What are the differences between the JAC Refine M4 and the Maxus G10?

1 Answers
OVictoria
07/29/25 8:28pm
The differences between the JAC Refine M4 and the Maxus G10 are as follows: Different body dimensions: The JAC Refine M4 has body dimensions of 5200mm, 1890mm, and 1980mm, with a wheelbase of 3080mm, while the SAIC Maxus G10 performs better with body dimensions of 5168mm, 1980mm, and 1928mm, and a wheelbase of 3198mm. Different power outputs: The JAC Refine M4 has a maximum power of 140kW and a maximum horsepower of 190Ps, while the SAIC Maxus G10 can reach a maximum power of 165kW and a maximum horsepower of 224Ps.
Was this review help?
13
3
Share
More Forum Discussions

What is the function of the Nissan Sylphy's OFF button?

The function of the Nissan Sylphy's OFF button is to deactivate the auto start-stop feature. Below are detailed specifications of the Sylphy: 1. Vehicle Positioning: The Sylphy is a compact car under the Nissan brand, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. 2. Powertrain: The Sylphy is equipped with a 1.6L naturally aspirated engine across all variants. There are 4 models available, offering a choice between manual and continuously variable transmission (CVT). The engine delivers a maximum power of 93.0kW, maximum horsepower of 126PS, and maximum torque of 168.0N·m. 3. Suspension: The Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension.
12
2
Share

What Causes the Brake Light to Stay On After Locking the Car?

Reasons are as follows: 1. The brake pads need replacement; if you drive without releasing the handbrake, the light will also stay on. 2. Insufficient brake fluid, which plays a crucial role in the car's braking system. When the driver presses the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. 3. The tail light bulb is damaged. The brake fluid reservoir has upper and lower lines; if the fluid level is below the lower line, the sensor next to the reservoir will detect this and reflect it through the brake light on the dashboard. If the brake fluid level drops rapidly, it indicates a leak in the braking system.
10
1
Share

What does BMW PDC failure mean?

BMW PDC failure refers to the malfunction of the Parking Distance Control system. Below is a brief introduction about BMW: 1. Basic information: BMW (Bavarian Motor Works), fully known in Chinese as Bayerische Motoren Werke AG, is a German luxury automobile brand. BMW's vehicle series include the i, X, Z, and pure numeric models, as well as series such as 1, 2, 3, 4, 5, 6, 7, and 8, along with the M series (BMW's official high-performance modification division) which is based on improvements to the existing series. 2. Headquarters address: BMW was founded in 1916, with its headquarters located in Munich, Bavaria, Germany. The blue and white logo of BMW represents the colors of the Bavarian state flag, where the company's headquarters is located.
3
2
Share

What Causes Brake Failure When Reversing?

Reasons why brakes fail when reversing: Excessive brake pad wear: Brake pads have a service life. Once they are excessively worn, they should be replaced promptly. Otherwise, it can easily lead to brake failure and may also affect the brake disc. In severe cases, it can cause damage to the braking system. Deteriorated brake fluid: Brake fluid, commonly known as brake oil, absorbs moisture from the air during long-term use, which lowers its boiling point. When the boiling point drops significantly, it can affect the vehicle's braking performance, resulting in brake failure. Therefore, brake fluid needs to be replaced regularly. Newly installed brake pads: Newly installed brake pads have not yet been properly broken in with the vehicle. As a result, they may not provide optimal braking performance immediately after installation. New brake pads require a certain break-in period to maximize their effectiveness.
12
2
Share

What to Do If You Overfill the Engine Oil in a Motorcycle?

Overfilling the engine oil in a motorcycle can lead to engine overheating, incomplete clutch separation, and reduced power. Below are some precautions to take when adding oil to a motorcycle: 1. Choose the Right Oil: Strictly follow the manual's specifications for the brand and grade of lubricating oil, and try to purchase from reputable stores or direct manufacturers. Be cautious of counterfeit or substandard products when selecting a lubricant brand. 2. The Right Amount: Avoid adding too much or too little oil. The correct oil level should be between the upper and lower marks on the dipstick. 3. Do Not Mix Oils: Never mix different brands of oil or use new and old oil together. Oils from different brands or origins should not be mixed, as their chemical compositions and formulations vary. Mixing them can cause chemical reactions, leading to oxidation and deterioration, severely affecting lubrication performance. This can result in engine overheating, accelerated wear of components, and ultimately shorten the engine's lifespan.
15
1
Share

How often should the transmission oil of a 4.2-meter truck be changed?

Transmission oil is generally changed every 3 years or 60,000 kilometers, depending on whether the transmission oil has deteriorated. Below are specific details about deteriorated and normal transmission oil: 1. Deteriorated: With the engine idling and the gear selector in the P position (N position for Nissan vehicles), pull out the dipstick to observe the oil on it. Drop a small amount of oil onto a filter paper. If the oil appears black, leaves obvious sludge on the filter paper, emits a strong odor or burnt smell, appears cloudy when a few drops are placed on a steel plate, or feels gritty and has poor viscosity when rubbed between fingers, it indicates deterioration. 2. Normal: Odorless, semi-transparent, red or yellow in color, ATF oil is clear with minimal impurities (visible to the naked eye), allowing for an appropriately extended maintenance cycle.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.