What are the differences between the 2021 RAV4 and the 2020 model?

1 Answers
OArya
07/29/25 8:18pm
Here are the differences between the 2020 RAV4 and the 2021 RAV4: Different safety configurations: The 2020 RAV4 is only equipped with a tire pressure warning system, which cannot display specific values. When the tire pressure is too low, the system only alerts the driver with a warning light. In contrast, the 2021 RAV4 is equipped with a tire pressure display, which can continuously monitor the tire pressure values and directly indicate which tire has an issue when abnormal pressure is detected. Different multimedia devices: The 2021 RAV4 adds a GPS navigation system, navigation traffic information display, and a voice recognition control system. Additionally, the multimedia system supports car networking functionality, making the vehicle's infotainment system more intelligent.
Was this review help?
16
2
Share
More Forum Discussions

How to achieve one-touch window lift for Changan Eado DT?

When using the Changan-specific KT series diagnostic tool to set up the remote window lift for the Changan Eado, the operation method is as follows: 1. Remote window lift: 1. Enter the Changan Eado Jicheng BCM (C201) security operation vehicle configuration manual configuration logic function configuration remote window lift mode configuration from the diagnostic tool. 2. In the "Remote Window Lift Mode Configuration," select "Manual." After execution, press and hold the "LOCK" button on the remote key for 2 seconds to complete the setup. 2. Remote window drop: 1. Enter the Changan Eado Jicheng BCM (C201) security operation vehicle configuration manual configuration logic function configuration remote window drop mode configuration from the diagnostic tool. 2. In the "Remote Window Drop Mode Configuration," select "Manual." After execution, press and hold the "UNLOCK" button on the remote key for 2 seconds to complete the setup. Note: To enter the security operation, you need to input a security code, which can be obtained from Changan after-sales service department.
13
4
Share

How Many Turns to Fully Lock the Steering Wheel?

Generally, a car's steering wheel requires two to two and a half turns to fully lock. Turning the steering wheel fully to the right means turning it one and a half turns clockwise, while turning it fully to the left means turning it one and a half turns counterclockwise. This mechanism is used in cars and other vehicles to allow significant directional changes with relatively small steering inputs. Below are some precautions when operating a steering wheel: 1. When shifting gears or operating other controls with your right hand, always keep your left hand firmly on the steering wheel to prevent veering off course. 2. Avoid turning the steering wheel while the vehicle is stationary, also known as 'dry steering.' When the wheels aren't rolling, the friction between the tires and the ground is much higher, placing greater stress on the steering components. Dry steering can not only damage the steering mechanism but also cause severe tire wear. 3. After parking, ensure not only that the vehicle is aligned straight but also that the front wheels are straightened. Especially when the engine is still running, straighten the front wheels within 10 seconds. This practice effectively protects the power steering system, relieves stress on the connecting components of the steering mechanism, and extends its service life.
15
2
Share

How Many Years is the General Lifespan of an Electric Vehicle?

Electric vehicle battery lifespan varies depending on the type of battery used. Nickel-cadmium batteries typically have a shelf life of 2 to 3 years, standard lead-acid batteries generally last 3 to 5 years, while the most commonly used lithium-ion batteries can endure up to 5 to 8 years. The lifespan of an electric vehicle is directly determined by its battery life. Typically, an electric vehicle battery can be charged 300 to 500 times, with service life ranging from 3 to 5 years depending on the battery type. The longevity of an electric vehicle depends partly on the quality of the motor, but more importantly on the condition of the battery. Electric vehicles are well-developed, pollution-free, and environmentally friendly. To extend battery life, it is advisable to charge the battery as needed and perform regular maintenance. Methods to prolong the lifespan of an electric vehicle: In daily use, avoid depleting the battery excessively, especially below 20% charge; charge more frequently to prevent excessive battery drain in a single session; adopt good driving habits by avoiding prolonged rapid acceleration and driving as smoothly as possible, as heavy throttle use can rapidly deplete battery power; avoid parking the vehicle in exposed areas subject to wind, rain, or direct sunlight—if possible, park in a basement or shaded area; reduce the maximum charge limit (i.e., lower the upper threshold for battery charging).
19
2
Share

Can the vehicle still be checked on 12123 after the transfer of ownership?

After the transfer of ownership, the vehicle cannot be checked on 12123. The following is the specific process for vehicle transfer: 1. Submit a relocation application: Go to the vehicle management office to submit an application for relocation, obtain a tracing number card and wait for tracing, and specify that it is for relocation or transfer. 2. Submit the required documents: Go to the corresponding window to submit the relocation authorization letter, 'Motor Vehicle Transfer Application Form', vehicle license, vehicle plate, and other documents required by the local vehicle management office, then pay the corresponding fees and receive a receipt. 3. Collect the vehicle file: After 3 working days of submitting the plate, bring the receipt to the main office of the vehicle management office to collect the vehicle file, which includes the 'Motor Vehicle Transfer Application Form', vehicle inspection form, chassis number, vehicle license, and vehicle photos. 4. Surrender the original plate and license: For vehicles that pass the inspection, the original plate and license will be surrendered, and the change registration column in the license and 'Motor Vehicle Registration Application Form' will be noted with 'Transferred to the Vehicle Management Office of the Public Security Department (Bureau) of a certain province and location', stamped with the issuing authority's seal, and placed in the file along with the 'Motor Vehicle Transfer Notice', then handed over to the owner.
18
0
Share

How to open the fuel tank cap of the Infiniti QX50?

The method to open the fuel tank cap of the Infiniti QX50 is as follows: 1. The fuel tank switch of the Infiniti QX50 is externally operated. With the vehicle's central locking system unlocked, simply press the fuel tank cap to open the outer cover. 2. The inner cap is a twist-type rubber plug. Turn it counterclockwise to open, and after opening, you can place the inner cap on the designated spot inside the outer cap. If the fuel tank cap cannot be opened, you can proceed from the trunk. The specific steps are as follows: 1. First, remove the trunk lining covering the fuel tank. The lining is usually secured by plastic clips and can be easily pried open with a screwdriver. 2. After removing the lining, you will see the locking mechanism of the fuel tank cap and the cable for remote operation. Simply pull the cable to open the fuel tank cap. 3. If this does not work, press the movable part of the locking mechanism while continuously pulling the cable, and the fuel tank cap will open easily. 4. Some models have a dedicated switch on the locking mechanism. Pressing this switch will open the fuel tank cap.
2
5
Share

Difference between Mobil 1 Extended Performance and Mobil 1?

Mobil 1 is actually the same as Mobil 1, their main difference lies in the viscosity. The manufacturer separates the packaging to help consumers distinguish between them. Mobil 1 is an outstanding full synthetic high-performance oil that can operate under the world's most demanding driving conditions and effectively protect the engine. Below is an introduction to motor oil classifications: 1. Mineral oil: Mineral oil is a commonly used lubricant on the market. It is derived from the useful substances separated during the petroleum refining process, such as gasoline and aviation fuel, and then the remaining base oil is further processed and extracted. 2. Semi-synthetic oil: Semi-synthetic oil uses semi-synthetic base oil, which is a product purified from mineral oil through hydrocracking technology. It is a mixture of mineral oil and full synthetic oil in a ratio of 4:6. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil. 3. Full synthetic oil: Full synthetic oil is a high-grade oil among motor oils. It is derived from ethylene and propylene dispersed from natural gas or gas in crude oil, and then undergoes complex chemical reactions such as polymerization and catalysis to form a lubricating fluid composed of large molecules.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.