What are the differences between the BMW 3 Series Launch Edition and Sport Edition?

1 Answers
AdrielRose
07/24/25 8:35pm
The differences between the BMW 3 Series Launch Edition and Sport Edition lie in their configurations: The Launch Edition features a luxury steering wheel, chrome-plated T-shaped decorations on the front sides, chrome-plated grille, window frame trims, and exhaust pipes. The Sport Edition comes with a new M Sport steering wheel, M Sport alloy wheels, a grille with black high-gloss vertical slats, and window frame trims made of matte-finished aluminum. The dimensions of the BMW 3 Series Sport Edition are 4719mm in length, 1827mm in width, and 1459mm in height, with a wheelbase of 2851mm. It has a top speed of 222 km/h and is equipped with an 8-speed automatic transmission.
Was this review help?
5
4
Share
More Forum Discussions

Where is the Skoda fuel pressure sensor located?

The fuel pressure sensor is installed in the fuel inlet line leading to the two high-pressure fuel pumps. High-pressure fuel pressure sensor: This sensor is used in direct injection engines. It measures the fuel pressure in the high-pressure fuel system and sends the signal to the engine control unit. Signal function: The engine control unit analyzes this signal and regulates the pressure in the fuel distributor line via two fuel metering valves. Low-pressure fuel pressure sensor: The sensor is installed in the fuel inlet line leading to the two high-pressure fuel pumps. It measures the fuel pressure in the low-pressure fuel system and sends the signal to the engine control unit. Signal function: The engine control unit uses this signal to control the low-pressure fuel system. Based on the sensor signal, the engine control unit sends a signal to the fuel pump control unit, which then adjusts the electric fuel pump as needed according to this signal.
8
0
Share

What is the channel number for the Passat wheel speed sensor?

The sensor channel numbers range from 31 to 34. The sensor utilizes the Nernst principle: It employs a ceramic sensing element to measure the oxygen potential in the vehicle's exhaust pipe. Based on chemical equilibrium principles, it calculates the corresponding oxygen concentration, thereby monitoring and controlling the air-fuel ratio of combustion to ensure product quality and compliance with exhaust emission standards. The ECU determines whether the air-fuel ratio is too low or too high based on the electromotive force difference from the oxygen sensor and adjusts the fuel injection duration accordingly. However, if the oxygen sensor malfunctions and outputs abnormal electromotive force, the (ECU) computer cannot precisely control the air-fuel ratio. Relevant requirements for oxygen sensors: Since the purification capability of the three-way catalyst for CO, HC, and NOx drops sharply once the air-fuel ratio of the mixture deviates from the theoretical value, an oxygen sensor is installed in the exhaust pipe to detect the oxygen concentration in the exhaust and send feedback signals to the ECU. The ECU then adjusts the fuel injection quantity to maintain the air-fuel ratio of the mixture near the theoretical value.
10
3
Share

What Can Be Checked in the Hidden Menu of a BMW Dashboard?

BMW dashboard hidden menu can display water temperature, the exact manufacturing date of the vehicle down to the day, actual fuel consumption, current mileage, average speed since the last reset, voltage, and other vehicle data. Introduction to the Dashboard: The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Reasons for Dashboard Not Lighting Up: Damage to the dashboard lights; faults in the dashboard power supply circuit, such as open circuits or short circuits, can also cause the car dashboard not to light up; blown fuse for the car dashboard power supply.
2
3
Share

What Causes the BMW 525's Air-Fuel Mixture Adjustment to Be Too Rich?

BMW 525's air-fuel mixture adjustment being too rich may be due to insufficient air or excessive fuel. Insufficient air: Insufficient air can result from a dirty air filter affecting intake; a damaged or inaccurate air flow meter; air leaks, such as in the piping from the air flow meter to the valves; turbocharger causing leaks in the engine's piping; or carbon buildup in the intake system, such as in the throttle body or intake manifold. Excessive fuel: Excessive fuel can be caused by high fuel pressure; damaged or carbon-clogged fuel injectors leading to leaks; faulty charcoal canister or purge valve; oil entering the combustion chamber, such as due to crankcase ventilation issues; or faulty oxygen sensors and catalytic converters causing the engine control unit to deliver incorrect fuel injection amounts.
10
4
Share

Does Tuano need to add urea?

Tuano needs to add urea. Definition of automotive urea: It is a liquid used in SCR technology to reduce nitrogen oxide pollution in diesel vehicle exhaust. The role of automotive urea is mainly to purify exhaust gases in vehicles. It can react with nitrogen oxides in the exhaust to reduce nitrogen oxide emissions. Automotive urea also optimizes engine performance and fuel consumption. Adding urea is to treat NOx nitrogen oxides in the exhaust. Without urea, the exhaust emissions cannot meet the standards. Automotive urea refill cycle: Automotive urea should be refilled approximately every 2,000 kilometers. For every 100 liters of diesel, 3 to 5 liters of urea are used. The usage of urea is equivalent to 3% to 5% of fuel consumption. When the urea level drops below 20%, it is necessary to promptly add automotive urea.
8
2
Share

Where is the child lock on the rear door of the Skoda Octavia?

Skoda Octavia rear door child lock is located on the rear doors, featuring a rotary knob switch that requires the owner to manually lock it using a key from the rear door. Introduction to child locks: Car child locks, also known as door lock child safety mechanisms, are installed on the rear door locks. When the rear door is opened, there is a small lever (safety mechanism) below the door lock. By sliding it towards the end with the child icon and then closing the door, the door cannot be opened from the inside, only from the outside. Function of child locks: Their purpose is to prevent active and unaware children from opening the door while the vehicle is in motion when seated in the rear, thereby avoiding danger. This ensures that the door can only be opened from the outside by an adult after the vehicle has stopped.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.