What are the differences between the Highlander Elite and Luxury editions?

1 Answers
SanRicardo
07/30/25 4:17am
Here are the differences between the Highlander Elite and Luxury editions: 1. Price: The Luxury edition is priced higher than the Elite edition. 2. Features: The Luxury edition adds keyless entry, one-touch start, panoramic power sunroof, cruise control, rearview camera, leather seats, dual-zone automatic air conditioning, and upgrades the tires from 245/60R18 to 245/55R19 specifications—while maintaining the same contact area, the wheel diameter is larger. 3. Safety: The Elite edition includes GPS navigation and G-book functionality.
Was this review help?
9
2
Share
More Forum Discussions

What Causes the ABS Light to Illuminate in Snowy Conditions?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by mud, sludge, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal quality due to loose connections between system wiring or poor contact of the ABS relay, leading to system malfunction. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As engine speed increases and voltage rises, the ABS indicator turns off. This may also occur if the ABS system power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor electrical connection of the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR control unit. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
8
4
Share

What is the Suitable Tire Pressure?

Tire pressure should be maintained between 2.4 to 2.8 bar. The functions of tires include: 1. Transmitting driving force, braking force, and steering force to enable vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving to prevent damage to automotive components from severe shocks. Methods for maintaining car tires: 1. Regularly check tire pressure; 2. Remove debris from tire treads; 3. Inspect tire wear and replace them promptly when necessary; 4. Perform tire rotation to ensure even force distribution and avoid excessive wear.
7
0
Share

What is the height of the Toyota Prado?

Toyota Prado off-road vehicle height: 1905MM Overall dimensions (length/width/height): 4970/1875/1905mm In terms of appearance, the Toyota Prado 2700 Oman version features a unique new multi-angle reflective combination headlight, perfectly complementing the naturally simple lines of the front grille guardrail. Combined with the wide rear window and rounded taillights, the new Prado 2700 exudes even more imposing presence and charm. The Toyota Prado 2700's under-mounted spare tire is a hallmark of Toyota, while its advanced engine delivers strong output power and torque, making its handling, comfort, and driving performance superior to its peers.
2
2
Share

Can I Pick Up a Car in Another City?

Yes, 1. Domestic cars implement nationwide warranty service. As long as it is a 4S maintenance point designated by the manufacturer, warranty and claim processing can be done, which is not restricted by region. 2. Although purchasing a car in another city can save some costs for the owner, there are certain risks involved. If a temporary license plate is not obtained and insurance is not processed before the return trip, any accidents on the way back will be the sole responsibility of the owner. 3. When purchasing a car in another city, it is best to use POS machine for payment and avoid bank transfers. 4. Before starting the return trip, conduct a final check on the vehicle, all its documents, and the tools to ensure nothing is left behind.
8
5
Share

What is the reason for not being able to engage reverse gear?

The reason for not being able to engage reverse gear is: the clutch pedal is not fully depressed, and the gear teeth happen to align. Here are some relevant information: 1. Inside the structure of a manual transmission, there is a very important device called the "synchronizer." Without the synchronizer, forcibly inserting a slowly rotating gear into a high-speed rotating gear will definitely cause gear grinding. 2. The role of the synchronizer is to increase the speed of the gear to be engaged to match the speed of the output gear when shifting occurs, so that there will be no gear grinding during shifting. This makes it easy to engage the gear.
8
3
Share

What are the Volkswagen brand cars?

Volkswagen brand cars include: Jetta, Passat, Lavida, Lamando, Teramont, Tiguan L, Magotan, Bora, Tayron, Golf, Beetle, Sagitar, Viloran, Caddy, Cross Lavida, Tayron X, Scirocco, Phaeton, Polo, T-Cross, Touareg, etc. Taking the 2020 Comfort Magotan as an example, its front suspension is MacPherson independent suspension, the rear suspension is multi-link independent suspension, equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, matched with a 7-speed dual-clutch transmission.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.