What are the differences between the Kia KX5 and the Sportage?

1 Answers
VonBrooke
07/29/25 11:16pm
The differences between the Kia KX5 and the Sportage mainly lie in four aspects: price, overall body dimensions, overall configuration, and power output. Below is a detailed comparison of the differences between the Kia KX5 and the Sportage: 1. Price: The top trim of the Sportage has a lower official price than the top trim of the Kia KX5. 2. Overall Body Dimensions: The top trim of the Sportage has a shorter body length compared to the top trim of the Kia KX5. Additionally, the wheelbase of the Sportage top trim is shorter than that of the KX5 top trim. 3. Overall Configuration: The top trim of the Kia KX5 offers more comprehensive features than the top trim of the Sportage. 4. Power Output: The top trim of the Kia KX5 delivers more powerful performance than the top trim of the Sportage.
Was this review help?
20
2
Share
More Forum Discussions

What Causes the Clicking Sound When Steering While Reversing?

Experiencing a clicking sound when steering while reversing is a normal backlash noise and does not indicate a vehicle malfunction. The brake pads are mounted on the caliper bracket, and under normal conditions, they fit tightly against the forward-facing end of the bracket without any gap, so no noise occurs when braking while moving forward. However, when reversing, the direction of movement is opposite, creating a slight gap between the brake pads and the rear end of the bracket. During braking, the brake pads may impact the rear end of the bracket, resulting in the clicking sound.
1
2
Share

How to Open the Fuel Tank Cap of a Volkswagen?

Volkswagen's fuel tank cap opening method: 1. Locate the fuel tank cap release switch on the front left side of the door; 2. Lift the release switch until you hear the sound of the fuel tank cap opening; 3. Turn the inner fuel tank cap counterclockwise to open it; 4. After refueling is completed, tighten the inner fuel tank cap clockwise; 5. Close the outer fuel tank cap to complete the entire operation. Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's leading automobile manufacturers. Volkswagen's main models include sports cars, compact family cars, the EOS coupe, Volkswagen CC, Volkswagen Phaeton, and Volkswagen Audi.
17
2
Share

Why is one reversing radar not working?

The reason why one reversing radar is not working is that the circuit of the car's reversing radar has malfunctioned. The solution is to promptly go to the car's 4S store or a repair shop to inspect or replace the reversing radar circuit. The reversing radar, also known as the reverse collision avoidance radar or parking assist device, is a safety auxiliary device for parking or reversing a car. It consists of ultrasonic sensors, a controller, and a display. The reversing radar generally has four probes, installed at the rear or on both sides of the car, two on each side. When the gear lever is shifted into reverse, the reversing radar automatically starts working. When the probe detects an object behind, it emits a beep as a warning. As the vehicle continues to reverse, the frequency of the alarm sound gradually increases, eventually becoming a continuous beep.
9
1
Share

How often should small car tires be rotated?

Small car tires should be rotated approximately every 30,000 kilometers. After rotation, it is essential to perform tire dynamic balancing again. Failure to do dynamic balancing may cause steering wheel vibration and body shaking while driving. Proper tire usage mainly focuses on reducing the wear rate and preventing abnormal wear and damage, thereby extending the tire's service life. Situations requiring tire replacement: 1. Tires must be replaced when worn down to the wear limit indicator; 2. Aged tires; 3. Tires with tread deformation or bead damage, those with sidewall damage from driving under-inflated, or those corroded by chemicals should not continue to be used; 4. Bulging tires must not be used; 5. Other damages that affect tire safety also prohibit continued use.
4
2
Share

Where is the OBD interface of the Haval H6?

The OBD interface of the Haval H6 is located under the steering wheel, above the accelerator pedal or brake pedal. It is a rectangular 16-pin interface, which comes with its own power supply system. When a device is inserted, there will be an indicator light showing the working status, but most of the time it is only used for data reading tasks. The Haval H6 has a body length, width, and height of 4653mm, 1886mm, and 1730mm respectively, with a wheelbase of 2738mm. It is equipped with a 2.0T turbocharged engine, paired with a 7-speed dual-clutch transmission. The maximum power of this engine is 155kW, and the maximum torque is 325Nm.
4
0
Share

Where is the cabin air filter located in the 2013 Jetta?

The cabin air filter in the 2013 Jetta is located on the passenger side, beneath the glove compartment. During installation, please note that the filter has an arrow on its side - this arrow should point toward the driver's seat direction. The cabin air filter is a crucial component of the air conditioning system. When air enters the vehicle through the fan, the filter removes pollutants such as exhaust fumes, dust, powder, bacteria, and particulate matter, providing clean and fresh air for the cabin and safeguarding the health of passengers. The 2013 Jetta measures 4487mm in length, 1706mm in width, and 1470mm in height, with a wheelbase of 2603mm. It is equipped with a 1.6L naturally aspirated engine that delivers a maximum power output of 81kW and peak torque of 160Nm.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.