What are the differences between the Buick LaCrosse Avenir and the regular LaCrosse?

1 Answers
DiPenelope
07/30/25 3:28am
The differences between the LaCrosse Avenir and the regular LaCrosse are as follows: 1. Vehicle dimensions: The LaCrosse Avenir model is 5.03 meters in length and 1.467 meters in height, with a trunk capacity of 472 liters. The regular LaCrosse model is 5.026 meters in length and 1.462 meters in height, with a trunk capacity of 523 liters. The Avenir model uses 245/45R19 tires, while the regular LaCrosse uses 235/50R18 tires. 2. Model features: The highlights of the LaCrosse Avenir model mainly lie in its seat configurations. All seats are made of genuine leather, with the second-row seats supporting backrest angle adjustment via electric controls. The rear seats also feature heating, ventilation, and massage functions, along with a multimedia controller, independent rear sunshades, and a separate rear air conditioning system. Both vehicles share the same engine and transmission, but the Avenir version offers higher configurations, providing better usability.
Was this review help?
20
4
Share
More Forum Discussions

What to Do When Headlights Get Foggy Due to Water Ingress?

It is quite common for car headlights to get foggy due to water ingress, and car owners need not worry too much. Here is some relevant information: 1. From the moment the headlights are turned on until they are in use, a significant amount of heat is generated. There is usually a ventilation rubber tube located at the rear cover of the headlight, which serves to expel the heat produced after the headlight is turned on. However, moisture in the air can enter the headlight through this tube and condense on the lens. As the moisture accumulates, it forms water droplets that eventually flow down the lens. This phenomenon typically occurs during significant temperature differences, such as in winter or during rainy seasons. 2. The best way to deal with foggy headlights is to turn them on. Normally, after the headlights have been on for a while, the fog will dissipate along with the heat through the ventilation tube, without causing any damage to the headlights or the electrical circuits. If the car owner has a high-pressure air gun or a hair dryer, setting it to the cold air mode and blowing air over areas in the engine compartment that are prone to moisture accumulation can help speed up air circulation and remove the moisture.
7
5
Share

How many days in advance should I book Subject 3?

Subject 3 generally needs to be booked five days in advance. The system will automatically review the application five days before the exam date. Candidates who pass the review will receive a confirmation message, notifying them of the scheduled exam date, venue, and session. To cancel the exam, you must apply at least one working day in advance. Typically, the booking result will be announced two days before the scheduled date, and you will receive a confirmation message. However, if the two days prior fall on a weekend, the result will be announced four days in advance. Below is relevant information: 1. Subject 3, also known as the Road Safety Driving Test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the Road Driving Skills and Safe & Civilized Driving Knowledge Test in the motor vehicle driver's exam. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. The content of Subject 3 generally includes: pre-driving preparations, light simulation test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving.
20
3
Share

What are the causes of car air conditioning system failures?

The following is a related introduction to the causes of car air conditioning system failures: 1. No refrigerant: When there is a refrigerant leak in the system and it goes unnoticed for a long time, this result occurs. To address this situation, first identify the leak point, repair it, then re-evacuate and recharge the refrigerant. 2. Refrigeration system failure: Internal pipe blockage is the most common fault in the refrigeration system. When the compressor is working, if a certain part of the refrigeration system is severely blocked and there is no refrigerant circulating, the cooling effect is lost. At this time, if a pressure gauge is used to detect the pressure values on the high and low pressure sides of the refrigeration system, it can be found that the pressure value on the high pressure side is lower than normal, while the pressure value on the low pressure side is in a vacuum state, and there is a significant temperature difference before and after the blockage. This fault usually occurs in the receiver-drier or expansion valve. Therefore, nitrogen can be used to blow into the inlet or outlet of the receiver-drier or expansion valve. If it is not smooth, it indicates a blockage and needs to be replaced.
11
3
Share

Does Parking on a Slope Overnight Damage the Car?

Parking on an uneven slope for a short period of time will not have any significant impact on the car, so leaving the car on an uneven surface overnight is generally fine. However, if the car is parked on an uneven surface or slope for an extended period, it can cause damage. This is because parking in such a manner results in uneven weight distribution, with one side of the car bearing more weight than the other. Over time, this imbalance can alter the car's body structure and affect its normal operation. The long-term effects of parking on a slope include: 1. **Car Frame Deformation**: The car's doors and hood are numerous, and the body's manufacturing tolerances are strict. Parking on a slope causes the entire body to tilt, leading to uneven stress distribution and potential deformation. Prolonged exposure to such conditions can result in irreversible frame deformation, which may even affect the normal opening and closing of doors. 2. **Impact on Tires**: Tires bear the entire weight of the car. Parking on a slope causes uneven tire wear or deformation due to uneven weight distribution. Over time, this accelerates tire damage. 3. **Impact on the Suspension System**: The car's suspension system includes shock absorbers, springs, and anti-roll bars. When parked on a slope, the shock absorbers are not engaged, but the springs and anti-roll bars remain under tension. Long-term parking on a slope can lead to uneven fatigue in the springs on either side, reducing their performance and lifespan.
7
4
Share

Can 98 and 95 Octane Gasoline Be Mixed?

No, they cannot be mixed. Mixing gasoline can easily damage the car's engine. Additionally, when choosing the gasoline octane rating, do not select one lower than the manufacturer's specified rating, as this may cause issues such as insufficient power and poor acceleration in the vehicle. Below is relevant information: 1. Gasoline with different octane ratings has different levels of octane. The higher the octane rating, the higher the octane value, and gasoline with a higher octane value has better anti-knock properties. 2. Since the nationwide implementation of the China V emission standards, the fuel octane ratings have been redefined. The original 93 and 97 octane gasoline have been replaced with 92 and 95 octane gasoline, and 98 octane gasoline has been added. 95 octane gasoline indicates that it contains 95% octane, while 98 octane gasoline contains 98%. The octane rating of fuel to be used in a car is determined by the compression ratio of the car's engine cylinders. 3. Cars with a compression ratio between 8.5 and 9.5 generally use 92 or 95 octane gasoline; cars with a compression ratio greater than 9.5 should use 98 octane gasoline.
11
1
Share

What Causes the Inability to Accelerate When Going Uphill?

Here are the reasons why a car cannot accelerate when going uphill: 1. Poor fuel quality. When there are too many impurities or excessive water in the fuel, it can lead to insufficient power. Moreover, low-quality fuel can easily clog components with small holes or filtration functions, such as the fuel pump filter, gasoline filter, and fuel injectors, resulting in poor fuel supply and reduced engine performance. 2. Severe carbon buildup. Excessive carbon deposits in the throttle valve and intake pipes can restrict airflow, preventing gasoline from burning completely, which naturally leads to insufficient power and, to some extent, increased fuel consumption. Clogged fuel injectors can result in poor fuel atomization or even a complete failure to inject fuel, causing a misfire and reducing the engine's output power. 3. Damaged ignition coil. A damaged ignition coil can prevent a cylinder from igniting and functioning properly, leading to a misfire and insufficient power, accompanied by engine shaking. If the ignition coil is damaged, it should be replaced promptly. 4. Dirty gasoline filter. A gasoline filter that hasn't been replaced for a long time can fail to filter the gasoline properly. In severe cases, the filter may become clogged, commonly resulting in the car stalling easily and frequently failing to start.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.