···
Log in / Register

What are the differences between the Lynk & Co 03+ and the Lynk & Co 03?

3 Answers
BrynleeFitz
09/03/25 5:24am
The differences between the Lynk & Co 03+ and the Lynk & Co 03 are: 1. Different body dimensions: The Lynk & Co 03+ has a body length, width, and height of 4677mm, 1840mm, and 1461mm respectively; the Lynk & Co 03 has a body length, width, and height of 4657mm, 1840mm, and 1472mm respectively. 2. Different maximum horsepower: The Lynk & Co 03+ has a maximum horsepower of 254ps; the Lynk & Co 03 has a maximum horsepower of 190ps. 3. Different maximum power: The Lynk & Co 03+ has a maximum power of 187kw; the Lynk & Co 03 has a maximum power of 140kw. 4. Different maximum torque: The Lynk & Co 03+ has a maximum torque of 350nm; the Lynk & Co 03 has a maximum torque of 300nm.
Was this review help?
8
5
Share
LeHeidi
09/15/25 6:53am
I've been driving the Lynk & Co 03 for a while, and recently switched to the 03+. The differences are quite noticeable. First, the 03+'s engine is tuned much more aggressively. The regular 03 felt adequate in power but not thrilling, while the 03+ delivers strong acceleration with a pronounced kickback sensation, significantly faster 0-100 km/h times, and more confident highway overtaking. Design-wise, the 03+ adds sporty body kits and quad exhausts, giving it a more aggressive front fascia and larger rear spoiler that turns heads, though trunk space remains unchanged. Inside, it features carbon fiber trim and sport seats with firmer bolstering that prevents fatigue on long drives. The stiffer suspension improves handling and cornering confidence, though urban fuel consumption increases slightly, requiring more frequent refueling. Maintenance intervals are shorter for the 03+, and performance tires cost extra, but safety features like autonomous emergency braking are largely identical. Ideal for driving enthusiasts with budget flexibility—definitely recommend a test drive to experience the real-world differences.
Was this review help?
3
5
Share
Expand All
LeCatherine
10/29/25 7:33am
As a Lynk & Co enthusiast, I'm particularly interested in the performance comparison between the 03 and 03+. The most appealing aspect of the 03+ is its 254 horsepower engine, which is significantly more powerful than the standard 03's 190 horsepower. Equipped with a four-wheel-drive system, it offers strong grip in rainy conditions, eliminating worries about skidding. The exterior features aerodynamic kits, and the exhaust emits a thrilling roar with an ultra-engaging startup sound, though it does come with higher fuel consumption. Price-wise, the 03+ starts several ten thousand yuan more expensive—whether it's worth the premium depends on personal preferences. The interior boasts Alcantara materials that feel premium, along with enlarged brake calipers and upgraded 19-inch wheels. It might feel a bit bumpy over speed bumps, but the overall sporty atmosphere is undeniable. The standard 03 is more suited for daily commuting with its fuel efficiency and lower maintenance costs, while the 03+ delivers more excitement, especially for weekend mountain drives. If you're considering an upgrade, you'll need to weigh whether the budget justifies the thrill.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Why is the motorcycle throttle unstable?

Motorcycle throttle instability is caused by either excessive or insufficient fuel supply. The solution to this issue is to clean the carbon deposits in the cylinder. A motorcycle is a two-wheeled or three-wheeled vehicle driven by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. A motorcycle consists of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation. The running gear mainly includes the frame, front fork, front shock absorber, rear shock absorber, wheels, etc.
3
1
Share

Should a scooter use 92 or 95 gasoline?

Scooters typically use 92 gasoline. 92 gasoline has an octane rating of 92 and a heptane rating of 8, making it suitable for vehicles with lower compression ratios. Whether a motorcycle should use 92 or 95 gasoline depends on the motorcycle's manual and its compression ratio. If the engine has a high compression ratio, it is recommended to use 95 gasoline; if the compression ratio is low, 92 gasoline is sufficient. Scooters are equipped with continuously variable transmissions and automatic clutches, without gear designs. After starting, simply twisting the throttle allows the scooter to move, and releasing the throttle will gradually slow it down until it stops. Additionally, scooters have smaller wheels compared to other vehicles, and most of their transmission systems use belt drives. The difference between 92 and 95 gasoline lies in their iso-octane content. The higher the fuel grade, the better its anti-knock performance. For domestic motorcycles, 92 gasoline is recommended due to their lower engine compression ratios. For joint-venture or imported motorcycles, 95 gasoline is advised. If the engine compression ratio is between 8 and 8.9, 92 gasoline should be used. If the compression ratio is between 8.8 and 9.8, 95 gasoline is suitable. For compression ratios above 10, 97 gasoline is required. It's important to note that the manufacturer sets the fuel grade limit for the motorcycle, so a higher fuel grade does not necessarily mean better engine performance. The specific fuel grade for a motorcycle should be chosen according to the manual.
19
0
Share

What to Do When the ETC Light Doesn't Turn On?

If the ETC light doesn't turn on or the screen is black, and there's no response when pressing the top button or inserting the ETC card, it may indicate that the ETC device is out of power or damaged. You can take the ETC device and card to a nearby ETC service center for inspection. If the damage is not caused by human factors, the device can be reactivated or replaced with a new one. Here is some relevant information about ETC: 1. When installing ETC, you need to visit a professional service center to have it installed on the windshield of your car. 2. The ETC device consumes power during use but doesn't require manual charging. There is a solar panel on the back of the ETC device that automatically charges it. 3. For newly received ETC electronic tags (OBU devices), when pressing the anti-tamper switch on the back, the red light will briefly turn on, and the screen will display messages such as 'Tag Invalid' or 'Please Insert Card,' indicating that the device is functioning normally and can be activated.
6
0
Share

What are the effects of using 95-octane gasoline in a car designed for 92-octane?

Using 95-octane gasoline in a car designed for 92-octane has no short-term effects, but long-term use can reduce the lifespan of the vehicle's ignition system, fuel injectors, and spark plugs, leading to an earlier need for major repairs. This is the consequence of prolonged mixing of different octane-rated fuels. The appropriate gasoline grade can be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a ratio between 10.0-11.5 should use 95-octane. If the compression ratio is lower, 92-octane is recommended. However, with the application of new technologies, the compression ratio alone cannot dictate the gasoline grade. High compression ratio engines can also be tuned to use lower-octane gasoline due to other influencing factors such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, higher-octane gasoline has a higher octane number and better anti-knock properties. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane gasoline, using lower-octane gasoline can cause engine knocking. The significantly lower octane number reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is generated during the upward stroke, making the engine run very unstable. Mild knocking only increases noise without significant engine damage, but noticeable knocking indicates severe engine conditions, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring. Gasoline selection considerations: Choose gasoline with appropriate volatility based on the vehicle's operating temperature. Gasoline with good volatility ensures easy cold starts and balanced engine warm-up. However, excessive volatility can easily cause vapor lock in the fuel lines, preventing the fuel pump from delivering fuel properly and leading to engine stalling. Also, consider the lead content when selecting gasoline.
5
4
Share

What is the difference between w30 and w40 engine oil?

The difference between w30 and w40 engine oil lies in their viscosity standards: 30 represents a kinematic viscosity standard of 30 at 100°C, while 40 represents a kinematic viscosity standard of 40 at 100°C. The primary functions of engine oil are to reduce friction and wear on moving parts, improve the sealing of piston rings, and cool the engine by dissipating heat from moving components. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity: 0W is -35°C; 5W is -30°C; 10W is -25°C; 15W is -20°C; 20W is -15°C; and 25W is -10°C. Better low-temperature fluidity ensures smoother cold starts for vehicles. The second number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better viscosity retention at high temperatures, which can also be interpreted as better lubrication performance under high-temperature conditions. Generally, better low-temperature fluidity ensures smoother cold starts and better engine protection. Engine oil viscosity should not be too high or too low. If the viscosity is too low, it can increase engine wear. If the viscosity is too high, it can increase engine resistance during operation, leading to reduced power and increased fuel consumption. When the engine is running, the oil forms a film on the surfaces of various components, reducing friction and internal resistance. If the oil viscosity is too low, it cannot form a stable film, which will accelerate engine wear. For full synthetic oil, the recommended replacement interval is one year or 10,000 kilometers. For semi-synthetic oil, the replacement interval is slightly shorter, typically every 7,000 kilometers or six months. When selecting engine oil, consider the following: Choose oil based on the engine's requirements. There is no need to use high-grade oil in engines with lower requirements, and lower-grade oil should not be used in engines with higher requirements. Multi-grade oil is preferable due to its cost-effectiveness, longevity, and efficiency, offering better engine protection. Due to its characteristics, multi-grade oil may appear darker and have lower oil pressure compared to conventional oil, which is normal. Since engine oil significantly impacts engine performance and lifespan, always follow the vehicle's manual for selecting the same series, service grade, and viscosity grade of oil. The oil recommended in the vehicle manual is based on the engine's performance and the regional climate, providing guidance and a significant safety margin.
5
0
Share

Why does the car Bluetooth music keep cutting in and out?

Car Bluetooth music frequently cutting in and out may be caused by the following reasons: 1. Electronic device instability: Try turning off some of the electrical devices in the car and then reconnecting. 2. System incompatibility: There may be compatibility issues with the Bluetooth device or a mismatch between the phone system and the car Bluetooth system. 3. Phone Bluetooth has other device connection records: It is recommended to delete previously connected Bluetooth devices. 4. Distance is too far: Bluetooth signal transmission capability is not very strong, generally within 10 meters; if the distance is too far, the signal may not be received.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.