What are the differences between the Avalon 2.0 and 2.5?

1 Answers
DakotaLynn
07/30/25 9:58am
The differences between the Avalon 2.0 and 2.5 are as follows: 1. The biggest difference between the Avalon 2.0 and 2.5 is the engine and transmission. The Avalon 2.5L uses a 2.5L naturally aspirated engine paired with an Aisin 8-speed automatic transmission, while the Avalon 2.0 uses a 2.0L naturally aspirated engine paired with a CVT transmission. 2. Additionally, their fuel consumption and prices differ. The Avalon 2.0 has a combined fuel consumption of 5.8L per 100km as per the MIIT standards, while the Avalon 2.5 has a combined fuel consumption of 6.2L per 100km. 3. There are also differences in configuration, mainly in some details. The 2.5L version of the Avalon has certain advantages in terms of configuration, while the 2.0L version only has slight advantages in the Carlife function and automatic mirror folding when locking the car, but these advantages are not significant.
Was this review help?
7
0
Share
More Forum Discussions

What is the issue with Nissan Sylphy U1000 fault repair?

Nissan Sylphy U1000 fault is a communication trouble code. The communication trouble code involves multiple systems, and any module participating in communication can trigger it. Often, it may be an intermittent fault, requiring analysis with other symptoms to determine which component is malfunctioning. Below are the causes of circuit faults in Nissan Sylphy: 1. Carbon deposits can cause incomplete combustion of gasoline, leading to engine shaking. 2. Throttle body malfunction. Recommendation: Clean the throttle body, replace the ignition coil, and change the spark plugs. Below are the impacts of engine carbon deposits on the vehicle: 1. Reduced engine power, resulting in uneven and gradually decreasing power output. 2. Increased fuel consumption, adding to economic burden. 3. Difficult cold starts, meaning hard ignition or trouble starting the engine. 4. Severe carbon deposits in the combustion chamber can cause cylinder knocking, noise during low-speed acceleration, damage to pistons and crankshaft, and engine overheating, severely affecting vehicle safety. 5. Exceeding emission standards, failing annual inspection tests, and directly worsening environmental pollution hazards.
1
4
Share

What are the differences between T-Roc and Tacqua?

The differences between T-Roc and Tacqua are as follows: 1. Tacqua was launched in December 2019, while T-Roc was launched in July 2018. 2. T-Roc is a compact SUV, whereas Tacqua is a small SUV. 3. In terms of interior design, T-Roc has its air vents positioned on both sides of the screen, while Tacqua's are located below the screen. 4. The center console layout of T-Roc is more conventional, while Tacqua's is tilted towards the driver's side. 5. In terms of powertrain, T-Roc offers 1.2T and 1.4T engine options, whereas Tacqua provides 1.5L and 1.4T options. Both T-Roc and Tacqua share the same EA211 1.4T engine with identical power specifications. The 1.4T engines in both models are paired with a 7-speed dual-clutch transmission. However, T-Roc additionally offers a top-tier all-wheel-drive variant, which uses a wet-type 7-speed dual-clutch transmission, while the front-wheel-drive versions of both models are equipped with a dry-type dual-clutch transmission.
16
4
Share

How to Get into the Rear Seats of a Camaro?

Here are the steps to access the rear seats of a Camaro: 1. First, adjust the front seats to their foremost position. 2. Locate the lever on the side of the seat and recline the seatback to its most forward position. 3. You can now directly enter the rear seats. Below is a detailed introduction to the Camaro: 1. The Saleen Camaro is based on the new-generation Chevrolet Camaro, featuring a two-door, four-seat design with dimensions of 4840/1920/1380mm (length/width/height) and a wheelbase of 2852mm. It offers both hardtop and soft-top convertible body styles. 2. The 2015 Saleen Camaro comes with three engine options: the base model is equipped with a 3.6L V6 naturally aspirated gasoline engine, delivering a maximum power of 254kW (345PS) and peak torque of 385Nm, paired with a 6-speed automatic transmission. The 0-100km/h acceleration time is 5.7 seconds, with a top speed of 240km/h. The mid-range option features a 6.2L V8 naturally aspirated gasoline engine, producing a maximum power of 331kW (450PS) and peak torque of 569Nm, also matched with a 6-speed automatic transmission. Its 0-100km/h acceleration time is 4.4 seconds, and top speed is 270km/h. The high-performance variant is powered by a 6.2SC V8 supercharged gasoline engine, generating a maximum power of 471kW (640PS) and peak torque of 803Nm, coupled with a 6-speed automatic transmission. It achieves a 0-100km/h acceleration time of 4.0 seconds and a top speed of 290-300km/h.
12
1
Share

How to Disable the Cruze Anti-Theft System?

To disable the Cruze anti-theft system, follow these steps:1. Turn on the ignition switch, press and hold the unlock button on the remote for about 5 seconds.2. The car-with-lock warning light on the dashboard will turn off.3. Turn off the ignition switch and start the engine to complete the process. The anti-theft systems are categorized as follows:1. Engine Immobilizer System (IMMO, immobilization) - the factory-installed chip-based anti-theft system.2. Remote Keyless Entry (RKE, Remote-Keyless-Entry) - remote-controlled anti-theft system.3. Passive Keyless Entry (PKE, Passive-Keyless-Entry/GO) - smart key push-to-start system.
9
1
Share

How to Reset the Maintenance Light on Jeep Renegade?

Jeep Renegade requires maintenance before the maintenance light reset operation can be performed. The SERVICE indicator on the Renegade's instrument display is the maintenance cycle indicator light. When the ignition switch is in the ON position, the SERVICE icon on the display will flash, and the indicator will disappear after starting the engine, indicating that the vehicle requires maintenance. The method to reset the maintenance light on Jeep Renegade is as follows: 1. Press the one-touch start button on the Renegade. 2. Within 10 seconds, slowly press and release the accelerator pedal, repeating this action three times. 3. Finally, press the one-touch start button again to turn off the engine. 4. When starting the Renegade again, if the dashboard displays 'Change-oil' or 'Oil-change-required,' it means the reset was unsuccessful, and the above steps need to be repeated.
17
4
Share

Where is the fuse location for Lexus RX?

The fuse location for Lexus RX is next to the engine, in front of the steering wheel, inside the hood. The fuses are installed in the car fuse box, which can be divided into small, medium, and large car fuse boxes based on the size of the installed fuses. The following are two different types of fuses: 1. Blade fuses are thinner, plug-in type, allowing circuit current of 5-25A. 2. Slow-blow fuses are square, plug-in type, allowing circuit current of 20-60A. The color represents the amperage of the fuse, and the amperage can be clearly distinguished based on the color, which is also marked on the fuse.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.