What are the differences between the Boyue Pro and the Boyue?

Is a residence permit required to obtain a driver's license in Urumqi?

In Urumqi, a residence permit is not required to obtain a driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," applicants for a motor vehicle driving license must submit their applications to the vehicle management office as follows: 1. If residing in the household registration location, the application should be submitted there. 2. If residing outside the household registration location, the application can be submitted at the place of residence. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," first-time applicants for a motor vehicle driving license must fill out an application form and submit the following documents: 1. The applicant's identity proof. 2. A medical certificate issued by a medical institution regarding physical condition.

9

5

Share

How to Remove Grease from Car Glass?

Here are the methods to remove grease from car glass: 1. First, spray an appropriate amount of water on the car glass. 2. Then, spray an appropriate amount of grease remover. 3. Next, use a sponge to carefully wipe the car glass. 4. After that, rinse the car glass with clean water. 5. Once dried, the grease on the car glass will be removed. Below is an introduction to car maintenance: 1. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, and prevent faults. 2. Daily car maintenance is very important, which can be summarized as cleaning, tightening, checking, and replenishing.

1

5

Share

Is the BMW 325li Front-Wheel Drive or Rear-Wheel Drive?

BMW 325li is a rear-wheel drive vehicle. Definition of Front-Wheel Drive: Front-wheel drive refers to vehicles where the engine's power is directly transmitted to the front wheels, propelling the vehicle forward. In simple terms, the front wheels "pull" the rear wheels to move the vehicle. Definition of Rear-Wheel Drive: Rear-wheel drive refers to vehicles where the engine's power is transmitted to the rear wheels via a driveshaft, pushing the vehicle forward. In this case, the rear wheels "push" the front wheels to move the vehicle.

5

2

Share

What is the Nürburgring lap time of the BMW X3M?

The Nürburgring lap time of the BMW X3M is 7:23.16, ranking 36th among all vehicle models. Exterior of the X3M: The BMW X3M features M Power-specific front and rear bumpers, grille, and front fenders based on the X3's design. The all-black grille bears an "M" badge, and the front bumper adopts a three-section design with a large central air intake and M design elements. The rear end is equipped with dual twin-exhaust pipes paired with a black rear diffuser and a small spoiler. The base model comes with 20-inch 764M-style double-spoke alloy wheels, while the Competition version features 21-inch 765M-style V-spoke alloy wheels. The lightweight large-diameter wheels are nearly flush with the fenders. Performance of the X3M: Under the hood, the BMW X3M is powered by a 3.0T S58 inline-six twin-turbocharged engine. The standard model delivers a maximum power output of 353kW and a peak torque of 600Nm. The Competition version boosts power to 375kW (510hp) while maintaining the same 600Nm torque. Both variants are paired with an 8-speed M Steptronic transmission. The standard model accelerates from 0-100km/h in 4.3 seconds, while the Competition version achieves it in just 4.2 seconds.

9

3

Share

Must Transmission Fluid Be Replaced According to the Model?

When it comes to car maintenance, whether it's major or minor servicing, attention is often paid to the renewal and replacement of engine oil and the three filters. However, many car owners tend to overlook transmission maintenance. In fact, transmission fluid also needs to be replaced regularly, except for certain brands that specifically claim to be maintenance-free for life. Long-term neglect of replacement may lead to issues such as gear shifting impact, occasional failure to move, and in severe cases, the generation of debris that can block oil passages and damage the valve body. Compared to engine oil changes, replacing transmission fluid is more complex because the transmission contains numerous fine oil pipes for various hydraulic valves, and the transmission has high requirements for oil quality. It's not necessarily better to choose higher-end products; usually, original or equivalent-grade fluids are sufficient. Overall, similar to how engine oil protects the engine, transmission fluid serves to protect, lubricate, cool, and remove impurities from your car's transmission. Unlike engine oil, which is typically replaced every 5,000 or 10,000 kilometers, transmission fluid must be replaced according to the specific transmission model! Currently, there are three mainstream methods for replacing automatic transmission fluid. The first method is similar to changing engine oil, where the transmission's drain plug is loosened to drain and refill the fluid. The second method involves directly removing the oil pan for draining and refilling. The third method, which is more advanced, uses a circulation machine to replace the automatic transmission fluid. The first two methods are widely used today because they are cost-effective (requiring less fluid) and do not require repair shops to purchase additional equipment. However, they have drawbacks: traditional gravity drainage cannot "completely" replace the transmission fluid, leaving old fluid residues in the valve body, cooling lines, and various components, which can contaminate the new fluid when added directly.

15

4

Share

How to Determine the Number of Pistons in a Brake Caliper?

Brake caliper piston count can be determined visually: The number of circular protrusions on the caliper indicates the pistons. Since caliper pistons are symmetrically arranged on both sides to evenly distribute braking force while increasing it, you only need to count the protrusions on one side and then double that number for the total piston count. Below is more information about brake calipers: 1. A brake caliper is the component that clamps the brake pads when the brake pedal is pressed, creating the braking effect. 2. Generally, more pistons in a car's caliper result in greater, more stable, and smoother braking force.

20

5

Share

What are the differences between the Boyue Pro and the Boyue?

Is a residence permit required to obtain a driver's license in Urumqi?

How to Remove Grease from Car Glass?

Is the BMW 325li Front-Wheel Drive or Rear-Wheel Drive?

What is the Nürburgring lap time of the BMW X3M?

Must Transmission Fluid Be Replaced According to the Model?

How to Determine the Number of Pistons in a Brake Caliper?

What does a vehicle inspection check?

What Causes the Squeaking Noise from the Rear Wheels When the Car is Moving?

When did China V trucks start production?

Mercedes-Benz E200L Dimensions