What are the differences between the 2020 and 2021 T-Cross models?

2 Answers
McNoah
07/24/25 8:25pm
The differences between the 2020 and 2021 T-Cross models are: 1. Different maximum horsepower: the 2020 T-Cross has a maximum horsepower of 113ps; the 2021 T-Cross has a maximum horsepower of 150ps. 2. Different maximum torque: the 2020 T-Cross has a maximum torque of 145nm; the 2021 T-Cross has a maximum torque of 250nm. Taking the 2021 T-Cross as an example, it is a compact SUV with a body length, width, and height of 4218mm, 1760mm, and 1599mm respectively, a wheelbase of 2651mm, and a fuel tank capacity of 42.5l. The 2021 T-Cross is equipped with a 1.5l naturally aspirated engine, paired with a 5-speed manual transmission.
Was this review help?
1
2
Share
LeLouis
08/11/25 11:07am
I've been driving the 2020 T-Cross for almost a year and just tried the 2021 model, noticing significant differences. The 2021 version features an upgraded 9.2-inch infotainment screen with a clearer interface and much faster response. Operating music or navigation no longer requires poking the screen hard, and it supports wireless CarPlay and Android Auto, allowing direct phone connection for music playback while driving—no need for a data cable. Externally, the 2021 model adds glossy chrome trim to the front bumper and sports a more dynamic wheel design, giving it a more stylish overall look. On the safety front, it includes new blind-spot monitoring and automatic high-beam assist, making highway driving more reassuring. The interior materials are also softer, and the seats offer optional massage functions for comfort on long trips. While the 2020 model performs well, these small upgrades in the 2021 version are quite practical, especially appealing to younger drivers. It's advisable to test drive both models before making a choice—the differences are quite noticeable.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What should the tire pressure be for Maxus V90?

It is recommended to maintain a tire pressure of 230 kPa (2.3 bar). In addition to the clear instructions in the manual, owners can also find the tire pressure standard on the vehicle's label. The tire pressure label is usually located at the bottom of the B-pillar when the door is opened or inside the fuel tank cap. Maintaining tire pressure within the appropriate range: Air pressure is the lifeline of tires. Both too high and too low pressure will shorten the tire's service life. For safe driving, tire pressure needs to be maintained within the appropriate range. Tire pressure for different types of tires: For standard tires, the pressure should be within the range of 2.4–2.5 bar, while for reinforced tires, the pressure should be within the range of 2.8–2.8 bar.
1
2
Share

What tires are best for the Elantra?

The Elantra comes factory-equipped with NEXEN tires. Different trim levels use tire sizes of 225/45-R17 and 205/55-R16 respectively. Below is relevant information about the Elantra: 1. Taking the 2020 Elantra Manual Zhixuan Vitality trim as an example, its body dimensions are: length 4610mm, width 1800mm, height 1450mm, wheelbase 2700mm, with a fuel tank capacity of 53 liters. 2. The 2020 Elantra Manual Zhixuan Vitality trim is powered by a 1.5L naturally aspirated engine producing maximum power of 84kW at 6300rpm, and maximum torque of 143.9Nm at 4500rpm.
2
1
Share

How to Turn Off All Lights on a Camry?

The automatic headlights on the Camry do not require manual operation; simply set the switch to the AUTO position. The light sensor will automatically detect and turn the headlights on or off. When adjusted to AUTO mode, the headlights will automatically illuminate when the ambient light dims during driving and turn off when the light brightens. The full name of this feature is Automatic Light-Sensing Headlights. In higher-end models, an additional AUTO switch is added to the existing headlight controls, allowing the headlights to automatically activate or deactivate based on external light conditions.
13
4
Share

How often should the spark plugs of a Toyota Highlander be replaced?

Normally, the service life of the spark plugs for a Toyota Highlander does not exceed 30,000 kilometers. Additionally, you can determine whether an early replacement is needed based on the symptoms of spark plug failure. Below are some important considerations when replacing the spark plugs for a Toyota Highlander: 1. Before starting the replacement, ensure the vehicle is turned off and cooled down for a certain period. 2. Pay attention to cleanliness during the entire operation. Be sure to wipe away dust and oil around the ignition coils, as any entry into the combustion chamber can cause serious adverse effects. It is advisable to wear gloves during the operation. 3. When tightening all screws, apply even force and move straight up and down to avoid cracking the threads. 4. After installation, check the ignition coil wiring and test the engine by starting it.
18
2
Share

Where is the location to add antifreeze in a Mercedes-Benz?

In a Mercedes-Benz, the antifreeze is added on the left side of the engine compartment, behind the headlight. The steps to add antifreeze are as follows: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze. 2. Insert a rubber hose connected to a tap into the radiator filler port and turn on the tap. 3. Once the cooling system is completely drained, close the radiator drain valve. 4. Replace the radiator cap and the reservoir cap, and tighten them. Precautions for using antifreeze are as follows: 1. Mixing antifreeze with water can damage the engine. 2. Avoid mixing different types of antifreeze together. 3. Remember to check the antifreeze regularly.
11
5
Share

How to Turn on the Daytime Running Lights for Trumpchi GS5?

The daytime running lights can be activated by turning on the parking lights, which are typically used at night. To achieve independent control of the daytime running lights, you can modify the wiring of the daytime running lights from the fuse box (such as the cigarette lighter) to a power supply mode that activates after the engine starts, thereby solving this issue. Below is some information about daytime running lights: 1. They are lights that make the vehicle more easily recognizable during daytime driving. 2. Their purpose is not to help the driver see the road but to inform others that a vehicle is approaching. 3. These lights are not illumination lights but signal lights. Installing daytime running lights can make the car look cooler, but their primary function is not aesthetics but rather enhancing the vehicle's visibility.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.