull the switch to the second position to let the window close automatically.
14
1
Share

How Long Does a Toyota Hybrid Battery Last?

Toyota hybrid batteries can last for 8 years or 200,000 kilometers. The actual lifespan depends on factors such as the driving environment, road conditions, and driving habits. Toyota hybrid models use lithium batteries, and the service life of lithium batteries is determined by two main factors: the operating environment and large-scale charge-discharge cycles. The Levin is a compact sedan under Toyota, equipped with two types of engines: a 1.2-liter turbocharged engine and a 1.8-liter naturally aspirated engine. The 1.8-liter naturally aspirated engine is an Atkinson cycle engine, with a maximum power output of 72 kW and a maximum torque of 142 Nm.
3
4
Share

Can China III vehicles enter Beijing?

China III vehicles can enter Beijing, but they are not allowed to drive within the Sixth Ring Road. The main emission standards for China III vehicles are: HC emissions below 0.2 grams per kilometer, CO emissions below 2.3 grams per kilometer, NOx emissions below 0.15 grams per kilometer, with no PM requirement. The purpose of setting vehicle emission standards is to control and reduce vehicle pollutants and improve ambient air quality. Vehicle pollutants include: carbon monoxide, hydrocarbons, nitrogen oxides, and PM harmful gases. Solutions for vehicles failing to meet emission standards include: 1. Cleaning the fuel injector; 2. Replacing piston sealing rings; 3. Using higher quality fuel.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.