What are the differences between the 5-seater and 7-seater Ford Edge?

Can You Drive with a T-Box Malfunction?

T-Box malfunction refers to issues with the in-vehicle T-BOX in the telematics system, requiring a visit to the 4S store to check the fault code, which will then determine the fault information. Most problems typically occur with the radar probe, making it impossible to retrieve vehicle information. Below is relevant information: 1. Structure of the T-Box: The T-Box structure includes an STM32F103CBT6 main control and a dual-core STM32F105RBT6 processor. Additionally, GPRS, GPS, a six-axis G-Sensor, and a vibration sensor are called upon by the main control, along with two 12V outputs. The in-vehicle T-BOX communicates with the host via CAN bus, enabling the transmission of commands and information, including vehicle status information and control commands, among others. 2. Functions of the T-Box: The T-Box has a wide variety of functions, the most common being remote query, remote control, and security services.

2

3

Share

Will the Engine Get Waterlogged in the Rain?

Rain will not cause water to enter the engine. This is because the engine's air intake passes through the air filter, which is located in the engine compartment and protected by the hood, preventing water from entering. However, water can enter if the hood is left open or the air filter is removed during rain. Water entering the engine can cause it to stall. If the engine continues to operate, water may reach the spark plugs, leading to stalling. Restarting the engine under such conditions can result in valve damage, and in severe cases, the engine may be irreparably damaged. Additional Information: 1. Water Wading Insurance: Also known as engine-specific loss insurance, this is a derivative of vehicle damage insurance. It is an additional coverage that owners can purchase specifically for engine protection. It provides compensation for engine damage caused by driving through waterlogged roads or flooding. 2. Scope of Application: The insurance covers situations where the insured vehicle is submerged up to the exhaust pipe or intake manifold due to heavy rain or flooding, and the driver attempts to restart the vehicle or uses inertia to start it. It also covers instances where the vehicle is started without necessary post-flooding procedures after exposure to heavy rain or flooding.

2

5

Share

What is the tire inflation warning?

Prompting tire inflation means the tire pressure warning is activated, indicating that one or more tires have insufficient air pressure. Underinflated tires can lead to abnormal wear, shorten tire lifespan, increase fuel consumption, and even raise the risk of a blowout. The standard tire pressure is approximately 2.2 to 2.5 bar. The maintenance methods for car tires are as follows: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should not be too high or too low. Inflate according to the vehicle's recommended tire pressure. In summer, try to keep the pressure slightly lower, while in winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. 2. Frequently inspect tire wear: Some vehicles may experience uneven tire wear ("tire cupping"), so regularly check tires, especially the inner side, for abnormal wear. Pay attention to whether the tread depth on both sides is consistent. 3. Promptly remove small stones and other debris from tires: Debris in tire treads poses potential hazards and can fly out while driving. Use a key or similar tool to remove small stones and keep tires clean. 4. Rotate tires on schedule: Front tires, being steering tires, wear more quickly. To reduce front tire wear, perform a four-tire rotation every 5,000 kilometers after the first maintenance, preferably using the diagonal rotation method.

3

1

Share

What are the common malfunction indicator lights in Buick vehicles?

Buick's malfunction indicator light (MIL) illuminates when the ignition is turned on, indicating that it is operational. If the light remains on while the engine is running, it signifies an abnormality in the emission control system. In addition to the MIL, there are numerous warning and indicator lights. The exclamation mark on the dashboard can appear in three different scenarios: 1. An exclamation mark inside a circled parenthesis: This indicates brake pad wear or insufficient brake fluid. The solution is to release the parking brake and check if the brake fluid level is low. If the light persists, visit a repair shop to replace the brake pads. 2. An exclamation mark inside a triangle: This signals a malfunction in the exterior lights. The solution is to inspect the lights for any faults. If no issues are found but the light remains on, it is advisable to seek professional repair. 3. An exclamation mark inside yellow parentheses: This indicates a problem with the tire pressure in one of the tires. The solution is to check if the tire is punctured or leaking air. If not, drive at a low speed and locate an auto repair shop, car care center, or roadside car wash, as these places typically have air pumps to inflate the tire. After inflating, observe the dashboard. If the warning light does not turn off, access the settings via the vehicle's central console to recheck the tire pressure. Once the pressure is confirmed to be normal, the light should extinguish.

8

2

Share

What are the requirements for using a second-hand car for Didi?

To use a second-hand car for Didi, the vehicle age generally needs to be within 6 years to join, and the mileage should be under 100,000 kilometers. Other requirements for joining Didi include: 1. Age between 22-55 for males and 22-50 for females. 2. Possession of a C1 or higher driver's license with a driving experience of at least three years. 3. Ownership of a locally registered car. Below are the specific requirements for second-hand car models for Didi: 1. Didi Express category second-hand cars: Audi A1, A3, S3, TT; Mercedes-Benz A-Class, B-Class, SLK-Class; BMW 1 Series, 2 Series, Z4, i3; Buick Excelle, Verano, Envision, etc. 2. Didi Premier category second-hand cars: Buick Envision, LaCrosse, Regal; Cadillac ATS; Chevrolet Captiva, Malibu; Citroën DS5LS, DS6, C5; Dodge Journey; Fiat Freemont, etc. 3. Didi Luxury Premier category second-hand cars: Audi A6L, Audi A6 (imported), Audi A8L; BMW 5 Series, BMW 5 Series (imported), BMW 7 Series; Mercedes-Benz E-Class, V-Class, Vito, S-Class; Tesla Model S, Tesla Model X, etc.

11

5

Share

What does a car brake repair station mean?

A brake repair station is a place where the braking system has malfunctioned and needs to be towed for inspection and repair. It is a professional facility for servicing brakes. Here is a detailed introduction about car brakes: Overview: Car brakes are the braking devices of a vehicle. Most brakes used in cars are friction-based and can be divided into two main types: drum brakes and disc brakes. In drum brakes, the rotating element of the friction pair is the brake drum, with its working surface being cylindrical. In disc brakes, the rotating element is the brake disc, with its working surface being the end face. Other: Car brakes refer to components that generate forces (braking forces) to resist vehicle movement or the tendency to move, including devices in auxiliary braking systems. Check for issues in the braking system, such as severely worn brake pads, brake discs worn to their limits, insufficient brake fluid, or whether the clearance between the brake pads and brake discs is too large or too small. When parking, pay attention to the following: When applying the parking brake, press the brake pedal and pull up the parking brake lever. To release the parking brake, press the brake pedal, slightly pull up the parking brake lever, press the button at the end of the handle with your thumb, and then lower the parking brake lever to its original position. When parking on an incline, if you shift to P position before applying the parking brake, the weight of the vehicle may make it difficult to shift out of P position when preparing to start the car. Before releasing the parking brake when preparing to start the car, shift the gear lever from P position to P position. Do not engage the parking brake tightly when starting the car, as this may reduce the braking effectiveness of the rear wheels, shorten the lifespan of the brakes, or cause permanent damage due to overheating.

19

2

Share

What are the differences between the 5-seater and 7-seater Ford Edge?

Can You Drive with a T-Box Malfunction?

Will the Engine Get Waterlogged in the Rain?

What is the tire inflation warning?

What are the common malfunction indicator lights in Buick vehicles?

What are the requirements for using a second-hand car for Didi?

What does a car brake repair station mean?

Is It Serious If the Low Beam Was Left On All Night?

Can Color Change Film Be Waxed?

Why does the Audi Q5 stall while driving?

What is the cause of the P0014 trouble code?