What are the differences between the high-end and low-end versions of the Suzuki UY125?

1 Answers
McTheo
07/29/25 3:29pm
Suzuki UY125 high-end and low-end version differences introduction: 1. Different appearance: The high-end version is obviously more fashionable and beautiful, while the low-end version looks relatively ordinary without many highlights. 2. Different configurations: The differences are mainly in some exterior parts, such as front disc brakes vs. drum brakes, aluminum vs. iron rear racks, and whether it comes with a rear cargo box. The main components and quality are the same. The UY125 exported to Japan has some parts that differ from those sold domestically, using higher-standard and better-quality components. This version is not sold in China; domestically available models only differ in configurations. 3. Different prices: The high-end version of the Suzuki UY125 scooter is significantly more expensive than the low-end version, and correspondingly, the maintenance costs are also higher.
Was this review help?
12
1
Share
More Forum Discussions

What Causes the Engine Light to Keep Flashing?

Here are the reasons why the engine light keeps flashing: 1. Excessive carbon buildup in the throttle or engine. 2. Malfunction of the oxygen sensor leading to an imbalance in the air-fuel mixture ratio. This phenomenon is common when driving at low speeds in urban areas for extended periods. 3. Fuel injector leakage, causing the injector to remain in the fuel supply state even after releasing the accelerator, resulting in an overly rich mixture at low speeds and unstable idle after releasing the throttle. In severe cases, the engine may stall directly. 4. Use of low-quality gasoline with excessive metal content, leading to oxygen sensor poisoning.
2
1
Share

How to Turn Off Mazda's i-stop Auto Start-Stop System?

Mazda i-stop auto start-stop system deactivation method: There is an i-stop button on the vehicle's center console. Press and hold this button until the dashboard indicator turns yellow, indicating the auto start-stop system has been deactivated. For i-stop to function normally, besides the vehicle being stationary and having sufficient battery power, several other conditions must be met. Below are the additional requirements for i-stop operation: 1. Ambient temperature must be between -10°C and 50°C (to prevent excessive air conditioning system load). 2. The vehicle must be on a slope not exceeding 8 degrees or on level ground (automatically sensed by the vehicle) (to prevent rolling backward or forward when releasing the brake). 3. Both engine and transmission must reach operating temperature. 4. The gear must be in D position. 5. The front windshield defroster must be turned off.
18
3
Share

Does the JAC Refine M3 throttle need to be matched?

After cleaning the throttle of the JAC Refine M3, it needs to be rematched. If not reset after cleaning, the throttle opening will remain in the pre-carbon-deposit state, increasing the air intake, which can lead to unstable idling and excessively high engine speed. The method for matching the JAC Refine M3 throttle is as follows: 1. First, turn the key to the power supply position, but do not start the car; it should remain in the off state. 2. After leaving it for about 10 seconds, quickly press the accelerator pedal all the way down, making sure to press it down quickly and completely, and hold it for 15 seconds before quickly releasing it. 3. Finally, turn off the ignition, remove the key, and leave it for about 15 seconds.
9
3
Share

What Causes the Car Key to Get Stuck?

Here are the reasons why a car key might get stuck and the corresponding solutions: 1. The gear shift is not fully returned to the P (Park) position, failing to trigger the electronic sensor: Start the car, shift the gear again, and ensure it is fully returned to the P position, then the key can be removed. 2. Obstructions like coins in the gear slot preventing it from returning: Check the gear slot for any foreign objects and remove them. Additional information: Reasons and solutions for the car key not turning after insertion: Reason: The car's steering wheel automatic lock function activates if the steering wheel is accidentally turned or the wheels are not aligned after parking and turning off the engine, causing the steering wheel to lock. Solution: Gently turn the key with your right hand while lightly turning the steering wheel with your left hand to unlock the steering wheel, allowing the key to turn.
20
3
Share

How is highway mobile speed detection conducted?

Mobile speed detection, also known as moving speed detection, is an alternative method to fixed speed detection. Due to its flexibility, mobile speed detection can be deployed across various road sections. Below is a detailed introduction to highway mobile speed detection: 1. Definition of mobile speed detection: Commonly referred to as mobile speed detection, it includes mobile speed capture and handheld radar speed detection, with the latter being rarely used. The term 'mobile speed detection' typically refers to mobile speed detection devices capable of high-definition speed capture. 2. Types of mobile speed detection: Mobile speed detection devices are further categorized into vehicle-mounted and roof-mounted types. Another common method involves placing the device on a tripod by the roadside for speed detection, which is also a widely used form of mobile speed detection.
11
0
Share

What does 4wd-auto mean?

4wd means four-wheel drive. There are three modes for four-wheel drive: 4wd-eco (two-wheel drive mode), 4wd-auto (automatic four-wheel drive mode), and 4wd-lock (four-wheel drive lock mode). Below is an introduction to 4wd-auto: In 4wd-auto automatic four-wheel drive mode, the four-wheel drive system adjusts the torque distribution between the front and rear axles based on the traction of the front and rear wheels. This mode can be used at both high and low speeds. When driving on unpaved or slippery roads, this mode can be used to improve driving safety and stability. However, compared to two-wheel drive mode, four-wheel drive mode will increase fuel consumption.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.