What are the differences between the Accord 10th Gen 230 and 260?

1 Answers
CoraDella
07/30/25 1:56am
The differences between the 230 and 260 mainly include the following points: 1. Price: The 230 is priced lower than the 260; the 230 has two models, one of which does not meet the China 6 emission standard and only meets the China 5 emission standard. The 260 has four models, all divided into China 5 and China 6 emission standards. 2. Power: The 230 is equipped with a low-power version of the 1.5T inline 4-cylinder turbocharged engine, paired with a CVT continuously variable transmission, with a maximum power of 130KW and a maximum torque of 230Nm. The 260 is equipped with a high-power version of the 1.5T inline 4-cylinder turbocharged engine, paired with a CVT continuously variable transmission, with a maximum power of 143KW and a maximum torque of 260Nm. 3. Configuration: The 230 lacks the following configurations: side airbags, cruise control, rearview camera, electric adjustment for the driver's seat, and electric adjustment for the passenger seat.
Was this review help?
17
3
Share
More Forum Discussions

What is the gear range for gear shifting?

Gear shifting is a mandatory test item in the third subject of the driving test. Upshifting involves gradually increasing from 1st gear up to a maximum of 4th gear, with no need to shift to 5th gear. Downshifting involves reducing from 4th gear to 2nd gear, and skipping gears during downshifting is not allowed. The 100-meter gear shifting test evaluates the driver's proficiency in handling vehicle gears. The vehicle starts from the 100-meter starting line and must complete the acceleration process from the lowest gear to the highest gear within 100 meters, followed by the deceleration process from the highest gear down to 2nd gear. The entire sequence of actions should be smooth. Upshifting procedure: After starting in 1st gear, appropriately press the accelerator to increase speed before upshifting. When the speed reaches 15~20 km/h, shift to 2nd gear. During the shift, release the accelerator pedal, press the clutch pedal, move the gear lever to the neutral position, then release the clutch pedal. Press the clutch pedal again and push the gear lever into 2nd gear, then gradually release the clutch while slowly pressing the accelerator pedal to continue driving smoothly. The same method applies to other upshifts. However, the optimal speed for shifting varies by gear: generally, the best speed for shifting to 2nd gear is 15~20 km/h, to 3rd gear is 35~40 km/h, to 4th gear is 55~60 km/h, and to 5th gear is 75~80 km/h. Downshifting procedure: When downshifting, release the accelerator pedal and press the clutch pedal. Push the gear lever into neutral, then release the clutch pedal. Lightly press the accelerator to increase engine speed (a light press is sufficient, not exceeding 3000 rpm), then press the clutch pedal again and push the gear lever into the lower gear. Gradually release the clutch until the left foot completely releases it, then press the accelerator to control the vehicle speed in the new gear. Downshifting can skip one gear but not two. Downshifting can also be used to decelerate using engine idle speed when going down a long slope.
14
4
Share

What color are the license plates for hybrid vehicles?

Hybrid vehicles have different license plate colors depending on the situation: 1. Range-extended hybrid models use blue plates; 2. Plug-in hybrid models use green plates. Hybrid power refers to the combination of fuel and electric energy, where an electric motor assists the engine in driving the vehicle. During vehicle start-stop, the hybrid system relies on the electric motor, and the engine does not engage until a certain speed is reached. This helps maintain the engine in optimal working conditions, ensuring good performance and low emissions. The powertrain of hybrid electric vehicles consists of: 1. Control system; 2. Drive system; 3. Auxiliary power system and battery.
14
1
Share

How to Use Cruise Control in Emgrand?

To use cruise control in Emgrand: 1. When the speed exceeds 40 km/h, press the ON button on the left side of the steering wheel to activate it; 2. Use the RES and SET buttons to fine-tune the speed for acceleration or deceleration; 3. Press the brake or the OFF button on the left side of the steering wheel to deactivate it. The Geely Emgrand features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine that delivers a maximum horsepower of 109 PS, a maximum power of 80 kW, and a maximum torque of 142 Nm, paired with a 5-speed manual transmission.
15
0
Share

What is the solution for the Cruze P0016 code?

The solution for the Cruze P0016 fault code is as follows: First, check whether the timing belt is broken or has skipped teeth, then inspect and adjust the solenoid valve for valve timing and the engine oil pressure. Below is an introduction to the Cruze: 1. Exterior: The Cruze is a compact family sedan in the A-segment market from Shanghai GM Chevrolet, featuring a dynamic and youthful appearance. It is an important global strategic model for Chevrolet. The Cruze is a compact sedan developed by GM using a global design platform, incorporating advanced technology. 2. Powertrain: Initially, the Cruze was equipped with a 112-horsepower 1.6L DVVT and a 140-horsepower 1.8L DVVT gasoline engine. Thanks to the application of variable valve timing technology, fuel economy and combustion efficiency were improved. The 0-100 km/h acceleration times for these two engines are 12.4 seconds and 9.8 seconds, respectively, demonstrating strong performance. Their combined fuel consumption is 6.7L/100 km and 6.8L/100 km, respectively. Additionally, a 2.0L turbocharged diesel engine model was produced during the same period, delivering 150 horsepower and 320 Nm of torque. In terms of transmission, the Cruze is equipped with a five-speed manual transmission and a six-speed automatic transmission with manual mode, marking the first time GM's six-speed automatic transmission was used in a compact car.
12
1
Share

What is the transmission model of the Volkswagen Tayron?

The transmission model of the Volkswagen Tayron is DQ500. The functions of the transmission are: 1. To change the transmission ratio to meet the traction needs under different driving conditions; 2. To achieve reverse driving; 3. To interrupt power transmission to the drive wheels when the engine starts, idles, the car shifts gears, or needs to stop for power output. Taking the 2020 two-wheel-drive Comfort Smart Edition Volkswagen Tayron as an example, its body dimensions are: 4589mm in length, 1860mm in width, 1660mm in height, with a wheelbase of 2731mm, a fuel tank capacity of 60 liters, and a trunk capacity of 1590 liters.
11
5
Share

What to Do When the Engine Light Comes On?

When the car's engine light comes on, it usually indicates an issue with the engine's front oxygen sensor. This problem often arises when the owner fails to change the engine oil regularly or does not clean the coolant impurities inside the engine in time, leading to oxygen sensor failure. If the oxygen sensor malfunctions, fuel consumption is likely to increase significantly. Additionally, if the thermostat is abnormal, the engine fault light will also illuminate. Typically, failure to replace the coolant within the specified mileage or lack of radiator function in the engine coolant tank can cause the thermostat to rust or even break down. In such cases, it is usually sufficient to visit a repair shop for a computer diagnosis and replace the faulty part if necessary.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.