What are the differences between the Haval H6 upgraded version and the sport version?

How to Determine if Car Tire Pressure is Normal?

Determine based on the tire pressure gauge measurement results. In summer, to prevent car tire blowouts, the general standard pressure is between 2.2-2.4 bar; while in winter, a tire pressure of 2.6-2.8 bar is required. Below are the relevant introductions: 1. Summer tire pressure: Because in summer, the overall temperature is relatively high, car tires are prone to heating up. When the tire pressure is too high, it can easily cause a blowout, so standard tire pressure is sufficient. 2. Winter tire pressure: Winter tire pressure is slightly higher than in summer because car tires undergo thermal expansion and contraction. Since winter temperatures are relatively low, it is generally most appropriate to control it between 2.6-2.8 bar. 3. Other control factors: (1) Load capacity: Whether half-loaded or empty, it is generally necessary to refer to the tire pressure limits indicated on the car's label sticker as a reference value. Fully loaded vehicles should also use the tire pressure limits indicated on the car's label sticker as their reference value. (2) The environment when measuring car tire pressure: the tire pressure is different when the tire is hot and when it is cold, with a general difference of about 0.2-0.3 bar between the two. If you want a more accurate tire pressure value, it is best to wait several hours after the car is turned off before measuring, otherwise, you should subtract about 0.2-0.3 bar. (3) It is worth noting for car owners that the tire pressure for cars frequently running long distances should not be too low and can be appropriately increased by about 0.2 based on the standard pressure.

7

1

Share

What are the maintenance items for the Mercedes-Benz B7?

B maintenance is performed at 20,000 kilometers, requiring the replacement of engine oil, oil filter, and air filter, along with an inspection of the cabin air filter. At 30,000 kilometers, the engine oil and oil filter screen should be replaced. The purpose of car maintenance: To keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Contents of minor maintenance: Minor maintenance generally refers to the routine maintenance items performed at the manufacturer-specified time or mileage to ensure vehicle performance. It mainly includes replacing the engine oil and oil filter. Contents of major maintenance: Major maintenance refers to the routine maintenance performed at the manufacturer-specified time or mileage, which includes replacing the engine oil, oil filter, air filter, and fuel filter.

1

5

Share

How Long Does the Motor Vehicle Subject Three Exam Take?

Subject Three, from getting into the car to the end of the exam, takes about twenty minutes. Here are the relevant details: 1. Subject Three Exam Content: Subject Three tests the comprehensive ability to drive on the road. For example: Before getting into the car, you need to walk around the vehicle to check for obstacles around and under the vehicle. The correct posture when entering the car, driving posture, and operation methods are assessed. You must know to fasten the seatbelt, check the dashboard and three mirrors before starting, ensure the starting air pressure meets the requirements for air-brake vehicles, and listen for any abnormal engine sounds. The methods for starting, changing speed, and stopping must be correct. The principles for overtaking, yielding, meeting, and following other vehicles should be followed. The methods for turning and changing lanes or positions are also tested. 2. Precautions for Subject Three Exam: If the candidate's score falls below the passing mark during the exam, the system will automatically prompt the candidate to pull over. After completing the pull-over action, the system will prompt for the next exam attempt. After completing all required exam items and driving a distance of more than 3 kilometers, the system will automatically prompt to pull over. Upon hearing the pull-over instruction, the candidate should choose a clear curb (or solid road edge line) on the exam route and complete the pull-over action safely. After pulling over, the system will announce the exam results.

1

Share

What are the symptoms of a faulty water pump in a Chery QQ?

The symptoms of a faulty water pump in a Chery QQ include: Unstable idling: A faulty water pump can increase the resistance of the pump's rotation. Since the water pump is connected to the timing belt, increased resistance in the pump's rotation can directly affect the engine's operation. At idle, this manifests as fluctuations in RPM after starting, which is more noticeable in winter and can even cause the engine to stall. Noise from the engine area: This noise is a rotational friction sound, similar to a "grinding" noise. The sound can increase with the engine's RPM and vary in volume. Generally, this noise becomes more pronounced as the fault worsens.

2

1

Share

How Many Chances Are There for the Subject 1 Test?

There is no limit to the number of attempts for Subject 1. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," candidates can take the Subject 1 test twice on the same day. If the first attempt is unsuccessful, a free retake is allowed for the second attempt. If the second attempt also fails, the Subject 1 test is terminated for that day, and the candidate must wait at least 10 days before scheduling another test. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license examination. The test covers driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is computer-based and has a time limit of 45 minutes. To pass the Subject 1 test, a score of 90 out of 100 is required. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point. If a candidate answers 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content includes: driver's license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should dress appropriately (no slippers), and electronic devices and bags are not allowed in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, verify your identity at the assigned station and begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it; unsigned reports are invalid. While there is no limit on Subject 1 attempts, Subject 2 and Subject 3 allow only five attempts each. If a candidate fails five times, any previously passed road driving skill test results will become invalid. The driver's license test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving common sense. The safe driving common sense test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (under the Ministry of Public Security’s Order No. 123) does not include a "Subject 4."

16

1

Share

How to Match the Skoda Steering Angle Sensor?

After starting the vehicle, turn the steering wheel all the way to the left and hold for five seconds, then turn it all the way to the right for five seconds, and finally return it to the center to complete the matching. Function of the Steering Angle Sensor: The steering angle sensor is a device used to detect the rotation angle and direction of the steering wheel. It is an equipment designed to determine the angular position of a shaft, such as the steering column, and includes a coil set, coil holder, and coupler element, which has a coupler angular position related to the angular position of the shaft. Steering Wheel Angle Sensor: It is one of the key components for implementing "ESP" active braking. Not only does it detect the rotation angle of the steering wheel, but it also provides relevant signals to the "ECU" system as the basis for "ESP" control.

11

1

Share

What are the differences between the Haval H6 upgraded version and the sport version?

How to Determine if Car Tire Pressure is Normal?

What are the maintenance items for the Mercedes-Benz B7?

How Long Does the Motor Vehicle Subject Three Exam Take?

What are the symptoms of a faulty water pump in a Chery QQ?

How Many Chances Are There for the Subject 1 Test?

How to Match the Skoda Steering Angle Sensor?

Are electric vehicles subject to traffic restrictions based on license plate numbers?

How Often Should the Engine Oil of a Moped Be Changed?

Where is the Geely Vision Toolbox Located?

How many kilometers can a Mercedes-Benz S600 run on a full tank of fuel?