What are the differences between the Magotan B8 and B8L?

1 Answers
VonJesse
07/30/25 12:24am
The main differences between the Magotan B8L and B8 lie in the body dimensions, with the B8L being a long-wheelbase model. They also differ in maximum power/maximum torque, mixed fuel consumption [L/100km], and 0-100km/h acceleration time [s]. Below are the detailed differences between the Magotan B8L and B8: 1. Maximum power/maximum torque differ: (1) Magotan B8: Maximum power/maximum torque 110kW/250N.m. (2) Magotan B8L: Maximum power/maximum torque 137kW/320N.m. 2. Mixed fuel consumption [L/100km] differs: (1) Magotan B8: Mixed fuel consumption [L/100km] 5.8. (2) Magotan B8L: Mixed fuel consumption [L/100km] 6.3. 3. 0-100km/h acceleration time [s] differs: (1) Magotan B8: 0-100km/h acceleration time [s] 9.1. (2) Magotan B8L: 0-100km/h acceleration time [s] 8.1.
Was this review help?
14
3
Share
More Forum Discussions

What is the material of friction clutch plates?

The friction plates of the clutch are mainly made of composite materials. The primary material for friction plates is asbestos-based friction material, while some clutch plates use semi-metallic materials and composite fiber materials, and others employ ceramic fiber materials. Here is some information about the clutch: 1. The clutch is a crucial component in the transmission system, located between the engine and the gearbox. It can connect or disconnect the engine from the gearbox. 2. The clutch pressure plate is fixed to the engine flywheel, with the clutch plate situated beneath it. The clutch plate has splines in the center, which secure a transmission shaft that serves as the power input shaft for the gearbox. 3. When starting the vehicle, the semi-engagement technique is required. During startup, the speed difference between the engine flywheel and the clutch plate is significant. If the clutch is fully engaged abruptly, it can cause the engine to stall.
14
5
Share

What Lights to Use When Driving in the Rain?

Here are the different scenarios for driving in the rain: 1. Use parking lights when the rain is light: At the beginning of the rain, when the rainfall is not heavy and the sky is relatively dark but visibility is still good, parking lights should be used. 2. Use headlights or front fog lights when the rain is heavy: When the rain is heavier, the rainwater itself can obstruct visibility, and water on the road surface splashed by the rolling tires of the vehicle ahead can create a mist that significantly affects visibility. In this case, headlights or front fog lights should be turned on. Fog lights are not designed for illumination; their beams are scattered, so they appear bright without being glaring. 3. Use rear fog lights during heavy rain: Rear fog lights should only be turned on when the rain is extremely heavy. The red tail lights already have excellent penetration power, and ordinary heavy rain cannot block their light. Rear fog lights are very bright and are designed to penetrate thick fog. Using them in normal rainy conditions can easily dazzle the drivers behind, compromising their visibility and thus safety.
5
5
Share

How to Turn Off the Rear Wiper on a Ford?

Ford wipers generally have several settings. To turn off the wiper, push the wiper control lever forward by one notch. Here are some precautions regarding wiper usage: 1. When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid and avoid dry wiping. 2. If there are stubborn or hard contaminants on the glass, clean them manually. These substances can easily damage the wiper blade, resulting in poor wiping performance, and in severe cases, may even affect the wiper motor. 3. When lifting the wiper blade during car washing or routine cleaning, hold the "backbone" of the wiper blade and gently return it to its original position when done.
19
3
Share

Where is the windshield washer fluid location for the BYD Song?

Introduction to the windshield washer fluid refill location for the BYD Song: The washer fluid reservoir is located at the lower left corner of the engine compartment. The filler port has a black cap - simply open the cap and pour in the washer fluid. Different regions require different types of washer fluid. Owners in northern areas are advised to use antifreeze washer fluid, while those in southern regions should opt for washer fluid with degumming components. Below is relevant information about windshield washer fluid: 1. Automobile windshield washer fluid, commonly known as windshield cleaning fluid, is a consumable automotive product. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. 2. Currently, there are numerous types of washer fluids available in the domestic market, primarily categorized into three types: summer-use washer fluid, winter antifreeze washer fluid, and special antifreeze washer fluid. Summer formulas mainly remove insect residue from windshields. Appropriate washer fluid should be selected according to different climate and temperature conditions. Generally, automotive washer fluids are classified into 0°C formula for summer use and -20°C/-35°C formulas for winter use. 3. Automotive windshield washer fluid is widely used for quick cleaning and polishing of various glass surfaces including car windshields, rearview mirrors, as well as household, office, door/window, and decorative glass surfaces.
20
5
Share

How to Open the Passenger Door of a Ferrari?

Ferrari passenger door opening method: The butterfly doors do not have obvious handles. You need to pull upward from the lower side of the door to open it. Ferrari is a renowned manufacturer of racing and sports cars, headquartered in Maranello, Italy, primarily producing Formula 1 race cars, competition vehicles, and high-performance sports cars. The Ferrari 488 is positioned as a mid-size sports car, with dimensions of 4605mm in length, 1975mm in width, and 1206mm in height, a wheelbase of 2650mm, and seating for two. In terms of interior design, this model largely continues the 468's design philosophy, featuring a black-and-red color scheme that exudes wild passion. Additionally, the gear shift buttons adopt a completely new design style.
16
0
Share

What Causes the Malfunction Light to Illuminate and Lack of Power When Accelerating?

The reasons for the malfunction light illuminating and lack of power when accelerating may include a faulty oxygen sensor or substandard fuel quality. When the engine malfunction light comes on, it indicates that the engine parameters have changed, with poor fuel combustion being the primary cause of these parameter variations. The engine malfunction signal is issued by the ECU, which controls all electronic components of the engine, such as the electronic throttle, fuel injectors, fuel pump, etc., covering various systems including intake, fuel, and ignition. After the engine malfunction light illuminates, it is essential to safely pull the vehicle over to the roadside, turn on the hazard warning lights, place a warning triangle 100 to 150 meters behind the vehicle, and contact a relevant repair shop or 4S store.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.