What are the differences between the Audi Q5 and Audi Q5L?

1 Answers
DelMax
07/30/25 1:10am
The differences between the Audi Q5 and Audi Q5L lie in their body dimensions: The Audi Q5 measures 4629mm in length, 1898mm in width, and 1655mm in height, with a wheelbase of 2807mm; whereas the Audi Q5L measures 4765mm in length, 1893mm in width, and 1659mm in height, with a wheelbase of 2908mm. Both models are equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, a maximum power speed range of 4300 to 6000rpm, a maximum torque of 320Nm, and a maximum torque speed range of 1500 to 4200rpm. They are paired with a 7-speed dual-clutch transmission.
Was this review help?
1
4
Share
More Forum Discussions

What is the reason for the Baojun 510 prompting to shift to neutral when starting?

The reason for the Baojun 510 prompting to shift to neutral when starting is: the transmission mistakenly sensed it was not in neutral, so you need to shift out of neutral and then shift back into it. Taking the 2021 Baojun 510 as an example, it is a compact SUV with body dimensions of: length 4220mm, width 1740mm, height 1615mm, a wheelbase of 2550mm, a fuel tank capacity of 45 liters, and a curb weight of 1206kg. The 2021 Baojun 510 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum torque of 135Nm, and a maximum power of 73kW, paired with a 6-speed manual transmission.
16
1
Share

What brand are the original tires on the Mercedes-Benz E300L?

The Mercedes-Benz E300L uses Bridgestone TURANZA run-flat tires, with the original tire model being 245/45R18. The replacement cycle for Mercedes-Benz E300L tires is 60,000 to 120,000 kilometers. If the tires have been in use for more than six years, even if there are no obvious signs of damage, they should be inspected. The most important parameter of a car's tires is the tire pressure value. The car's tire pressure monitoring system provides safe and effective protection for driving. Tire pressure may increase or decrease depending on temperature and region, so it is necessary to determine whether the tire pressure is within the normal range based on current conditions. The tire pressure range varies depending on the model and size of the car's tires, and should be determined based on actual conditions. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening its lifespan; increases body vibration, indirectly affecting the lifespan of other components; causes excessive stretching and deformation of the tire cords, reducing tire elasticity and increasing the load on the car during driving. Hazards of underinflated tires: Increases the friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing risks to driving safety; increases movement in various parts of the tire, leading to abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to damage and abnormal wear at the bead area; multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout.
19
5
Share

What does sp0rt mean for a vehicle?

sp0rt means the vehicle enters sport mode, where the power performance of the vehicle becomes stronger, commonly used for overtaking, uphill driving, long downhill driving, traffic jams, and carbon deposit cleaning. The functions of sport mode are: 1. Keeping the vehicle with sufficient torque to enhance power performance; 2. The suspension becomes stiffer, support force increases, throttle sensitivity enhances, and engine intake increases; 3. High engine speed can also help remove carbon deposits. The method to use the vehicle's sport mode is: 1. During vehicle driving, directly push the d gear into s gear without stepping on the brake; 2. Step on the accelerator after shifting.
8
0
Share

What Causes the Gurgling Sound from the Exhaust Pipe in Winter?

Winter exhaust pipe gurgling sounds occur because: the air-fuel mixture is too rich and not completely burned, combined with prolonged combustion time in the cylinder. When the engine begins the next power stroke, unburned combustible mixture enters the exhaust pipe along with the expelled exhaust gases. Upon encountering fresh air in the exhaust pipe, this mixture reignites, producing the gurgling sound. Methods for maintaining the exhaust pipe include: 1. Preventing water from entering the exhaust pipe interior; 2. Applying anti-rust oil inside the exhaust pipe; 3. Regularly inspecting the exhaust pipe condition; 4. Avoiding prolonged high-revving while stationary.
3
5
Share

What Causes the Clicking Sound When Turning with Winter Tires?

The reason for the clicking sound when turning with winter tires is: Low temperatures cause the tires to harden, reducing the grip limit. When turning, the tire exceeds its grip limit, resulting in slipping. The unusual noise is the sound of friction between the tire and the ground. Methods for maintaining car tires: 1. Regularly check tire pressure; 2. Remove debris from tire treads; 3. Inspect tire wear and replace them promptly if necessary; 4. Perform tire rotation. Tire rotation ensures even wear across all four tires, preventing excessive wear. The functions of tires are: 1. Supporting the entire weight of the vehicle and bearing the load; 2. Transmitting traction and braking torque to ensure adhesion between the wheels and the road surface.
16
2
Share

What is the method for replacing a car antenna?

Car antenna replacement method is: 1. Open the rear trim panel and forcefully release the two clips on the right side; 2. Slide the trim panel to the right, remove the three clips on the left side, and disconnect the antenna connector; 3. Peel back the roof lining to locate the antenna screw; 4. Use a wrench to remove the screw, take off the original antenna, install the new antenna, and reassemble everything. The function of a car antenna: It is used to receive external signals. Besides signal reception, the car antenna also serves as a static electricity discharger, releasing accumulated static electricity from the car body to protect passenger safety and the vehicle's circuitry. In some high-end cars, the antenna also has an aerodynamic function to manage air turbulence.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.