What are the differences between the Izoa and the CHR?

1 Answers
StAutumn
07/24/25 8:34pm
The differences between the Izoa and the CHR are: 1. Different manufacturers: the Izoa is produced by FAW Toyota; the CHR is produced by GAC Toyota. 2. Different original tires: the Izoa is equipped with Dunlop Enasave tires; the CHR is equipped with Michelin Primacy 4 tires. The body dimensions of both the Izoa and the CHR are 4405mm in length, 1795mm in width, and 1565mm in height, with a wheelbase of 2640mm, a fuel tank capacity of 50 liters, and a trunk capacity of 295 liters. Both the Izoa and the CHR are equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 171ps, a maximum power of 126kw, a maximum torque of 203nm, and both are matched with a 10-speed continuously variable transmission.
Was this review help?
10
0
Share
More Forum Discussions

What is the Difference Between a Sedan and a Three-Box Car?

Here are the differences between a three-box car and a sedan: 1. Different structure: A three-box car consists of the front engine compartment, the middle passenger compartment, and the rear luggage compartment. A sedan extends the passenger compartment approximately at the same height towards the rear, combining the rear luggage compartment and the passenger compartment into one, reducing it to two 'boxes'—the engine compartment and the passenger compartment—without a protruding rear luggage compartment. 2. Different features: A three-box sedan is high in the middle and low at both ends, appearing symmetrical from the side, with an aesthetically pleasing and elegant design. The disadvantage of a three-box sedan is its longer body size, making it less convenient to drive and park in crowded big cities. A sedan has a spacious rear door, giving it flexible and versatile usage characteristics. By folding down the rear seats, you can obtain a much larger cargo space than a three-box car, which can be used to transport many large household appliances and items.
14
5
Share

What Causes the Steering Wheel of Baojun to Stick?

Baojun steering wheel sticking may be caused by the following reasons: Input sensor malfunction For example, a fault in the grating angle measurement sensor may prevent the ECU from properly obtaining user operation parameters. ECU malfunction: Calculation deviations in the ECU itself may result in vehicle control that contradicts the user's operational intentions. Improper driving: It may be due to prolonged driving with an unbalanced vehicle body, causing deviations in the yaw angle sensor position. Solutions for steering wheel sticking: Minor steering wheel sticking can sometimes be resolved by adjusting the steering wheel up and down and then returning it to its original position; in other cases, turning the steering wheel lock-to-lock a few times while stationary may solve the sticking. If the issue cannot be resolved using the above methods, it is recommended to visit a 4S store for inspection and repair as soon as possible.
9
2
Share

What are the new items added to Subject 2?

New items added to Subject 2: Some regions have added simulated tunnel driving and simulated driving in rainy (foggy) and slippery road conditions, totaling 7 items; while in Shanghai, Subject 2 includes 9 items, adding simulated tunnel driving, parking for toll collection, emergency stopping, and narrow road U-turns. Below are some precautions for the Subject 2 test: 1. Adjust the seat properly: Before starting, ensure the seat is adjusted and the seatbelt is fastened before verifying fingerprints. 2. Follow the test item rules: Each test item in the examination area is monitored by GPS positioning. The control line (yellow dashed line) of each item represents the test area for that item. Once the front of the vehicle passes the control line, it means the test for that item has begun, and the test rules for that item must be followed to completion. 3. Correct mistakes promptly: When an operational error is detected, correct it immediately to ensure accuracy and reduce the chance of point deductions.
12
5
Share

What Causes the Alarm to Sound a Few Minutes After Locking the Car?

The alarm sounding a few hours after locking the car is due to the vehicle alarm system either failing to detect the front sensor or receiving an alarm signal from the front sensor, which then triggers the alarm. The solution is to inspect the sensor that triggered the alarm and check the vehicle's wiring. Below is an introduction to car alarm systems: 1. Function: A car alarm is an alarm device installed in a vehicle. If someone hits, impacts, or moves the car, the sensor sends a signal to the controller indicating the intensity of the vibration. Depending on the vibration intensity, the controller will emit a warning sound or activate a full alarm. This serves to deter thieves and alert the owner. 2. Development: From the 1990s to the present, car alarms have developed rapidly and are widely used. As car alarm technology has matured, cost control is no longer an issue, and car alarms have become essential equipment for every car owner. In the next decade, it is believed that car alarm systems will incorporate more advanced technologies. In-vehicle GPS receivers have opened up vast possibilities in the security field. If the receiver is connected to the alarm system controller, it can report the vehicle's location to the owner or the police at any time.
18
3
Share

What is the tire size for Kia K3?

The Kia K3 uses two types of tires, one with the model number 205/55R16 and the other with 225/45R17. More details about the Kia K3 are as follows: 1. The new Kia K3 is equipped with a 1.6T diesel engine, a 1.4T gasoline engine, and a 1.8L gasoline engine. The 1.6T engine has a maximum power output of 100kW and a maximum torque of 300Nm, paired with a 7-speed dual-clutch transmission. The 1.4T engine delivers a maximum power of 94kW and a maximum torque of 156Nm, matched with either a 6-speed manual or a 6-speed automatic transmission. The 1.8L gasoline engine produces a maximum power of 107kW and a maximum torque of 175Nm, coupled with a 6-speed automatic transmission. 2. The exterior of the new Kia K3 adopts the latest family design language, featuring a large honeycomb grille with a bold outline, closely resembling the current Kia K4. Additionally, the front and rear headlights have undergone upgraded styling adjustments.
1
1
Share

Can I Turn on the Heater After Just Applying the Front Windshield Film?

Since the moisture on the newly applied front windshield film hasn't dried yet, it's generally acceptable to turn on the heater. However, avoid moving or rolling down the window glass within three days, and refrain from washing the filmed glass with water to prevent the film from shifting or even peeling off. Below is an introduction to car window tinting: Precautions After Applying Car Window Film: After applying the film, avoid rolling down the windows for three days; do not wash the car within three days; if the vehicle has a sunroof, avoid opening it while driving, especially at high speeds, during the first three days. In winter, it's recommended not to roll down the windows or wash the car for a week after applying the film. The front and rear windshields may take about a month to dry completely. If bubbles appear at the edges of the film, they should be repaired at the installation site within 24 hours. Delayed treatment may not be effective as the adhesive around the bubbles will have dried. Functions of Car Window Film: The primary functions include blocking ultraviolet rays, reducing heat, preventing injuries from shattered glass, reducing glare, and, with the one-way visibility feature of some films, protecting personal privacy.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.