What are the differences between the Leopard 2030abcd?

1 Answers
VonPeter
07/30/25 10:11am
The differences between the Leopard 2030abcd are: imported and domestically assembled. Changfeng Leopard had a cooperation agreement with Mitsubishi, so it once assembled the V33/V31. The domestic version of the V33 is called the Black Diamond 2030, with manual and automatic versions differentiated as ABCD. The Leopard 2030A features a Super Select 4WD system, which is more advanced than full-time 4WD and operates via a transfer case lever. More details are as follows: 1. Overview: V31, V32, and V33 are the chassis codes for the second-generation Pajero introduced by Leopard, with the main difference being the engines installed. 2. V31: Equipped with a 4G64 engine, with a displacement of 2.4L. All CFA6470 models from Leopard belong to this series. 3. V32: Equipped with a 4G54 engine, with a displacement of 2.6L. This model was only available as an import, and Leopard did not produce it. 4. V33: Equipped with a 6G72 V6 engine, with a displacement of 3.0L. All CFA2030 models from Leopard belong to this series.
Was this review help?
4
4
Share
More Forum Discussions

Is 220 kPa Tire Pressure Too Low for the Excelle?

The tire pressure of 220 kPa for the Excelle is considered low. The normal tire pressure range for motor vehicles is between 230 kPa and 250 kPa. Both below and above this normal range can affect the vehicle's driving performance. Hazards of Low Tire Pressure Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and prone to deviation, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to tire blowouts; Increases tire body deformation, making the tire sidewalls prone to cracking, while generating flexing movements that cause excessive heat, accelerating rubber aging, fatigue of the cord fabric layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders.
13
2
Share

What restrictions apply to out-of-town vehicles in Beijing?

Beijing's traffic restrictions for out-of-town vehicles, which apply to motor vehicles with license plates (including temporary plates) issued by other provinces or cities, must adhere to the following regulations: 1. Within the Sixth Ring Road: Vehicles entering roads within the Sixth Ring Road (excluding the Sixth Ring Road itself) must obtain a Beijing entry permit. 2. Prohibition of entry into the Sixth Ring Road: From 6:00 to 24:00 daily, trucks and specialized operation vehicles are prohibited from entering roads within the Sixth Ring Road (excluding the Sixth Ring Road itself). 3. Fifth Ring Road: On workdays, from 7:00 to 9:00 and 17:00 to 20:00, passenger vehicles are prohibited from entering roads within the Fifth Ring Road (including the Fifth Ring Road itself). From 9:00 to 17:00 on workdays, traffic management measures for peak-hour restrictions based on the last digit of the license plate number are implemented, with the restricted area being roads within the Fifth Ring Road (including the Fifth Ring Road itself). The rotation method for the last digit of the license plate follows Beijing's motor vehicle license plate rotation system. 4. Second Ring Road main route: On the main route of the Second Ring Road (entire route), from 6:00 to 22:00 daily, passenger vehicles with license plates (including temporary plates) issued by other provinces, autonomous regions, or municipalities are prohibited from passing through.
1
0
Share

What Are the Common Car Maintenance Items?

Common maintenance items include: changing engine oil and oil filters, air filters, brake system maintenance, tire care, chassis inspection, and other routine checks. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down deterioration, and extend the service life. Below is more detailed information about car maintenance: 1. A dirty air filter can obstruct fresh air from entering the cylinders, leading to incomplete combustion, reduced power, and excessive emissions. Modern air filters typically use paper filter elements. When cleaning, avoid using water or oil; instead, use the tapping method or blowing method. The tapping method involves gently tapping the end of the filter element to remove dust. 2. The brake system is crucial for vehicle safety. You can determine whether to replace the brake pads by checking if the brake warning light on the dashboard is illuminated. It's best to inspect the brake system during every maintenance session and replace brake components early if needed. 3. Tire maintenance is essential since tires endure the most wear during daily driving. Inspect tires for traction capability, signs of aging, and proper tire pressure. 4. The chassis is also vital. Check for oil leaks, unusual noises, or instability while driving. If such issues occur, it indicates a problem with the chassis, which should be repaired promptly.
2
3
Share

What happens when a car is exposed to the sun?

Exposing a car to the sun may lead to the following issues: 1. Engine: The engine is prone to problems. In high-temperature environments, the engine's cooling system has a reduced heat dissipation temperature difference and poor heat dissipation capability, making the engine susceptible to overheating. 2. Oil system: The oil system is prone to problems. Under high temperatures, the oil and related components may experience a series of issues, accelerating component wear and severely affecting the engine's lifespan. 3. Voltage issues: The battery may experience unstable voltage in high temperatures. When the battery temperature is high, the electrodes may oxidize due to insulation layer aging, especially the negative terminal, which can develop white oxide deposits on the electrode head, leading to unstable battery voltage.
4
2
Share

Can Motorcycles Use ETC?

Motorcycles cannot apply for ETC and therefore cannot pass through ETC exits. How ETC Works: ETC operates through an onboard electronic tag installed on the vehicle's windshield, which communicates via dedicated short-range communication with microwave antennas in the ETC lanes at toll stations. This system uses computer networking technology to process transactions with banks in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay fees. ETC Usage Notes: The ETC transaction sensing range is 8 meters. To prevent accidental charges for the vehicle ahead—due to ETC device malfunctions or absence—maintain a distance of at least 10 meters from the vehicle in front. The ETC lane recognition speed is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to failed transactions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag becomes detached or loose, may deactivate the tag. In such cases, the device can be taken to the bank where the ETC card was issued or to a highway service center for inspection. If the detachment is not due to human error, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause transaction failures. Follow the guidance of on-site staff to switch to a manual MTC lane and pay via cash or card. Excessively thick windshields may impair signal reception. This is particularly relevant for vehicles that have undergone windshield replacements after accidents or for those with modified front windshields.
6
3
Share

What are the reasons for severe car shaking and inability to accelerate?

Car shaking severely and inability to accelerate can be caused by the following reasons: 1. Dirty air filter: The air filter is designed to protect the engine and reduce wear. It should generally be replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine shaking. Simply replacing the filter can solve this issue. 2. High-voltage line break: A high-voltage line break refers to the breakage of the wire core inside the high-voltage line, which can affect ignition and cause engine shaking. Use a multimeter to measure the resistance and replace the one with significantly higher resistance. 3. Spark plug lifespan: Spark plugs have a limited lifespan. After exceeding 30,000 to 40,000 kilometers, their ignition efficiency significantly decreases, which can affect ignition. This is the most common issue, and replacing all the spark plugs can resolve it.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.