What are the differences between the Jog 100 and Jog 125?

How to Remove the Drive Shaft of a Cruze?

The method for removing the drive shaft of a Cruze is as follows: 1. Remove the drive shaft from the vehicle, starting by detaching the rear end of the main drive shaft. The removal should begin from the rear end of the rear section of the drive shaft, proceeding forward sequentially. First, unscrew the four bolts on the universal joint fork connected to the drive axle, then detach the rear end of the main drive shaft; 2. Next, unscrew the four bolts on the universal joint fork connected to the intermediate drive shaft; detach the front end, allowing the entire main drive shaft to be removed; 3. Loosen the connecting bolts between the intermediate support and the vehicle frame crossbeam, then detach the end with the intermediate support. Finally, loosen the nuts connected to the parking brake drum and remove the entire intermediate drive shaft.

10

4

Share

How to Troubleshoot Water Leakage Under the Driver's Seat?

Methods to troubleshoot water leakage under the driver's seat are as follows: 1. Check for blockages: Inspect the drainage holes of the sunroof, doors, and air conditioning system for any blockages. If blocked, clean them thoroughly and drain the accumulated water. 2. Check for replacements needed: Examine the sealing rubber rings and strips of the sunroof and doors for any deformation or aging. If found, replace the rubber components. Reasons for water leakage in the car cabin are as follows: 1. Blocked sunroof drainage holes: Sunroof drainage holes are prone to blockage by leaves and dust. Once blocked, rainwater cannot drain promptly during rain, leading to water seepage into the cabin. 2. Aging of sunroof sealing rubber rings: Rubber components harden and age over time. When the sunroof rubber rings age, their sealing effectiveness decreases, causing leaks during rain. Additionally, using high-pressure water guns or strong acidic/alkaline cleaners during sunroof maintenance can deform or age the rubber rings. 3. Blocked air conditioning drainage holes: During operation, the car's air conditioning system produces condensation in the evaporator. If the drainage hole is blocked, the condensation water may leak from the co-driver's side. 4. Poor door sealing: Doors are equipped with sealing strips. If improperly installed or aged and hardened, the door's sealing effectiveness decreases, allowing water ingress during rain or when driving through flooded areas. 5. Blocked door drainage holes: Due to their low position, door drainage holes are easily clogged by mud. If rainwater accumulates in the door and cannot drain, it may seep into the cabin.

9

4

Share

How to automatically tilt the rearview mirror when reversing in the Volkswagen Phideon?

Turn the mirror adjustment button on the door armrest to the R position, then shift the car into reverse gear to automatically tilt the mirror. Below is an introduction to the Volkswagen Phideon: 1. The overall body design of the Phideon follows the design concept of the previous CCoupe concept car, featuring Volkswagen's family-style front design. The front grille integrates with the LED headlights and extends to the sides of the body. The side waistline runs through the entire body and extends above the taillights. Additionally, the taillight design is particularly noteworthy, with a double-layer layout where the lower layer tapers inward, creating a staggered effect. 2. The interior of the Volkswagen Phideon maintains the standard Volkswagen style, but it stands out in terms of features. The new model is equipped with advanced technologies such as a night vision system and a heads-up display, as well as electrically adjustable rear seats with independent ventilation/heating functions. 3. In terms of power, the Volkswagen Phideon is expected to offer multiple gasoline and diesel engines or a plug-in hybrid system, paired with an automatic transmission. Furthermore, the Phideon will also feature an air suspension system and offer five driving modes to choose from.

2

3

Share

Why does the Tayron have gearshift jerking?

The gearshift jerking in the Tayron is caused by a mismatch between the engine speed and the current vehicle speed, resulting in a speed difference between the engine and the clutch. Below are some relevant details about the Tayron: 1. The Tayron is an SUV model under FAW-Volkswagen, based on the European version of the Tiguan. It comes equipped with features such as a 360° panoramic camera, third-generation intelligent parking assist system, blind spot detection, and also includes the TJA Traffic Jam Assist system. 2. In terms of interior design, it adopts the latest family-style layout with the dashboard slightly tilted towards the driver's seat for easier operation. The lower part of the dashboard and the gearshift area follow a more traditional, simple layout. A 10.3-inch full LCD instrument cluster paired with a 9.2-inch central touchscreen and 10-color adjustable ambient lighting gives the cabin a more youthful and stylish feel. 3. The Tayron features Volkswagen's new family design language, which has been gradually adopted across several new models. Compared to previous Volkswagen designs, the Tayron appears more youthful and fashionable. The front fascia features a horizontal grille paired with LED headlights on both sides, effectively stretching the visual width. The waistline extends from the headlights to the taillights, while the rear design is rounded and bold, with strong lines creating a muscular appearance.

17

2

Share

How Many Cylinders Does the Cruze Have?

The Cruze is equipped with a three-cylinder engine. Below are the relevant details about the Cruze: 1. The Cruze comes with two engine options: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine. The 1.0-liter turbocharged three-cylinder engine delivers a maximum power of 92 kW and a maximum torque of 170 Nm, while the 1.3-liter turbocharged engine produces a maximum power of 120 kW and a maximum torque of 230 Nm. 2. The dimensions of the Cruze are 4630mm in length, 1798mm in width, and 1485mm in height, with a wheelbase of 2640mm. 3. The Cruze comes standard with LED lighting technology across all models. The sharp-looking LED automatic sensing headlights feature Chevrolet's classic dual-element design, incorporating a three-dimensional LED light guide daytime running light. It utilizes the segment-leading light guide tube with thickened LIGHTINGBLADE double-layer light guide technology, ensuring more uniform light distribution.

13

2

Share

What is the normal temperature range for a car's coolant gauge?

The normal operating temperature for a car's coolant is maintained between 80~100℃. More details about car coolant temperature are as follows: 1. Within a certain range, the normal temperature is 90℃, indicating the engine has reached stable operating temperature and optimal working condition. 2. After starting the vehicle, the coolant temperature rises rapidly. When the needle reaches the central position, the heat exchange reaches equilibrium and the coolant temperature stabilizes. The best time to start driving is when the temperature reaches this middle position, which explains why we need to warm up the car before driving. 3. Overheating on the temperature gauge may indicate cooling system malfunctions, mainly including coolant leaks, insufficient coolant, radiator fan failure, or water pump circulation failure.

2

0

Share

What are the differences between the Jog 100 and Jog 125?

How to Remove the Drive Shaft of a Cruze?

How to Troubleshoot Water Leakage Under the Driver's Seat?

How to automatically tilt the rearview mirror when reversing in the Volkswagen Phideon?

Why does the Tayron have gearshift jerking?

How Many Cylinders Does the Cruze Have?

What is the normal temperature range for a car's coolant gauge?

Why is Volkswagen Said to Burn Engine Oil?

Are Electric Vehicles Exempt from Highway Tolls?

What to Do When a Car Tire Gets Punctured?

What Does Rear Axle Ratio Mean?