What are the differences between the Bora Automatic Comfort and Elite models?

2 Answers
Duncan
07/28/25 9:52pm
The differences between the Bora Automatic Comfort and Elite models lie in their configurations, with the specific distinctions as follows: The Automatic Elite model includes additional features compared to the Automatic Comfort model, such as a keyless start system, front keyless entry function, pre-collision safety system, and dual-zone climate control. Here is some relevant information about the Bora: The Volkswagen Bora is positioned as a compact car, with the 2019 and 2020 models currently on sale, launched in March 2019 and September 2019, respectively. The 2020 Bora models all comply with the China VI emission standards, feature front-wheel drive, and are priced between 86,000 RMB and 120,800 RMB. The 2020 Bora measures 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm.
Was this review help?
5
4
Share
ElenaMarie
08/12/25 2:26am
I've driven the Bora Auto Comfort and Elite models several times, and the most noticeable differences lie in comfort and features. The Elite model comes with full leather seats that are moderately firm, providing excellent lumbar support for long drives—far superior to the fabric seats in the Comfort model. The air conditioning is also smarter, featuring dual-zone temperature control, so kids in the back don't complain about the heat during summer drives. In terms of handling, the Elite model includes additional assist systems like blind-spot monitoring, which alerts you to vehicles approaching from the side in traffic—a feature that adds peace of mind. The audio system is upgraded too, delivering more immersive sound with less interference during calls or music playback. The Elite model costs about 15,000 yuan more, but from a usability perspective, these upgrades genuinely enhance daily commutes, especially during frustrating rush-hour traffic when these details make a real difference. Additionally, the Elite model boasts better wheel materials and more stable brake response, reducing minor bumps and elevating the overall driving experience.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

Does a Newly Replaced Clutch Need a Break-in Period?

A newly replaced clutch does require a break-in period. Here are some precautions to take during the clutch break-in period: 1. Regarding speed, there's no need to maintain a constant speed, but avoid exceeding two-thirds of the maximum speed. Keep the engine RPM below 3000-3500 (requirements may vary by manufacturer). Avoid sudden acceleration or hard braking. 2. Do not overload the vehicle. Regularly check tire pressure, coolant level, and brake fluid. 3. When driving downhill for extended periods, control your speed carefully. Avoid abrupt engine braking. For manual transmission vehicles, anticipate gear shifts in advance and avoid shifting at inappropriate speeds.
17
3
Share

What are the precautions for using waterless coolant?

Precautions for using waterless coolant are as follows: 1. After switching to engine waterless coolant, do not add water or other coolants to avoid affecting the optimal performance of the product. 2. If you find that the waterless coolant is insufficient during driving and the engine temperature is slightly high, and there is no waterless coolant in the car, you can add some purified water as an emergency solution. Then, when conditions permit, completely replace the coolant with high-quality waterless coolant to restore the original performance of the vehicle. The following are the usage restrictions for waterless coolant: 1. For vehicles with more than 30,000 kilometers, the cooling system must be thoroughly cleaned with a cooling system cleaner before application to prevent deposits in the water passages. 2. New vehicles or those with less than 30,000 kilometers do not require cleaning.
13
3
Share

Why is the car air conditioning compressor not starting?

There are several reasons why a car's air conditioning compressor may not start: 1. It is very likely due to compressor circuit issues. Disconnect the power supply to the compressor relay and bridge the compressor pins to make the compressor engage. 2. Another possibility is that the intake air temperature sensor or temperature control sensor in the air conditioning system is damaged, preventing temperature detection and the transmission of electrical signals, which stops the compressor from engaging. In this case, simply replacing the temperature control sensor will solve the problem. 3. Other factors such as insufficient refrigerant in the car air conditioning compressor or a faulty relay could also prevent the compressor from engaging.
14
0
Share

The Difference Between Direct Injection and Multi-Point Electronic Injection

The main differences between direct injection and multi-point electronic injection are as follows: 1. In multi-point electronic injection, the injectors are installed on the intake manifold, where fuel and air begin to mix before entering the cylinder; direct injection sprays fuel directly into the cylinder. 2. Compared to direct injection, multi-point electronic injection has lower requirements for fuel quality; direct injection has more complex components and is more expensive than multi-point electronic injection. 3. Multi-point electronic injection technology is mature and cheaper but consumes more fuel; direct injection has advantages in both performance and fuel consumption. 4. Multi-point electronic injection has higher combustion efficiency and can release more power compared to direct injection of the same displacement.
16
0
Share

How to Protect Your Car from Sun Damage in Summer?

Methods for protecting your car from sun damage in summer are as follows: 1. Leave appropriate window gaps when parking: The excessively high temperature inside the car is due to it being too sealed. Continuous exposure to sunlight will continuously accelerate the temperature inside the car, while the scorching air inside cannot dissipate, leading to an increasingly hotter interior that is much warmer than the outdoor temperature. Leaving a two to three-finger gap in the windows can prevent excessive temperature differences between the inside and outside. 2. Park in the shade: The most direct source of high temperature inside the car is sunlight. Parking in the shade effectively avoids direct sunlight, not only lowering the car's temperature but also reducing paint damage, thereby decreasing the frequency of car maintenance.
20
3
Share

What Causes the Inability to Shift Gears When the Clutch Pedal is Depressed?

The reasons for being unable to shift gears when the clutch pedal is depressed are: 1. The clutch pedal, clutch master cylinder transmission mechanism is disconnected or stuck; 2. The clutch master cylinder is leaking or stuck; 3. There is a pipeline leakage phenomenon; 4. There is a slave cylinder leakage phenomenon or abnormal mechanical transmission phenomenon. The solutions for being unable to shift gears when the clutch pedal is depressed are: 1. Avoid prolonged semi-engagement state; 2. Fully depress the clutch pedal before shifting gears; 3. When emergency braking, simultaneously press the brake and clutch. The clutch is located in the flywheel housing between the engine and the transmission, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.