What are the differences between the 5-seater and 7-seater Wuling Zhiguang?

3 Answers
SamuelAnn
07/28/25 7:49pm
The differences between the 5-seater and 7-seater Wuling Zhiguang: 1. The price of the 5-seater version is cheaper than the 7-seater. 2. The trunk space of the 5-seater version is larger than the 7-seater. 3. The 5-seater cannot be dismantled; the 7-seater can. Below is an introduction to the Wuling Zhiguang: 1. The Wuling Zhiguang is a micro van under the Wuling brand. 2. This model is equipped with a 1.2-liter naturally aspirated engine across all variants. 3. The 1.2-liter naturally aspirated engine of the Wuling Zhiguang delivers 76 horsepower and a maximum torque of 108 Nm. The engine's maximum torque is achieved at 3600 to 4200 rpm, and the maximum power is reached at 5600 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission. 4. The front suspension of the Wuling Zhiguang uses a MacPherson independent suspension, while the rear suspension employs a longitudinal leaf spring suspension.
Was this review help?
14
4
Share
LaDominic
08/11/25 11:37pm
I was choosing between Wuling models recently and finally picked the 5-seater version for its simple, hassle-free layout: standard five-seat configuration with a spacious middle row that comfortably fits five people plus some luggage. The 7-seater adds two small third-row seats to squeeze in seven passengers, but the rear is quite cramped – tall passengers can't stretch their legs, making long trips tiring for adults (though okay for kids). While the 7-seater's foldable rear seats improve cargo space utilization, they actually reduce flexible storage compared to the 5-seater when folded. Additionally, 7-seaters may require one extra annual inspection in some regions with stricter rules, though fuel consumption is similar. The 7-seater works for occasional group transport, but the 5-seater is more practical for small families with easier maintenance. Both share similar dimensions/weight, so parking isn't a concern – just consider whether you'll regularly need passenger or cargo space.
Was this review help?
6
4
Share
Expand All
ZoeyRose
09/30/25 6:13am
From an economic perspective, the core difference between the 5-seater and 7-seater Wuling Guang lies in the number of seats. The 7-seater is slightly more expensive, but the extra two seats make it more cost-effective when carrying more passengers. For daily use, the 5-seater offers sufficient space and is burden-free for cargo transport. As for the 7-seater, the third row can be folded, making it especially practical for carrying two additional passengers or when there are more guests, such as earning extra fares through ride-sharing. Fuel consumption doesn’t vary much under normal conditions, but when fully loaded with seven passengers, the engine works harder and consumes more fuel. Overall, the 7-seater offers better value for money, particularly for frequent short-distance transport or large family trips, though comfort is somewhat compromised with narrower rear seats and a more compact design that makes entry and exit less convenient. Additionally, insurance and taxes might increase slightly, but in the long run, the return on investment is strong. It ultimately depends on whether you prioritize cost savings or versatility.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

Is the Accelerator Used in Subject 2?

Subject 2 of the driving test does not require the use of the accelerator. Below are specific techniques for Subject 2 of the driving test: 1. Slow speed: Maintaining a slow speed is the most fundamental rule for practicing Subject 2. Ensure the vehicle doesn't stop while keeping the speed as slow as possible—the slower, the better. A slow speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, always adjust the rearview mirrors properly, which is particularly important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to accurately locate these points and observe carefully to ensure precision. 4. Pay attention to the four corners of the car: The front corner during reverse parking can easily graze the outer line; the rear corner can easily graze the side lines of the parking space; the front corner during curve driving can easily cross the line; the front corner during a right-angle turn can easily cross the line; the front corner during parallel parking can easily graze the outer line or the left front corner of the parking space, while the right rear corner can easily graze the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.
19
5
Share

How to Adjust the Driver's Seat to the Optimal Position?

Car seats generally have three adjustment methods: height adjustment, front-rear adjustment, and backrest adjustment. Extended information is as follows: 1. Height adjustment: This refers to the driver adjusting the seat height based on their own height and arm length. Everyone's driving habits and height are different, so the seat should be adjusted to the most comfortable position. First, depending on height, there should be at least a fist's distance between the head and the car roof. If the seat is adjusted too high, bumps during driving may cause the head to hit the roof. Secondly, the driver's visibility should be considered. The driver's line of sight should fall on the middle position of the front windshield, which is the optimal driving view. 2. Front-rear adjustment: This refers to the distance between the seat and the car pedals. Considering the driver's height, if the seat is too far from the pedals, the feet may not reach them, affecting the accuracy and force when stepping on the pedals. Therefore, the front-rear position of the seat must be adjusted to the most suitable distance. 3. Backrest adjustment: This refers to the inclination of the seat backrest. Generally, the more inclined the seat, the more comfortable it feels. However, excessive inclination can affect car control, so it should be adjusted to a suitable inclination to maintain the best driving condition.
19
0
Share

What Does Incorrect Use of Brake and Accelerator Pedals Mean?

Incorrect use of brake and accelerator pedals refers to not stepping on the brake when deceleration is required or mistakenly stepping on the accelerator, or not stepping on the accelerator when acceleration is needed or mistakenly stepping on the brake. Incorrect use of brake and accelerator pedals results in an immediate deduction of 100 points, leading to a direct failure. Additional information is as follows: 1. Starting in Subject 3: Upon hearing the voice prompt 'Please start,' depress the clutch, shift into first gear, turn on the left turn signal (for more than 3 seconds), simultaneously (turn head left) observe the left rearview mirror, confirm safety, sound the horn, release the parking brake, start smoothly, and straighten the turn signal. 2. Examination Conditions: According to Article 44 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' each subject is examined once. If the examination is failed, a retake is allowed once. If the retake is not attended or still results in failure, the examination is terminated, and the applicant must reschedule the examination. However, Subject 2 and Subject 3 examinations must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid.
5
1
Share

Should You Release the Handbrake or Shift to First Gear First in Subject Two?

In Subject Two, you should shift to gear before releasing the handbrake. This is because the road surface when the vehicle is parked is not completely flat and may have a slope. If you release the handbrake before shifting to gear, the vehicle may roll backward. Below are the relevant details: 1. Starting Gear Control: Whenever the vehicle moves from a stationary position, the gear should remain in first. 2. Sequential Gear Shifting: Skipping gears during the Subject Two test is strictly prohibited. Gear changes must be sequential, such as from first to second gear or second to third gear. Otherwise, the test recorder will log it and deduct corresponding points. If you mistakenly shift to the wrong gear, immediately return the gear to the correct position and shift again. 3. Stable Gear Shifting: When shifting gears, the clutch must be fully depressed, and gear changes should only occur within a certain speed range. 4. Driving Speed: Master the key points of steering and turn at the right time. Control the driving route well—the vehicle's path mainly depends on the speed of steering wheel rotation and driving speed. When reversing, accurately observe the side lines and promptly adjust the direction to ensure the vehicle enters the garage straight.
7
3
Share

How many days of study are required before taking the Subject 2 test?

Subject 2 generally requires 12-22 days of study before taking the test. In driving schools, for C1/C2 driver's license training, the theoretical study time for Subject 2 must reach 2 hours, and the practical training time must reach 22 hours before the test can be taken. Below is relevant information about Subject 2: 1. Test content: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment, referred to as the field driving skill test. The test items for C1/C2 vehicles include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. 2. Test objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently master the basic methods of field and on-site road driving, possess the ability to reasonably use vehicle operating components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
7
2
Share

What Causes Low-Speed Vehicle Body Shaking?

Low-speed vehicle body shaking is primarily caused by the accumulation of carbon deposits in areas such as the throttle body, intake tract, and valves. When the engine is cold, these deposits absorb some gasoline. As the engine warms up, the gasoline evaporates, leading to an overly rich air-fuel mixture during idle, which results in low-speed shaking. Throttle maintenance methods: 1. Release gases: Engine oil volatilizes under heat during use. The longer the usage period and the higher the temperature, the stronger the volatilization. Additionally, some compressed gas from the cylinder will inevitably squeeze into the crankcase through the piston ring gaps. Therefore, there must be a passage to release these gases; otherwise, the oil pan will develop positive pressure. 2. Negative pressure extraction: The reason the crankcase ventilation tube connects to the throttle body is partly due to environmental requirements and partly to utilize the intake's negative pressure to extract gases from the crankcase. When oil vapor reaches the intake pipe, it cools down, causing the oil to condense on the intake tract and throttle body. The carbon deposits mixed in the vapor will also deposit in these areas. Since the throttle opening has the highest airflow rate, a small space, and lower gas temperature, this part is most prone to condensation.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.