What are the differences between the C1 and C2 driving license tests?

1 Answers
LeilaniFitz
07/30/25 1:29am
The difference between the C1 and C2 driving license tests lies in the gear-shifting section of the 100-meter test. C1 candidates are required to take this section, while C2 candidates are exempt. C1 Driving License: The C1 driving license is one of the classifications for motor vehicle driving licenses. It permits the holder to drive small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Age Requirements: The minimum age to apply for a C1 license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests assessing memory, judgment, and reaction abilities. Medical Examination Requirements: Drivers aged 70 or older (including 70) must undergo an annual physical examination, while those under 70 are not required to do so.
Was this review help?
12
0
Share
More Forum Discussions

Why is the lawn mower burning engine oil?

Lawn mower burning engine oil mainly due to the following reasons: Poor oil quality: Low-grade engine oil can lead to increased wear. Additionally, if the oil viscosity is either too low or too high, it will result in poor engine lubrication, accelerating wear on piston rings and cylinder walls, reducing sealing performance, and causing oil burning. Excessive clearance: If the fit clearance between the piston rings and cylinder walls is too large, the piston rings are improperly installed, or the sealing performance deteriorates, engine oil on the cylinder walls can enter the combustion chamber, leading to oil burning. In such cases, immediate repair is necessary to avoid economic losses or hazardous situations.
3
3
Share

How to Replace the Sunshade Fabric of Buick Excelle's Sunroof?

Remove the dustproof panel (made of plastic and rubber composite) on the side of the sunroof. Be careful not to use excessive force; try pulling gently from both top and bottom. Use a T25 Torx wrench to unscrew the bolts securing the sunroof glass (4 bolts in total on both sides). This will allow the sunroof glass to be removed. Use a flat-head screwdriver to press the slider toward the vehicle's vertical centerline, causing the slider to detach from the track.
7
5
Share

How to Adjust When Reversing into the Garage is More or Less Than 30cm?

Turn the steering wheel fully to the right and reverse without stopping, while observing the right rearview mirror. When the rightmost line is visible, maintain a distance of 30cm between the car body and the garage corner. Simultaneously observe the left rearview mirror. When the leftmost line is visible, maintain a distance of 30cm between the car body and the garage corner. If it's less than 30cm, turn the steering wheel back half a turn to adjust.
18
5
Share

Is It Illegal to Install Additional Fog Lights?

Adding fog lights to a car can enhance driving safety, but from a legal perspective, unauthorized installation of fog lights constitutes illegal modification. Here are the relevant details: Potential Issues: Currently, installing additional fog lights falls into a legal gray area. According to regulations, it is prohibited to install lighting and signaling devices beyond the mandatory standards, which means there is a possibility of being penalized. Modification Requirements: Modifications must not alter the vehicle's distinctive features, power system, or safety structure. Specifically, changes to the body color, logos, design, engine, or suspension are not allowed.
18
5
Share

How many years is the warranty for the Focus transmission module?

The warranty period for the Focus transmission control module is 10 years or 240,000 kilometers (whichever comes first). The specific warranty period can be checked in the warranty manual or by consulting the manufacturer's customer service. Below is some information about the transmission: 1. Introduction: The transmission, also known as the gearbox, is used to change the speed and torque from the engine and can fix or change the gear ratio between the output shaft and the input shaft. 2. Functions: It can be divided into stepped, continuously variable, and integrated transmissions, with functions such as enabling reverse driving, interrupting power transmission, and changing the gear ratio.
6
0
Share

How to reset the maintenance light on a Hanteng V7?

First, the driver needs to press the start button to ignite the vehicle. After starting the vehicle, the engine oil maintenance reminder will appear on the dashboard. Press the SET button on the left side of the steering wheel, then press the SEL button on the right side of the steering wheel. After pressing the SET and SEL buttons, finally press the cancel button on the left side of the steering wheel. After pressing the cancel button, you can observe the maintenance light on the dashboard resetting to zero.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.