What are the differences between the e200 and e260?

1 Answers
DiXavier
07/29/25 9:18am
The main differences between the e200 and e260 are as follows: 1. Power. In terms of power and displacement, both the Mercedes-Benz E200 and E260 use a 2.0-liter inline 4-cylinder turbocharged engine. The data shows that the two engines are completely identical. The 0-100 km/h acceleration time of the two models differs by only 0.1 second, and both can reach a top speed of over 240 km/h. 2. Exterior. First, the rear badges are the most obvious difference, with one being E200 and the other E260. Secondly, the wheel rims are also different, and the tires are 245/40R19 for one and 245/45R18 for the other.
Was this review help?
6
5
Share
More Forum Discussions

What does it mean to drive without following the examiner's instructions?

Driving without following the examiner's instructions means not obeying the examiner's commands. Below are the exam precautions: 1. Before getting into the vehicle: Check if all four doors of the exam vehicle are closed. If any door is not closed, the exam result will be marked as failed. 2. After getting into the vehicle: Observe the vehicle's dashboard to see if the vehicle is turned off or idling. If the tachometer shows zero, start the vehicle, but ensure the gear is in neutral before starting. 3. Adjust the seat and mirrors, and fasten the seatbelt: Test if the handbrake can be released. If not, promptly contact the exam site staff. After completing these preparations, raise your hand to signal. The remote examiner will then send the instruction "Please scan your fingerprint." Use the same finger that was registered in the waiting room for verification. Upon successful verification, a voice prompt will say, "Verifying examinee information, please begin the exam." Only after hearing this instruction should you start driving into the exam items. Driving into the exam items without hearing the "please begin the exam" instruction will be automatically judged as failing to follow the examiner's instructions, resulting in disqualification.
16
2
Share

Why is the validity period of the 6-year exemption from inspection only 2 years?

The reason why the 6-year exemption from inspection has a validity period of only 2 years is due to the unified management of small vehicles. The following is relevant information about the annual inspection: 1. Conditions: Vehicles whose condition does not match the records on the driving license or file, vehicles with damaged, incomplete, or illegible license plates or driving licenses, or those with self-made license plates. 2. Precautions: The exterior of the vehicle must not be modified. The color of the glass sunshade or anti-explosion film should not be too dark (items inside the vehicle should be clearly visible from one meter away; mainly applies to vans and trucks, but not to small cars with 5 seats or fewer). Vans and trucks must have enlarged rear license plate numbers. The number of spring leaf plates must not be increased or decreased. The number of seats in a van must not be increased or decreased, and a fire extinguisher must be present. The compartments of box trucks must not be modified (no side doors, no roof openings, no tailgates). The size of the tires must not be altered, and the tread patterns of tires on the same axle must be consistent. Vehicles with unresolved traffic violations or those impounded by the court cannot undergo the annual inspection.
10
0
Share

How to Deal with Insufficient Power After Turning on the Air Conditioning?

Here are the solutions to insufficient power after turning on the air conditioning: 1. It is normal for a car to experience insufficient power after turning on the air conditioning, and this phenomenon becomes more noticeable as the car ages. Since the car's air conditioning is driven by the engine, the power of the air conditioning compressor comes from the car's engine. Therefore, some power is also consumed during the operation of the air conditioning, making the car feel sluggish and underpowered when accelerating. 2. Car malfunctions can lead to a decline in vehicle power performance. Especially in the hot summer, these faults are often hidden behind the air conditioning and go unnoticed. For example, faults in the thermostat or clutch mostly occur under high-temperature conditions, making them easily misjudged by drivers. In reality, it is not difficult to determine whether the power loss is caused by the air conditioning or other faults. Simply turn off the car's air conditioning when you feel the car struggling. If the power situation improves significantly, then the issue is with the air conditioning. If the car still feels weak even after turning off the air conditioning, a more thorough inspection at a repair shop is necessary. 3. Upgrade the spark plugs: High-performance spark plugs can withstand greater thermal and mechanical loads and can adapt to higher ignition voltages, ensuring sufficient ignition energy. For example, spark plugs with iridium alloy electrodes can endure extremely high temperatures without melting and have strong electrode wear resistance, resulting in a longer lifespan. Strong ignition energy can improve the fuel combustion efficiency of the engine, effectively enhancing engine power output without increasing fuel consumption.
18
0
Share

How often does the BYD Han DM need to be charged?

BYD Han DM needs to be charged every 2 days. Here is some additional information about the BYD Han DM: 1. Body dimensions: The BYD Han is a B-segment car with body dimensions of 4980 (4960)/1910/1495mm and a wheelbase of 2920mm. 2. Design inspiration: The design was inspired by the Chinese dragon, symbolizing not only speed and power but also leadership. 3. Charging time: Using a standard 220V household power supply, a full charge takes about 9 hours and consumes approximately 15 kWh. At a professional charging station, it takes 15 to 30 minutes.
17
1
Share

What are the effects of revving the engine in neutral?

Revving the engine in neutral can cause significant damage to the vehicle. When the car is in neutral, the engine operates without any load. Suddenly pressing the accelerator in this state subjects certain engine components to substantial inertial forces, which can shorten the engine's lifespan. Precautions for using a car engine are as follows: 1. Avoid driving in neutral: The engine inherently has a fuel-cut function during deceleration. Being in neutral is actually counterproductive for fuel efficiency. 2. Pay attention to observations while using the vehicle: If you notice oil on the ground, determine whether it indicates an engine oil leak. Communicate promptly with the car's 4S store to eliminate potential safety hazards. 3. Do not turn off the engine immediately: For vehicles equipped with turbochargers, avoid turning off the engine immediately after high-speed driving or climbing a slope. Let the engine idle for 10 minutes before shutting it down. Turbocharged vehicles accumulate carbon deposits several times faster than naturally aspirated engines. 4. Replace or filter the brake fluid: If the brake fluid is contaminated with water or contains impurities or sediment, it should be replaced or carefully filtered immediately. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.
6
5
Share

Is It Legal to Install a Roof Rack on a Car?

Installing a roof rack on a car requires applying for approval and modification procedures at the relevant vehicle management office within 10 days after the modification. Otherwise, it will be considered illegal modification. Below are the relevant regulations for modification: 1. Article 54 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that the load carried by a motor vehicle shall not exceed the approved load capacity specified in the vehicle's license, and the length and width of the load shall not exceed the dimensions of the vehicle body. 2. For heavy and medium-duty trucks and semi-trailers, the height of the load from the ground shall not exceed 4 meters, and for vehicles carrying containers, the height shall not exceed 4.2 meters. 3. For other motor vehicles carrying loads, the height from the ground shall not exceed 2.5 meters. 4. For motorcycles, the height of the load from the ground shall not exceed 1.5 meters, and the length shall not exceed the body by 0.2 meters. For two-wheeled motorcycles, the width of the load on each side shall not exceed the handlebars by 0.15 meters. 5. For three-wheeled motorcycles, the width of the load shall not exceed the body. Passenger cars are not allowed to carry goods except for the external roof rack and built-in luggage compartment. The height of the load on the roof rack of a passenger car shall not exceed 0.5 meters from the roof or 4 meters from the ground.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.