What are the differences between the Accord Comfort Edition and Elite Edition?

1 Answers
MacTimothy
07/28/25 8:11pm
The main differences between the Accord Comfort Edition and Elite Edition lie in their configurations and interior craftsmanship. The Elite Edition is more expensive than the Comfort Edition and features a leather-wrapped steering wheel, leather/leatherette seats, electric adjustment for both the driver and front passenger seats, cruise control, and a rearview camera—features that are absent in the Comfort Edition. More details about the Accord are as follows: 1. In terms of exterior design, the Accord incorporates more youthful design elements, with a bold chrome strip on the front grille and integrated headlights creating a unified look. The side profile adopts Honda's popular fastback design, enhancing the car's sporty appearance. The rear features eye-catching C-shaped taillights and a dual-exhaust system, giving the rear a fuller look. 2. As a B-segment car, the Accord excels in body dimensions and space performance, measuring 4893mm in length, 1862mm in width, 1449mm in height, with a wheelbase of 2830mm. 3. In terms of powertrain, the Accord currently comes equipped with a 1.5T engine across all variants. The high-power 260TURBO model delivers a maximum power of 194 horsepower (143 kW) at 5500 rpm and a peak torque of 260 Nm between 1600-5000 rpm. The low-power 230TURBO model produces a maximum power of 177 horsepower (130 kW) at 6000 rpm and a peak torque of 230 Nm between 1500-3000 rpm.
Was this review help?
11
4
Share
More Forum Discussions

Why does the brake pedal not spring back after being pressed?

If the car's brake pedal does not spring back, it indicates issues with the brake caliper and brake wheel cylinder, requiring inspection at an after-sales service center. Below are methods for maintaining brake pads: Avoid sudden braking: Emergency braking causes significant damage to brake pads. When driving normally, it's important to brake gradually or use intermittent braking (pumping the brakes), as this reduces wear on the brake pads. Reduce braking frequency: Develop a habit of minimizing braking during normal driving. Use engine braking to slow down the vehicle before applying the brakes for further deceleration or stopping. Downshifting can also help in reducing speed. Regular wheel alignment: If the vehicle tends to pull to one side, promptly perform a four-wheel alignment to prevent tire damage and uneven wear on the brake pads on one side of the vehicle.
11
3
Share

What Causes the Failure of the Auto-Folding Mirror Function?

The reasons for the failure of the auto-folding mirror function are as follows: Reason 1: The battery is disconnected or dead. In this case, the exterior mirrors must be reset to function properly. The specific reset method is to manually operate the folding button. Reason 2: After setting the mirrors to fold when locking the car, they were folded manually. In this case, you need to enter the car and press the button on the door to manually unfold the exterior mirrors. Reason 3: The electric mirror motor is damaged, or the control switch fuse is blown. Due to long-term bending of the wiring during mirror folding, it may cause breakage or loose connections, leading to failure.
12
5
Share

How Long Will the Hazard Lights Last Before Draining the Battery?

If the car battery is fully charged, the hazard lights will typically drain the battery after approximately 10 to 15 hours of continuous use. Theoretical duration of operation: Most household car batteries have a capacity of 50-60Ah. When the hazard lights are activated, all six turn signal lights will flash. Assuming each light consumes 6-10W of power, a fully charged car battery can theoretically sustain the hazard lights for about 15 hours. Factors affecting usage duration: Hazard lights, also known as emergency warning lights, are signal lights designed to alert other vehicles and pedestrians that the car is experiencing a special situation. In practical use, the actual duration of the hazard lights depends on factors such as battery aging, additional auxiliary lights, and other power-consuming devices. As a result, the actual battery life may be slightly shorter than the theoretical value. Additionally, different car models may have varying power consumption rates.
10
1
Share

What Causes Oil Leakage at the Exhaust Manifold Interface?

Engine oil leakage at the exhaust manifold interface can be attributed to the following reasons: Reason 1: Prolonged engine idling; clogged or deformed crankcase ventilation system. Reason 2: Blockage, leakage, or deformation of the turbocharger's oil inlet and return pipes; coking of lubricating oil in the turbocharger's intermediate housing. Reason 3: Cylinder wear leading to piston ring blow-by; excessive flow resistance in the exhaust system. Reason 4: Poor sealing of exhaust valves or aging of oil seals. Reason 5: Engine oil burning. If the car exhibits severe oil burning, it is necessary to check the engine oil dipstick to see if the oil level has decreased. A lower oil level indicates engine oil burning.
3
2
Share

Can You Lock the Car Doors Without Turning Off the Engine?

You cannot lock the car doors without turning off the engine. Even if some car models allow locking the doors without turning off the engine, the engine will automatically shut off after locking, which is a safety consideration. Definition of a Car Engine: A car engine is the device that provides power to the vehicle, serving as the heart of the car. It determines the car's power, fuel efficiency, stability, and environmental performance. Classification of Car Engines: Based on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, which convert the chemical energy of fuel into the mechanical energy of piston movement to output power.
18
5
Share

What Causes Abnormal Engine Noises?

Possible causes of abnormal engine noises include: Engine Mount Deterioration or Loosening: Engine mounts are rubber blocks placed between the engine and the vehicle frame. Their purpose is to reduce vibrations and absorb shocks during engine operation while securing the engine in place. When these mounts deteriorate or become loose, the engine may shake, resulting in abnormal noises. Engine Misfire Noise: An engine misfire occurs when one or more cylinders fail to function properly, often due to issues with the ignition coils. Overly Rich Air-Fuel Mixture: When the air-fuel mixture is too rich, the engine may be difficult to start. After starting, acceleration becomes challenging, and the engine runs unevenly. Black smoke may emit from the exhaust pipe, accompanied by abnormal engine noises or even backfiring. Engine power decreases, and fuel consumption increases. This condition is often related to carbon buildup or a clogged air filter.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.