What are the differences between the Excelle and the Excelle GT?

2 Answers
VonJulianna
07/24/25 1:37am
The differences between the Excelle and the Excelle GT are: 1. Different body dimensions: The Excelle has a body length, width, and height of 4468mm, 1765mm, and 1469mm respectively, with a wheelbase of 2611mm; the Excelle GT has a body length, width, and height of 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. 2. Different powertrains: The Excelle is equipped with a 1.3L naturally aspirated engine; the Excelle GT is equipped with a 1.3L turbocharged engine. 3. Different rear suspensions: The Excelle has a compound torsion beam non-independent rear suspension; the Excelle GT has a multi-link independent rear suspension.
Was this review help?
2
0
Share
SanRuby
08/10/25 9:18pm
As a car owner who frequently chauffeurs family members, I've driven both the Excelle and the Verano, and the differences are quite noticeable. The Excelle is significantly cheaper, priced at just over 100,000 yuan, offering spacious interiors ideal for family trips. However, its cabin has a strong plastic feel, and the ride is noisier. The acceleration is smooth but lacks excitement, and fuel consumption is on the higher side. The Verano costs about 30,000 to 40,000 yuan more, positioned as a more premium model. It boasts a much more stylish exterior, soft-touch interior materials, and comfortable seats. The ride is stable and quiet, equipped with modern features like Bluetooth and navigation, and offers more robust power, making overtaking effortless. From a maintenance perspective, Excelle parts are cheaper and repairs are less costly, whereas the Verano's additional tech features lead to slightly higher maintenance expenses. I believe the choice depends on budget—if funds are tight, the Excelle is a practical option, but for those prioritizing comfort and technology, spending extra on the Verano is worthwhile.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

How to Add Freon to a Car?

Here are the steps for adding Freon refrigerant via the high-pressure side: 1. After the system is vacuumed, close the high and low pressure manual valves on the manifold pressure gauge. 2. Connect one end of the middle hose to the refrigerant canister injection valve. Open the refrigerant canister valve, then loosen the nut at the end of the manifold pressure gauge hose to allow gas to escape for a few minutes, then tighten the nut. 3. Fully open the high-pressure side manual valve and invert the refrigerant canister. 4. Inject the specified amount of liquid refrigerant from the high-pressure side. Close the refrigerant canister injection valve and the high-pressure manual valve on the manifold pressure gauge, then remove the gauge. When adding refrigerant from the high-pressure side, ensure the engine is off (compressor not running) and do not open the low-pressure manual valve on the manifold pressure gauge to prevent hydraulic shock.
10
5
Share

How to Correct Vehicle Pulling to One Side?

Methods to correct vehicle pulling to one side: 1. Excessive difference in front tire pressure: If the tire pressure of the two front wheels differs significantly, the vehicle will pull towards the side with lower tire pressure during driving. Check and maintain consistent tire pressure. 2. Pulling to one side during high-speed braking: This phenomenon is unrelated to the steering system and is caused by the brake caliper not retracting. Inspect and repair the brake caliper. 3. Inaccurate four-wheel alignment: Four-wheel alignment alone may not resolve the issue. It requires professional technicians and specialized equipment for precise adjustment, both of which are essential. 4. Uneven tire wear: If the tread wear varies significantly or if the four tires have different brands or tread patterns, it can cause pulling. 5. Suspension system malfunction: If the vehicle has been in a collision, altering the suspension data, even performing a four-wheel alignment won't help. Inspect the deformation of the control arms and steering knuckles.
12
1
Share

How to Clean Throttle Body Carbon Deposits?

Methods for cleaning throttle body carbon deposits: 1. Remove the intake hose to expose the throttle body; 2. Disconnect the negative terminal of the battery and turn off the ignition switch; 3. Straighten the throttle plate and spray a small amount of carburetor cleaner into the throttle body; 4. Use a polyester cloth or non-woven fabric to wipe clean. For hard-to-reach areas inside the throttle body, use a clip to hold the cloth for cleaning. After cleaning, the throttle body needs to be initialized. Previously, due to sludge blockage, the ECU would automatically adjust the throttle opening to ensure proper air intake. After cleaning, with no more sludge blockage, if the throttle maintains its previous opening, it will result in excessive air intake, causing engine shaking during startup and weak acceleration. The throttle body is a controllable valve that regulates air entering the engine. The air mixes with gasoline in the intake manifold to form a combustible mixture for combustion and power generation. The throttle body connects to the air filter at the top and the engine block at the bottom, often referred to as the throat of the car engine.
11
5
Share

What are the effects of widening car tires?

Widening car tires has the following effects: 1. First, it affects the vehicle's power. Due to the increased friction, more energy is required to drive the tire's rotation, which directly translates to a decrease in power under the same powertrain. 2. Secondly, it leads to an increase in fuel consumption. The greater friction brings more resistance, necessitating the use of more fuel to drive the rotation, resulting in a noticeable rise in fuel consumption. 3. Widening the rear tires also reduces driving comfort. Tires with a smaller aspect ratio have thinner sidewalls, which decreases their cushioning ability. As a result, more road vibrations are transmitted to the vehicle body, leading to a reduction in comfort.
17
2
Share

What are the dimensions of the Boyue?

The dimensions of the Boyue are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm. In terms of exterior design, the Boyue features Geely's signature 'water ripple' front grille, which has been simplified with fewer grids to emphasize the SUV's robust appearance, resulting in a cleaner and more angular look. The sharp LED headlights with an eagle-eye design, combined with a black and bright silver lamp bowl, create a strong three-dimensional effect. Under the hood, the Boyue offers a variety of powertrain options, including a 1.8TD engine and a 2.0L naturally aspirated engine, paired with either a 6-speed manual transmission or an Australian DSI 6-speed automatic transmission, providing multiple powertrain combinations. The vehicle is equipped with the upgraded Bosch 9.1 Electronic Stability Program (ESP), which has been optimized by Geely engineers for Chinese road conditions and SUV characteristics, ensuring both safety and driving pleasure.
9
5
Share

What is the test drive fuel consumption of the Jetta VS5?

The test drive fuel consumption of the Jetta VS5 is 8 liters per 100 kilometers. There are many factors that affect a car's fuel consumption, such as road conditions, vehicle condition, season, and driving skills. The first three factors are uncontrollable, and the only controllable factor is driving skills. Below is some related information about the Jetta VS5: 1. The Jetta VS5 is a 5-door, 5-seater compact SUV with a length, width, and height of 4419mm, 1841mm, and 1616mm respectively, a wheelbase of 2630mm, and a fuel tank capacity of 51 liters. 2. The Jetta VS5 is equipped with a 1.4T turbocharged engine and a 5-speed manual transmission, with a maximum power of 110 kilowatts and a maximum torque of 250 Newton-meters. Its drivetrain is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.