What are the differences between the Citroën C5 and the Superb?

Which domestic car has the most airbags?

Domestic cars can be equipped with up to 8 airbags, such as the Changan Oushang A800. Airbag structure: Mainly composed of airbag sensors, anti-collision airbags, and electronic control devices. The driver-side anti-collision airbag is installed in the steering wheel; airbag sensors are installed on the left, right, and middle sections of the cabin partition; the middle airbag sensor and airbag system are installed together with the electronic control device. The airbag assembly mainly consists of the airbag, gas generator, and igniter. Airbag working principle: When a collision occurs while the car is in motion, the airbag sensors receive the impact signal, which is then processed by the electronic controller. The controller compares this signal with its stored reference signals. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag assembly. Upon receiving the signal, the gas generator ignites the gas-producing agent, generating a large volume of gas. This gas is filtered and cooled before entering the airbag, causing it to rapidly inflate and break through the padding within an extremely short time.

6

1

Share

Can the original license plate be used after the car is transferred?

Can the original license plate be used after the car is transferred? Duration of vehicle transfer: It can be completed within one to two working days. Vehicle transfer refers to the change of ownership procedures for motor vehicles. After the transfer, you need to reselect the vehicle license plate, reissue the motor vehicle license, record the relevant information in the motor vehicle registration certificate, and also transfer the compulsory traffic insurance and commercial insurance of the vehicle. Vehicle transfer procedures: Vehicle license; motor vehicle registration certificate; motor vehicle registration supplementary form (obtained from the local vehicle management office of the vehicle's jurisdiction, with ID card, driving license, and road maintenance fee certificate); vehicle purchase tax certificate; ID cards and household registration books of both the buyer and seller. For non-local residents, a temporary residence permit is required, and the buyer's temporary residence permit must be valid for at least one year.

19

0

Share

What does the D gear mean?

The D gear stands for Drive, which is the gear used when driving forward. Introduction to D gear: The transmission will automatically shift between 1st gear and overdrive (equivalent to 1st to 4th gears) based on speed and throttle conditions. This gear is used for normal road driving. Due to different designs in various countries' vehicle models, the "D" gear generally includes gears from 1st to high gear or 2nd to high gear, and it will automatically shift based on changes in speed and load. Additional information about D gear: Since automatic transmissions determine the gear based on throttle position and vehicle speed, the shifting speed varies depending on how the accelerator pedal is operated. If the accelerator pedal is pressed down quickly when starting, the upshift will occur later, providing stronger acceleration. Once a certain speed is reached, quickly releasing the accelerator pedal will cause the car to upshift immediately, resulting in reduced engine noise and improved comfort.

2

4

Share

Where is the ambient temperature sensor located on Dayun heavy-duty trucks?

The ambient temperature sensor is located in front of the radiator or in front of the vehicle's bumper. Function of the ambient temperature sensor: The ambient temperature sensor is a device used to detect the ambient temperature around the vehicle. The control system compares the outside temperature with the interior temperature and then determines the control method. The ambient temperature sensor provides the ECU with the outside temperature signal, and the ECU uses this signal to regulate the interior temperature to meet the comfort needs of the occupants. Types of ambient temperature sensors: There are various types of ambient temperature sensors. Based on the measurement method, they can be divided into contact and non-contact types. According to the sensor material and electronic component characteristics, they are classified into thermistors and thermocouples. The ambient temperature sensor is a crucial component for controlling the interior temperature. Regular vehicle maintenance should be performed, and the condition of automotive components should be periodically inspected during normal vehicle use.

19

1

Share

Can Mr. Muscle Glass Cleaner Be Used as Automotive Glass Washer Fluid?

Cleaning the car windshield requires the use of automotive-specific glass washer fluid, and Mr. Muscle glass cleaner cannot be used as a substitute. Reasons why cleaner cannot be used: The cleaner can form scale deposits in the water reservoir and rubber pipes, affecting normal spray function. Additionally, when the cleaner is sprayed onto the windshield, exposure to wind and sunlight can also lead to scale formation. Prolonged use may increase friction between the glass surface and wiper blades, potentially causing irreparable scratches on the glass. Composition of glass washer fluid: Professional automotive glass washer fluid consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It offers functions such as dirt removal, antifreeze, anti-static properties, and corrosion prevention.

1

Share

What Causes the Engine to Overheat When Accelerating?

Engine overheating when accelerating is usually caused by air trapped in the radiator, which can be resolved by bleeding the air. Here are the methods to remove air from the radiator: Check the coolant: Open the engine compartment when the engine is cold and check if the coolant level is sufficient. The coolant reservoir has MAX and MIN level marks. If the level is below the MIN mark when the engine is cold, add coolant according to the marked levels on the reservoir. Idle circulation: Drain the old antifreeze and flush the fluid channels with clean water. Let clean water continuously flow through the engine cooling system, then start the engine and let it idle for 3 to 5 minutes to circulate the water. Continue adding clean water until the water flowing out is clear.

17

1

Share

What are the differences between the Citroën C5 and the Superb?

Which domestic car has the most airbags?

Can the original license plate be used after the car is transferred?

What does the D gear mean?

Where is the ambient temperature sensor located on Dayun heavy-duty trucks?

Can Mr. Muscle Glass Cleaner Be Used as Automotive Glass Washer Fluid?

What Causes the Engine to Overheat When Accelerating?

What Causes the Exhaust Valve to Hit the Piston?

How many kilometers can a domestic SUV run?

Will a Manual Transmission Car Stall When the Clutch is Pressed?

Can Transmission Fluid Replace Brake Fluid?