What are the differences between the Crown 2.5 and 3.0?

What is the Kuangshi car?

Kuangshi is a mid-to-large-sized SUV launched by Hanlong Automobile Company. Taking the 2020 Kuangshi as an example, its body dimensions are: length 4985mm, width 1995mm, height 1819mm, wheelbase 2997mm, minimum ground clearance 215mm, and fuel tank capacity 74 liters. The 2020 Kuangshi is equipped with a 2.0T turbocharged engine, with a maximum power of 160kW and a maximum torque of 370Nm, paired with an 8-speed automatic manual transmission. It adopts a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension.

1

5

Share

What is the motor power of the Kia K5 New Energy?

The motor power of the Kia K5 New Energy is 50kW, with a total motor torque of 205Nm. Taking the 2019 Kia K5 as an example, its body dimensions are: length 4855mm, width 1835mm, height 1475mm, wheelbase 2805mm, and minimum ground clearance 145mm. The 2019 Kia K5 is equipped with a 2.0L naturally aspirated engine, with a maximum power of 115kW and a maximum torque of 189Nm, paired with a 6-speed automatic transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.

4

2

Share

Where can a car make a U-turn?

A car can make a U-turn in the following places: 1. When there is no dedicated U-turn signal light or other traffic signs regulating U-turns, vehicles can make a U-turn during traffic light signals. 2. If there are traffic signs clearly indicating U-turns during red or green lights, the U-turn should be made during the specified signal period. Additional information: 1. Vehicles must not make U-turns at locations with signs prohibiting U-turns or left turns, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other dangerous sections of the road. 2. Whether U-turns are allowed or not, vehicles making a U-turn must yield to vehicles proceeding normally. If a traffic accident occurs due to the U-turning vehicle failing to yield, the U-turning vehicle will bear full responsibility.

4

2

Share

Can Semi-Synthetic and Full Synthetic Engine Oils Be Mixed?

Semi-synthetic and full synthetic engine oils should not be mixed. The reason is that full synthetic oil contains no mineral oil, while semi-synthetic oil contains a small amount of mineral oil. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives compensate for and improve the deficiencies in the performance of the base oil. The differences between synthetic and semi-synthetic oils include: 1. Different base oils: Synthetic oil is a mixture of Group III, IV, and V base oils, while semi-synthetic oil uses Group III base oil. 2. Different replacement intervals: Synthetic oil has a service life of one year or 10,000 kilometers, whereas semi-synthetic oil should be replaced every six months or 7,500 kilometers.

20

0

Share

How Often Should Car Air Conditioning Be Recharged with Freon?

There is no fixed interval for recharging car air conditioning with Freon. When the cooling effect of the car air conditioning deteriorates, you can check if the Freon level is low and proceed with replacement or replenishment. The method of using car air conditioning is as follows: 1. After starting the vehicle, turn the air conditioning knob to the cooling or heating zone; 2. Press the AC button when cooling is needed. The functions of car air conditioning are: 1. To provide a comfortable riding environment for passengers and reduce travel fatigue; 2. To create favorable working conditions for the driver and ensure safe driving. Car air conditioning, also known as the car air regulation device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to an optimal state. Its components include the refrigeration system, heating system, air purification device, and control system.

6

3

Share

How to Test an Automotive Ignition Coil?

Testing methods for ignition coils include: 1. When testing an ignition coil, the primary method involves using a multimeter to measure the resistance values of the primary and secondary windings. 2. The performance of an ignition coil can be tested on a universal test bench, mainly by measuring the spark gap to determine its performance. Additional information: 1. An ignition coil is a transformer that generates the high voltage required for ignition, converting 12V low voltage into 15–20kV high voltage. 2. However, the working principle of an ignition coil differs from that of a regular transformer. While a regular transformer operates continuously, an ignition coil works intermittently, storing and releasing energy at varying frequencies depending on the engine's speed.

7

3

Share

What are the differences between the Crown 2.5 and 3.0?

What is the Kuangshi car?

What is the motor power of the Kia K5 New Energy?

Where can a car make a U-turn?

Can Semi-Synthetic and Full Synthetic Engine Oils Be Mixed?

How Often Should Car Air Conditioning Be Recharged with Freon?

How to Test an Automotive Ignition Coil?

Where is the Appropriate Position for Car Rearview Mirrors?

Can You Learn to Drive with One Hand?

What car has an H-shaped logo?

How to reset the Peugeot service light?