What are the differences between the Audi A7 and A8?

1 Answers
MacIvan
07/30/25 4:12am
Here are the specific differences between the Audi A7 and A8: Positioning: The A7 is positioned as a luxury C-class coupe, meaning it is actually in the same class as the A6; whereas the A8 is a luxury D-class executive sedan. Therefore, in terms of positioning, the A7 is a lower class than the A8. Moreover, the two have distinct market differentiations. The Audi A7 is a four-door sports luxury coupe, primarily targeting sportiness, handling, and younger audiences, while the Audi A8 is a luxury executive full-size sedan, focusing more on business receptions, corporate use, etc. Thus, ride comfort and the creation of a luxurious ambiance are the A8's key priorities. Vehicle characteristics: Compared to the A8, the Audi A7 features a more streamlined and sporty fastback design, with a more dynamic overall appearance, and its tuning is also more performance-oriented. On the other hand, the A8 offers unparalleled ride comfort, noise insulation, and a sense of luxury that the A7 cannot match.
Was this review help?
13
1
Share
More Forum Discussions

When to Use High Beams?

High beams should only be used when there are no other lighting facilities on the road and no oncoming vehicles. Below are relevant introductions about the use of high beams: 1. The dangers of improper use of high beams: causing visual blind spots, leading to accidents, and resulting in driver operation errors. 2. High beams cannot be used at intersections controlled by traffic signals because the intense light can cause temporary dizziness. Therefore, the use of high beams is not allowed in urban areas. When overtaking at night, high beams and low beams should be used alternately to alert the vehicle ahead.
15
2
Share

How many points deducted from the driver's license require retraining?

If a driver accumulates 12 penalty points on their license during the probationary period, the license will be revoked, and the driver must undergo retraining and retake the driving test. If 12 points are accumulated after the probationary period, the driver is required to attend a 7-day training course and retake the theoretical test (Subject 1). Detailed information is as follows: Motor vehicle drivers who accumulate 12 penalty points within a single scoring cycle must report to the traffic management department of the public security authority at the license issuance location or the location of the violation within 15 days to receive a 7-day education program on road traffic safety laws, regulations, and related knowledge. After completing the education program, the vehicle management office must administer the Subject 1 test to the driver within 20 days.
11
5
Share

What Causes the Clicking Sound When Braking?

Possible causes of abnormal noises during car braking include: 1. The car is new or has just had new brake pads installed, which is a normal phenomenon. 2. Rust on the brake disc or brake pads: After prolonged parking, especially in humid climates or after rain, rust or dirt may form on the brake disc or brake pads. In such cases, applying butter or specialized lubricating oil at the connection between the brake pads and brake calipers can help. 3. Excessive wear on the brake disc and brake pads: Both the brake disc and brake pads are high-wear items. Every time the brakes are applied, these two components rub against each other, leading to natural wear over time. When the wear becomes excessive, abnormal noises may occur, so regular inspection and replacement are necessary.
12
0
Share

What Causes Vehicle Pulling to One Side?

Here are the reasons for vehicle pulling to one side: 1. Incorrect wheel alignment. In most cases, this can be resolved by performing a wheel alignment. However, if the problem persists after alignment, it must be caused by other factors. 2. Different tread patterns or uneven tread depth on the left and right tires. It's best to use the same type of tires for the entire vehicle with identical tread depth. Tires exceeding the wear limit must be replaced. 3. Unequal tire pressure on both sides. Different tire pressures will cause tires to become uneven in size, inevitably leading to pulling when rolling. 4. Uneven spring deformation of front shock absorbers. The condition of shock absorber springs can be judged by pressing or comparing after removal. 5. Failed front shock absorbers. When front shock absorbers fail, the suspension becomes uneven during driving, causing uneven force distribution and resulting in pulling. 6. Excessive wear of vehicle chassis components causing abnormal gaps. Common parts prone to excessive gaps include steering linkage ball joints, control arm bushings, and stabilizer bar bushings. 7. Poor brake return or incomplete separation on one wheel. This is equivalent to applying partial braking on one side continuously, causing the vehicle to pull while driving. 8. Overall frame deformation. Excessive difference in wheelbase between both sides beyond the maximum allowable range.
14
5
Share

What are the reasons for compressor failure?

The reasons for automotive air conditioning compressor failure are: 1. Poor internal lubrication of the compressor; 2. Unclean air conditioning system; 3. Excessive refrigerant or lubricating oil in the system; 4. Slippage of the compressor's electromagnetic clutch causing excessive friction temperature; 5. Insufficient power configuration of the compressor. The methods to check for automotive air conditioning compressor failure are: 1. Check for oil stains at the connections and seams of each device; 2. Check whether the HVAC valve or thermal control damper is closed, and whether other damper adjustments are normal; 3. Check whether the condenser fan is operating properly; 4. Check whether the drive belt is broken or loose if the drive belt is too loose.
4
3
Share

What Causes Aging and Cracking in Car Tires?

Cracking, stickiness, hardening, softening, powdering, discoloration, and mold growth are all normal manifestations of aging in rubber products, and car tires are no exception. More details are as follows: 1. Starting with the material of the tire, the main component of a tire is rubber. The maximum storage and anti-aging time for rubber, from natural latex to ethylene-propylene and nitrile rubber, does not exceed 10 years. The average service life of various rubber products in use is 3-5 years. 2. Additionally, tires bear the weight of the entire vehicle, frequently serve to cushion impacts, and must also resist corrosive rainwater and car wash cleaning solutions. As a result, the aging of tires is significantly accelerated. 3. Generally, after 2-3 years of use, small cracks begin to appear on the sidewalls of tires. If a large number of fine cracks are observed on the sidewalls, the tires should be replaced. Typically, the wear lifespan of tires is around 30,000 to 50,000 kilometers. However, even if the tires have not reached the wear limit or mileage, if they have been in use for 5 years or show significant cracking on the sidewalls, they should be replaced.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.