What are the differences between the Lynk & Co 03 and Lynk & Co 03+?

1 Answers
SanCody
07/29/25 10:53pm
The differences between the Lynk & Co 03 and Lynk & Co 03+: 1. Different drive modes: The Lynk & Co 03 adopts front-wheel drive; the Lynk & Co 03+ adopts all-wheel drive. 2. Different engines: The Lynk & Co 03 is equipped with a 1.5L three-cylinder turbocharged engine and a 2.0L four-cylinder turbocharged engine; the Lynk & Co 03+ is equipped with a 2.0L four-cylinder turbocharged engine. 3. Different transmissions: The Lynk & Co 03 uses a 7-speed dual-clutch transmission and a 6-speed automatic manual transmission; the Lynk & Co 03+ uses an 8-speed automatic manual transmission. Both the Lynk & Co 03 and Lynk & Co 03+ are compact cars, with body dimensions of: length 4639mm, width 1840mm, height 1460mm, and a wheelbase of 2730mm.
Was this review help?
15
4
Share
More Forum Discussions

Can You Hang a National Flag on a Car?

It is permissible to hang a national flag on a car. Points to note when hanging the national flag: To uphold the dignity and standardized use of the national flag, damaged, soiled, faded, or non-compliant flags should not be hoisted or used on the car. The flag must not be hung upside down, inserted upside down, or displayed in any manner that undermines its dignity. Flag placement on the car: Small flags on the car should generally be placed in positions that do not affect driving safety. Common locations include the car antenna, A/B/C pillars, or affixed to the roof. It is not advisable to hang small flags at the front of the car as it may obstruct the driver's view. After affixing the small flag, it is recommended to use it in urban areas at speeds below 60 km/h, as high-speed driving may easily cause the flag to detach.
4
5
Share

How to Check the Progress of an Ordered Vehicle?

To check the progress of an ordered vehicle, you can follow these methods: 1. You can inquire about the details using the vehicle identification number (VIN). 2. Alternatively, you can call the 4S store for inquiries and verification. 3. The most convenient method is to ask the salesperson directly. Here are some important considerations when purchasing a car: 1. First, inspect the vehicle's exterior for any obvious paint damage, ensuring there are no scratches or dents on the body. 2. Prepare the necessary purchase documents. If you are paying in full, the 4S store will provide you with the following: purchase invoice, vehicle certificate, warranty manual, user manual, and two car keys. Ensure all post-purchase documents are complete, especially the vehicle certificate, as incomplete documentation may prevent you from obtaining a license plate. 3. Immediately after purchasing the car, you must buy car insurance, including compulsory traffic insurance (which includes the vehicle and vessel tax). 4. To obtain a license plate, you need to drive the vehicle to the vehicle management office, where they will inspect the exterior, lights, VIN, engine number, and vehicle emissions, among other items.
13
5
Share

What is the remote control range of a car key in meters?

The remote control range of a car key is approximately 30 to 50 meters. Functions of a car key: Remotely lock and unlock car doors; Long press the lock button on the remote key after turning off the engine to close the windows; Press the red horn-shaped button on the car key to locate the vehicle or send a distress signal; Long press the trunk unlock button to automatically open the trunk; Press the unlock button on the remote key once to open only the driver's door, press twice to unlock all doors. Key maintenance methods: Avoid frequently placing it together with metal objects; Do not store the spare key in the car door; Prevent the smart key from falling or being impacted; Keep the smart key away from high-temperature environments or contact with liquids; Do not place the key near electronic devices.
7
0
Share

Can a hole in the bumper be repaired?

Can a hole in the bumper be repaired? Extensive damage to the bumper: During daily driving, minor collisions are almost unavoidable. As the primary buffer components in collisions, the front and rear bumpers are often the most vulnerable. Sometimes, even a small stone on the highway can cause a hole in the bumper. Modern car bumpers are primarily made of plastic, typically polypropylene-based. If the damage to the bumper is extensive, it is not advisable for the owner to attempt repairs themselves, as severe damage may not be worth fixing. In cases of large-scale damage, it is more appropriate to notify the insurance company for a claim. Small puncture holes: If fragments are available, they can simply be welded back using a welding torch. If no fragments are present, a piece can be taken from a scrap bumper. The fragment should then be welded onto the damaged area. Finally, use a touch-up paint pen to restore the paint.
4
0
Share

What Causes the Water Temperature Alarm to Trigger Immediately Upon Ignition?

Vehicle water temperature alarm triggering immediately upon ignition may be caused by insufficient coolant or a faulty liquid level sensor. Solutions for water temperature gauge alarm: When this issue occurs, the first thing to check is whether the coolant is insufficient. If the coolant level is low, promptly add coolant and restart the vehicle to see if the warning light remains on. If the coolant level is adequate but the water temperature alarm persists, then the liquid level sensor is likely malfunctioning. For this fault, it is recommended to visit a 4S shop for professional inspection by a technician. The fault source can be identified through the vehicle's self-diagnosis system. Precautions when handling water temperature gauge alarms: Do not rush to turn off the engine, as excessively high water temperature can cause the piston, cylinder walls, cylinder block, crankshaft, etc., to overheat, thinning the engine oil and losing its lubricating effect. If the engine is turned off at this point, the components are in an expanded state with very small clearances, which may cause some soft metals to detach or even lead to cylinder seizure. When cooling down, never pour cold water on the engine, as this may cause the engine block to crack due to sudden cooling. Never open the radiator cap when the engine is hot to avoid being scalded by the high-pressure steam released.
19
3
Share

How to Replace the Battery in a Tiguan L Key?

The battery replacement for the Tiguan L key involves turning out the key head, removing the back cover in the direction of the arrow, using a suitable thin tool to pry out the battery from the battery compartment, placing the new battery, pressing it into the battery compartment in the direction of the arrow, and then replacing the cover. Tiguan L Seating Layout: The Tiguan L has been upgraded to a 7-seater model with a 2+3+2 seating arrangement, catering to the needs of larger families. The most notable feature is the flat-folding design of the third-row seats, providing flexible and versatile space configurations. When the third-row seats are folded down, the trunk capacity expands to 1780L, easily meeting various travel demands of consumers. Tiguan L Power: The Tiguan L 2.0T comes in two versions with different power outputs. The low-power 2.0T version delivers 186 horsepower with a maximum torque of 320 Nm, achieving maximum torque between 1500-4000 rpm and maximum power between 4100-6000 rpm, paired with a 7-speed dual-clutch transmission.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.