What are the differences between the Lynk & Co 02 Yao Edition and Jin Edition?

What does 175/65r14 tire mean?

175 represents the tire cross-section width of 175MM; 70 represents the aspect ratio; 14 represents the rim size of 14 inches. More related introductions are as follows: 1. Tire specifications: Tire specifications are commonly represented by a set of numbers, with the first number indicating the tire section width and the latter indicating the rim diameter in inches. 2. Letters or symbols: Some tires also contain other letters or symbols with special meanings: "X" indicates high-pressure tires; "C" indicates reinforced tires; "B" indicates bias-ply tires; "-" indicates low-pressure tires. M and S are abbreviations for Mud and Snow in English, indicating that these tires are suitable for use on snowy and muddy roads. 3. There is also a special mark on the tire: wear replacement indicator. Different manufacturers have different markings. Michelin uses a small tire man, Pirelli displays a TWI mark, and some tires use conspicuous white to indicate it.

6

0

Share

What is the speed limit on the Beijing-Tibet Expressway?

On the Beijing-Tibet Expressway, the speed limit is 80 to 100 kilometers per hour in hilly or valley sections, and 120 kilometers per hour in plain areas. Below is an introduction to the Beijing-Tibet Expressway: 1. Overview: The Beijing-Tibet Expressway, also known as the Beijing-Lhasa Expressway, abbreviated as G6, has a planned length of 3,718 kilometers and an operational length of 1,830 kilometers. Construction began in 1996, and the entire route (except for the Golmud-Lhasa section) was completed on October 20, 2016. 2. Speed Limit: The speed limit on the Beijing-Tibet Expressway is 80 to 100 kilometers per hour in hilly or valley sections and 120 kilometers per hour in plain areas.

19

0

Share

What is the Difference Between Baked Paint and Spray Paint for Calipers?

There are several differences between baked paint and spray paint for calipers: 1. Process difference: Baked paint involves applying three layers of primer and four layers of topcoat on the base material, with each layer being sent into a dust-free, constant-temperature baking room for curing. Spray paint, on the other hand, involves applying a base material on the substrate, spraying paint over it, and allowing it to air dry naturally. 2. Paint film difference: Baked paint has smooth edges, uniform color, and full color saturation. Spray paint has rough edges, uneven color, and less saturated color. 3. Texture difference: The surface of baked paint is smooth, with no texture or orange peel effect. The surface of spray paint has texture, is not smooth, and exhibits an orange peel effect.

15

3

Share

How many times does a sedan need to be inspected annually after 10 years?

For sedans that are over 10 years old, an annual inspection is required. For those over 15 years old, inspections are required every six months. Below are the relevant details: 1. Inspection regulations: Sedans over 10 years old must undergo an annual inspection, while those over 15 years old require inspections every six months. For new vehicles, within the first 6 years, they are exempt from inspection twice (inspection marks must be applied for every two years, but no physical vehicle inspection is required). 2. Important notes: In the 6th and 8th years, the vehicle must undergo an on-site inspection. For vehicles over 10 years old, the original inspection cycle still applies, meaning vehicles aged 10 to 15 years require an annual inspection, and those over 15 years require inspections every six months. Vehicle owners can apply for an inspection compliance mark at the local vehicle management office up to 3 months before the expiration of the current inspection period.

19

3

Share

What are the prerequisites for taking the Subject 1 test?

The prerequisites for taking the Subject 1 test are as follows: 1. Vision: For applicants applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked or corrected visual acuity of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other driving license types, the naked or corrected visual acuity of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 2. Other aspects: No red-green color blindness. The actual driving school physical examination content should match the vision requirements. The ability to distinguish the direction of sound sources with each ear 50 centimeters away from a tuning fork. Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. Normal motor function.

15

1

Share

What Operations Can Cause Engine Stalling?

1. Abnormal resistance value of the crankshaft position sensor: Causes the crankshaft speed signal to disappear after the engine warms up, leading to engine stalling; 2. Malfunction of the fuel pump: Changes in resistance after prolonged operation prevent normal functioning and the provision of proper fuel pressure, resulting in engine stalling when warm; 3. Ignition system failure: Overheating of the ignition module leads to malfunction, causing ignition voltage failure and engine stalling; 4. Abnormal throttle signal voltage: Improper control by the engine computer can cause the vehicle to stall while driving; 5. Loose wiring connections: Result in sporadic engine stalling. Such faults require comprehensive inspection. It is recommended to leave the vehicle at a 4S shop for mechanics to conduct a test drive and check, ensuring the fault is resolved before driving again to avoid compromising driving safety.

1

0

Share

What are the differences between the Lynk & Co 02 Yao Edition and Jin Edition?

What does 175/65r14 tire mean?

What is the speed limit on the Beijing-Tibet Expressway?

What is the Difference Between Baked Paint and Spray Paint for Calipers?

How many times does a sedan need to be inspected annually after 10 years?

What are the prerequisites for taking the Subject 1 test?

What Operations Can Cause Engine Stalling?

What is the appropriate level to add coolant to a Nissan Sylphy?

What is the horsepower of the Fista?

Where is the fuse box of Wuling Hongguang S located?

Which factory produces Golden Shield tires?