What are the differences between the Bora Legend and the Bora?

1 Answers
Jenkins
07/30/25 2:23am
The differences between the Bora Legend and the Bora are: 1. Different body dimensions: The Bora Legend is 4562mm long, 1793mm wide, and 1468mm high, with a wheelbase of 2614mm; the Bora is 4663mm long, 1815mm wide, and 1462mm high, with a wheelbase of 2688mm. 2. Different minimum ground clearance: The Bora Legend has a minimum ground clearance of 122mm; the Bora has a minimum ground clearance of 126mm. Both the Bora Legend and the Bora feature MacPherson independent front suspension and torsion beam non-independent rear suspension, and both are equipped with a 1.5L naturally aspirated engine.
Was this review help?
8
0
Share
More Forum Discussions

How many drain ports does a Yuchai engine have?

Yuchai engines have 2 drain valves. Features of Yuchai engines: The four-cylinder Yuchai engine can convert one form of energy into another more useful form of energy. Typically, it converts chemical energy into mechanical energy. Sometimes, the engine can refer to both the power generation device and the entire machine including the power unit, such as gasoline engines and aircraft engines. The main component of the engine is the cylinder, which serves as the power source of the entire vehicle. Precautions for using four-cylinder Yuchai engines: It is essential to use engine oil with the appropriate quality grade, as this is key to ensuring the normal operation of the engine. If substitute oil must be used temporarily, close monitoring is required. In cases where oil supply is delayed or suitable oil is unavailable, substitute oil can be used temporarily. However, during use, it is necessary to closely monitor the oil quality and check whether the oil filter is clogged. Any issues should be addressed promptly by stopping the engine. Selecting oil with the appropriate viscosity is also crucial. The oil viscosity should be chosen based on local temperatures; otherwise, it may lead to accelerated wear of engine components or even cause bearing failure accidents.
13
4
Share

What are the precautions for driving on slippery roads?

Precautions for driving on slippery roads include maintaining a safe distance from the vehicle ahead, turning on fog lights, and reducing speed in advance when turning. Maintaining a safe distance from the vehicle ahead: Try to keep a certain distance from the vehicle in front while driving, avoid tailgating, and refrain from frequent overtaking. Also, maintain an appropriate speed and avoid high-speed driving. In areas with many pedestrians, be sure to slow down and pay more attention to the situation ahead and around you. Turning on fog lights: When the fog is heavy, turn on the fog lights. On sharp curves, do not turn the steering wheel abruptly. If the front wheels skid, promptly turn the steering wheel in the opposite direction of the skid. If the rear wheels skid, immediately reduce the throttle and turn the steering wheel slightly in the direction of the skid. If you suddenly encounter a puddle on the road, avoid slamming on the brakes to prevent losing control of the vehicle. Reducing speed in advance when turning: When the car is turning, reduce the speed in advance and control the direction properly. Turn the steering wheel slowly and steadily to prevent skidding during the turn.
8
3
Share

How to Reset the Maintenance Light on Teana?

Teana maintenance light reset is divided into new Nissan Teana maintenance light reset and old Nissan Teana maintenance light reset. 1. Steps to reset the maintenance light for the new Nissan Teana: (1) First, push the ignition switch to the "ON" position and ensure the vehicle is in a stopped state. (2) Use the steering wheel's toggle buttons to switch the instrument display to the maintenance settings. (3) Press and hold the "TRIP RESET" button for about 5 seconds to reset it, and the maintenance light will disappear. 2. Steps to reset the maintenance light for the old Nissan Teana: (1) First, push the ignition switch to the "ON" position and ensure the vehicle is in a stopped state. (2) Then, press the NEXT switch button to select the warning check mode, where you can find the engine oil option, and press ENTER to enter. (3) Finally, press and hold the ENTER switch button for more than 1 second to reset the oil change maintenance mileage, and the maintenance light will disappear. The Teana maintenance light is designed to remind you when it's time for your vehicle's maintenance.
1
1
Share

What are the dimensions of the BMW X7?

The BMW X7 measures 5163mm in length, 2000mm in width, and 1835mm in height, with a wheelbase of 3105mm. The BMW X7 is the first full-size SUV under the BMW brand and also the largest model ever produced by BMW. Below is an introduction to the BMW X7: 1. The 2020 BMW X7 largely retains the design style of the concept car, with the center console slightly tilted toward the driver's side, effectively embodying the 'driver-centric' design philosophy. The full LCD instrument cluster, paired with a 12.3-inch central control touchscreen, delivers an outstanding interactive experience. The independent display in the air conditioning control area is distinctive, and the crystal gear shift knob crafted by Swarovski significantly enhances the luxurious ambiance. 2. In terms of power, the X7 is equipped with either a 3.0T L6 or a 4.4T V8 engine. The 3.0T engine delivers a maximum power of 250kW and a peak torque of 450Nm, while the 4.4T engine boasts a maximum power of 342kW and a peak torque of 649Nm. The transmission system features an 8-speed automatic transmission and comes standard with the xDrive all-wheel-drive system. Additionally, the vehicle is equipped with adaptive suspension, four-wheel steering system, and various advanced active and passive safety systems.
20
4
Share

Can the Wuling Hongguang mini be charged at a charging station?

The Wuling Hongguang mini can be charged at a charging station. A home 220V charging station is sufficient to charge the Wuling Hongguang mini. The Hongguang MINIEV can directly use a standard household grounded 220V three-pin power source for charging. Precautions when using a charging station: Do not charge in areas with standing water: to avoid battery damage caused by water immersion.
17
0
Share

Where is the tire pressure reset button for the new Infiniti QX50?

Tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, only replacement with a new part is possible.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.