What are the differences between the 2020 and 2021 Tesla models?

How Long is the Transmission Warranty for Geely Emgrand?

Geely Emgrand's full vehicle warranty is four years or 100,000 kilometers. The vehicle is equipped with a 1.5L naturally aspirated engine, with a length of 4632 millimeters, a width of 1789 millimeters, and a height of 1470 millimeters. The transmission options include a 5-speed manual transmission and a CVT continuously variable transmission. Replacement Cycle: For manual transmissions, the transmission fluid is generally replaced every 60,000 kilometers. The amount of transmission fluid replaced depends on the vehicle model and the replacement method. Typically, when replacing automatic transmission fluid, the screw at the bottom of the transmission is removed to drain the old fluid before adding new fluid, which only replaces about 70% of the old fluid. Classification: Transmissions are divided into manual and automatic transmissions due to their different designs. Each transmission design has specific technical requirements, and even the same transmission model configured in different vehicle models will have its own designated original manufacturer's specialized transmission fluid.

7

0

Share

How Many Battery Groups Does the Jetta Have?

Jetta has only one battery. The steps to test the condition of the battery are as follows: 1. Inspect the battery exterior: Check if the battery casing is bulging, leaking, has broken partitions, or corroded terminals. If any of these signs are present, it indicates the battery is dead and needs replacement. 2. Test the battery voltage: After charging for two hours, measure the voltage of each battery cell every 20 minutes. If the voltage is below 13, it indicates a problem with the battery. During discharge, test every 10 minutes in three intervals. If the discharge time is faster than other batteries and the voltage drops below 10V, the battery is faulty. 3. Check for "dehydration" and blackening: After charging the battery for 3-6 hours, if the charger's red light remains on, it indicates severe "dehydration." Open the battery's top cover to reveal six round holes. Inspect the color of the electrolyte in each hole. If it appears black, it means the lead powder from the plates has detached, indicating the battery is dead.

8

3

Share

What to Do When the Vehicle Inspection Expires?

After the vehicle inspection expires, the first thing to do is to stop driving the vehicle on the road and proceed with the annual inspection as soon as possible. For vehicles that have exceeded the inspection period by less than a year, there will be no penalties when handling the inspection procedures at the vehicle management department. Here are the documents required for the annual inspection: 1. Original Vehicle License. Only the original vehicle license can confirm the vehicle's information, and the supplementary page of the license includes an inspection record section, which clearly shows details such as whether the inspection has been completed and the inspection date. The staff at the vehicle management office will verify all this information to ensure accuracy. 2. Valid original copy of the current year's Compulsory Traffic Accident Liability Insurance policy. The insurance policy must be for the current year and still within the validity period. The traffic management department will keep the original copy.

4

Share

Which brand is the Emgrand CVT transmission?

The brand of the Emgrand CVT transmission is Punch. Punch Powertrain (abbreviated as Punch) is headquartered in Sint-Truiden, Belgium, and is a supplier of energy-efficient powertrain systems. With over 50 years of experience in the design and production of continuously variable transmissions (CVT), it also specializes in the development, production, and supply of components for hybrid vehicles (48V and plug-in hybrid PHEV) and dual-clutch transmissions (DCT). The Emgrand CVT automatic transmission utilizes a continuously variable transmission (CVT). Unlike traditional transmissions with fixed gears, a CVT operates similarly to an automatic transmission but provides a seamless and continuous change in gear ratios, ensuring smooth and uninterrupted power delivery. When using the Emgrand transmission in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Prolonged neglect of fluid changes can damage internal components such as bearings and the transmission housing. Avoid prolonged coasting in neutral. While some experienced drivers may coast in neutral with manual transmissions, doing so in an automatic transmission can cause overheating and potential jolts when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers attempt to shift gears prematurely to demonstrate smooth operation, but this can severely damage the transmission gears, leading to issues like gear grinding over time. Avoid frequently climbing steep slopes in Drive (D) mode. Automatic transmissions may overheat or struggle with steep inclines due to high loads or premature upshifting. In such cases, use manual mode to lock in lower gears or switch to Sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Avoid using tow ropes or dragging the vehicle directly, as this can damage the transmission.

7

1

Share

What are the reasons for high fuel consumption in the Kia Forte?

The high fuel consumption in the Kia Forte is related to many factors, such as road conditions, driving habits, the break-in period for new cars, and vehicle load. Additionally, hardware components that can affect increased fuel consumption include tires, spark plugs, throttle carbon deposits, the catalytic converter, and oxygen sensors. It is recommended to focus on checking tire wear and pressure, as well as cleaning the fuel injectors and throttle body. More information on fuel consumption is as follows: 1. Fuel consumption is related to engine displacement: The larger the engine displacement, the higher the fuel consumption. 2. Fuel consumption is related to road conditions: When a car starts from a standstill, it requires significant acceleration, and the engine needs to output a lot of power. If the car frequently starts from a standstill, its fuel consumption will be relatively high. When driving on congested roads, the car's engine spends some time in idle mode. During idle mode, the car's mileage does not increase, but the engine continues to consume fuel, leading to higher fuel consumption per 100 kilometers. 3. Fuel consumption is related to driving habits: Individual driving habits have a significant impact on fuel consumption. When driving, it is essential to maintain a steady speed as much as possible and avoid unnecessary overtaking to achieve the most fuel-efficient performance. 4. Tire pressure: If tire pressure is below the standard level, the contact area of the tires increases, leading to more friction. This not only causes wear on both shoulders of the tires but also increases fuel consumption. 5. Oil quality: Using low-quality oil can result in unsaturated hydrocarbons and colloidal impurities forming carbon deposits under high temperatures. These deposits roughen the intake pipe walls, affecting air intake and the quality of the air-fuel mixture, leading to a sharp rise in fuel consumption. 6. Brake system or axle faults: Issues that affect wheel rotation can also increase fuel consumption. A faulty thermostat or temperature control switch can lower the coolant temperature, increasing fuel consumption. Worn-out spark plugs reduce ignition energy, slowing down acceleration and significantly increasing gasoline consumption. The oxygen sensor, as an internal control unit, if damaged, can affect the air-fuel mixture ratio, thereby increasing fuel consumption.

8

2

Share

What brand is the ZF transmission?

ZF's Chinese name is ZF Friedrichshafen AG, which is one of the world's top three transmission suppliers. The world's top three transmission suppliers are ZF, Getrag, and Aisin. Transmissions manufactured by ZF are commonly found in some Japanese and German cars. The AT transmissions produced by this company perform exceptionally well, with ZF's AT transmissions boasting rapid shifting speeds that can even rival dual-clutch transmissions. Here is some relevant information about transmissions: 1. AT transmissions are the most technologically mature, widely used, and offer the best reliability and stability among transmissions. This type of transmission includes a torque converter, with planetary gears and numerous clutch plates inside. 2. CVT transmissions are frequently seen in some relatively inexpensive family cars and Japanese vehicles. These transmissions provide smooth shifting without any jerking. They feature a simple structure, compact size, and light weight, and their manufacturing costs are also quite low. 3. ZF transmissions are commonly found in some BMW models, and these transmissions can be said to be a perfect match for BMW engines.

6

4

Share

What are the differences between the 2020 and 2021 Tesla models?

How Long is the Transmission Warranty for Geely Emgrand?

How Many Battery Groups Does the Jetta Have?

What to Do When the Vehicle Inspection Expires?

Which brand is the Emgrand CVT transmission?

What are the reasons for high fuel consumption in the Kia Forte?

What brand is the ZF transmission?

What brand is the Ninja motorcycle?

What is the oil capacity for BMW X1?

What is the size of the Vios tire bolts?

Where is the vehicle model number?