···
Log in / Register

What are the differences between the Audi A4 Fashion and Progress models?

5 Answers
VonMiles
07/28/2025, 02:49 PM

Audi A4 Fashion and Progress models differences: 1. Different seat materials: The Fashion model is equipped with leather seats; the Progress model is equipped with fabric seats. 2. Different configurations: The Fashion model has rear independent air conditioning and rear air vents; the Progress model does not have rear independent air conditioning or rear air vents. 3. Different wheel hubs: The Fashion model has 18-inch aluminum alloy polished wheels; the Progress model is equipped with 17-inch wheels. The Fashion model is equipped with a 12.3-inch full LCD instrument panel, while the Progress model does not have this feature. The Fashion model also comes with an 8.3-inch LCD screen, whereas the Progress model's LCD screen is only 7 inches and lacks auxiliary configurations such as a reversing camera, GPS navigation system, navigation traffic display, road rescue call, and car networking.

Was this review help?
7
4
Share
SanJeffrey
08/11/2025, 06:44 PM

Last time I went to see the Audi A4 with my friend, I focused on comparing the Fashion and Progressive models. The Fashion version, as the base model, is much cheaper with simpler configurations, featuring fabric seats and manual air conditioning. The Progressive model is more expensive but comes with many upgrades, like leather seats and automatic dual-zone climate control, making the drive more comfortable. In terms of power, both use a 2.0T engine, but the Progressive version has a stronger tune, offering faster acceleration and more stable high-speed overtaking. There are also differences in appearance—the Progressive model comes with LED headlights and larger wheels, giving it a cooler look. For interior tech, the Progressive version has a larger screen and supports Apple CarPlay for more accurate navigation. Overall, the difference lies in value for money: the Fashion version is budget-friendly and sufficient, while the Progressive version offers a more premium experience. I recommend test-driving both, especially for city commuting, where the differences are quite noticeable.

Was this review help?
2
1
Share
Expand All
ArabellaAnn
09/30/2025, 12:26 AM

As someone who has bought a car for the family, I've researched these two models. The Audi A4 Fashion model is the entry-level version, with its main advantages being lower price and fuel consumption. The Progressive model is more high-end, equipped with safety features like adaptive cruise control and emergency braking, making it much safer for long-distance driving. The interior materials differ, with the Progressive model using leather and heated seats, keeping your back warm in winter. Both share the same basic engine, but the Progressive model has slightly more horsepower and more responsive performance. The price difference is tens of thousands, but the Progressive model offers more comfortable seats and driver assistance systems, making it worth the extra cost. In terms of ownership costs, maintenance fees are similar for both, but the Progressive model has more electronic features, which might mean slightly more potential faults. Personally, I think the Progressive model is more suitable for families or those who frequently drive on highways. Remember to test drive both to truly feel the differences.

Was this review help?
20
2
Share
Expand All
SanGavin
11/13/2025, 01:18 AM

When discussing the differences between Audi A4 models from a driving perspective, the Fashion and Progressive versions have similar power but differ in details. Both are equipped with 2.0T turbocharged engines, with the Progressive version offering slightly higher power and faster acceleration from a standstill. The seat materials vary significantly—the Fashion version has harder fabric seats, which can be tiring on long drives, while the Progressive version features leather seats with electric adjustment for better support. In terms of tech features, the Progressive version adds a large touchscreen and navigation system for added convenience. Lighting-wise, the Progressive version's LEDs are brighter. Price-wise, the Fashion version is more budget-friendly, while the Progressive version is pricier but includes more practical features. Fuel consumption is similar, though urban driving may show slight variations. If you're on a tight budget, go for the Fashion version; if comfort is a priority, choose the Progressive version.

Was this review help?
13
2
Share
Expand All
SanCarson
01/03/2026, 03:01 AM

I compared these two Audi A4 models, and the key difference lies in the configuration level. The Fashion version is more affordable, suitable for basic use, featuring manual seats and air conditioning. The Progressive version upgrades to leather interior, automatic air conditioning, and blind-spot monitoring for added safety. In terms of performance, both share the same engine, but the Progressive version has a stronger tune, offering quicker handling response. The price difference is tens of thousands, but the additional features justify the cost. The Fashion version has a simpler exterior, while the Progressive version boasts larger alloy wheels and more dazzling headlights. Fuel consumption differences are minimal, and maintenance costs are similar. Overall, the Progressive version is more suitable for those pursuing a quality lifestyle. Before purchasing, it's advisable to seek feedback from current owners.

Was this review help?
7
4
Share
Expand All
More Forum Discussions

What Causes Large Gaps in New Tire Installation and Failure to Inflate?

Here are the reasons why a new tire may not inflate properly after installation: 1. The air inlet hole of the valve core is blocked: Unscrew the pressure nut, remove the valve core, take off the valve rubber tube, and use a thin wire or needle tip to clear out any dirt or debris. 2. The valve rubber tube has melted and blocked the valve core hole: After removing the valve core, clean it with gasoline or similar solvent, then use a thin wire to clear the blockage. Once confirmed to be clear, replace it with a new rubber tube. 3. The air passage is blocked: Extremely cold weather may cause moisture in the valve rubber tube to freeze into ice, blocking the air passage. Remove and heat it to melt the ice, then shake off any water droplets. 4. Issues with the air pump: Inspect the air pump or try using a different one.
8
1
Share

What are the reasons for the Changan CS35 air conditioner not cooling?

Changan CS35 air conditioner not cooling reasons: cooling fan not working, refrigerant pressure too high or too low, refrigerant leakage. The following are related introductions: 1. Cooling fan not working: The cooling fan not working also has a great impact on the heat dissipation of the condenser and should be replaced in time. 2. Refrigerant pressure too high or too low: Refrigerant, also known as Freon, is the cooling medium inside the air conditioner. There will be some natural loss of refrigerant in the air conditioning system. If the refrigerant pressure is too low, the cooling effect will become worse, and if the refrigerant pressure is too high, the air conditioner will sometimes cool and sometimes not. Therefore, the refrigerant pressure must be adjusted to the standard range, neither too low nor too high. 3. Refrigerant leakage: More common leakage points include air conditioning pipelines, evaporator boxes and other parts, and related components need to be replaced.
5
5
Share

Will an Automatic Transmission Car Move Without Pressing the Accelerator After Starting?

Under normal circumstances, when the vehicle is in D gear, it will move forward without pressing the accelerator. Below are the reasons why the car moves in D gear without pressing the accelerator: Related to Power: As long as the engine is running, pressing or not pressing the accelerator only affects the amount of power output, not whether power is output. As long as the engine has power, the car will move forward. Only when in neutral gear will the car stop moving forward. Related to Fuel Supply: Modern vehicles are fuel-injected cars. After engaging the gear and gently releasing the clutch, the car's computer will automatically adjust and increase the fuel supply. Even if the accelerator pedal is not pressed, fuel is actually being supplied, so the car will move on its own. Once steady, pressing the accelerator allows for normal driving.
7
2
Share

What is the difference between Honda CBF190R and CB190R?

The two models are essentially the same, with only differences in price, color, and some minor exterior details. Both are Honda motorcycles equipped with a 184cc engine that delivers a maximum power of 11.8 kW and a maximum torque of 15 Nm. Here is some additional information: 1. Exterior: The two models are highly similar, even down to the wheel spoke design, though slight visual differences may be noticed due to color schemes. Additionally, the paintwork quality differs—the Wuyang Honda CB190R has superior paintwork, giving it a slightly better overall finish. 2. Configuration: The two models are nearly identical in terms of features, including the gear indicator LCD display, single-channel ABS, upgraded rear fork, and exhaust system, all of which are present on both the CB190R and the CBF190R. 3. Performance: Both models use the same powertrain and Honda's PGM-FI fuel injection system. However, the CBF190R's engine parameters are slightly adjusted, offering marginally better performance, though the real-world difference is negligible. Overall, the similarities between these two models far outweigh their differences.
7
0
Share

What engine is equipped in the Fengxing F600?

Fengxing F600 is equipped with a 2.0-liter naturally aspirated engine across all models. This is an MPV model, and the engine of this vehicle offers strong power. Below are the relevant details about the Fengxing engine: 1. The 2.0-liter naturally aspirated engine in the Fengxing F600 has a maximum power of 108 kW, a maximum torque of 200 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 rpm. 2. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed manual transmission, which is standard across all models of this vehicle. 3. The front suspension of the Fengxing F600 uses a MacPherson independent suspension, while the rear suspension employs a leaf spring non-independent suspension. The dimensions of the Fengxing F600 are 5080 mm in length, 1770 mm in width, and 1915 mm in height, with a wheelbase of 3200 mm.
17
0
Share

Where to Check the Tire Pressure Monitoring in KAMIQ?

KAMIQ uses an indirect tire pressure monitoring system, which only provides alerts without displaying data. When the tire pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure on the tire and affecting its grip. Below are related details: 1. Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. 2. Indirect Tire Pressure Monitoring: The working principle of indirect tire pressure monitoring is that when the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between tires, the system monitors tire pressure. The indirect tire pressure alert system essentially relies on calculating the rolling radius of the tires to monitor pressure.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.