What are the differences between the 2019 Magotan Leading and Luxury models?

1 Answers
OColton
07/30/25 12:01am
2019 Magotan Leading and Luxury models differences: 1. Different body dimensions: The 2019 Magotan Leading measures 4855mm in length, 1832mm in width, and 1464mm in height; the Luxury model measures 4933mm in length, 1836mm in width, and 1469mm in height. 2. Different configurations: The 2019 Magotan Leading is equipped with rear side airbags and knee airbags; the Luxury model features fatigue driving reminder and rearview camera. The Magotan is a mid-size sedan under the Volkswagen brand, which has gained popularity among many consumers since its launch. The 2019 Magotan is equipped with three types of engines: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. All three engines are paired with a 7-speed dual-clutch transmission.
Was this review help?
13
2
Share
More Forum Discussions

What is the difference between DOHC and DVVT?

The differences between DOHC and DVVT are as follows: 1. In terms of components: DOHC has two overhead camshafts placed on the cylinder block, one acting to drive the intake valves and the other to drive the exhaust valves. DVVT, on the other hand, employs dual continuous variable valve timing technology for both intake and exhaust. 2. In terms of environmental protection: The camshaft in DOHC is part of the engine's valve train, which ensures that the engine timely fills the cylinder with a new combustible air-fuel mixture during operation, improving emission efficiency. DVVT adjusts the air-fuel mixture in the engine's combustion chamber to achieve the most balanced fuel ratio, which helps improve the issue of car idle vibration, thereby enhancing the smoothness and comfort of the vehicle.
10
5
Share

Will the engine malfunction light come on if the oxygen sensor is faulty?

If the oxygen sensor is faulty, the engine malfunction light will come on. Poor performance of the oxygen sensor can affect the normal operation of the engine. Relevant information about the oxygen sensor is as follows: 1. Introduction: The oxygen sensor is used to detect the concentration of oxygen in the exhaust and sends feedback signals to the ECU, which then controls the increase or decrease of the fuel injector's fuel supply, thereby keeping the air-fuel ratio of the mixture near the theoretical value. 2. Function: The sensor measures whether there is excess oxygen in the exhaust after engine combustion, i.e., the oxygen content, and converts the oxygen content into a voltage signal transmitted to the engine computer, enabling the engine to achieve closed-loop control targeting the excess air factor. This ensures that the three-way catalytic converter achieves maximum conversion efficiency for the three pollutants in the exhaust—hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOX)—maximizing the conversion and purification of emission pollutants.
17
5
Share

How Will Unlicensed and Unregistered Motor Vehicles on the Road Be Handled?

Unlicensed and unregistered vehicles on the road will be impounded by the traffic management department of the public security organ, and a warning or a fine of not less than 20 yuan but not more than 200 yuan will be imposed. Below is more information about motor vehicles on the road: 1. Carry relevant documents: Drivers must prepare documents such as the vehicle license and driving license when driving, and cannot drive without a license. 2. Comply with traffic regulations: If a motor vehicle driver commits illegal acts during driving, they will be fined according to the law and punished accordingly under traffic regulations. If a motor vehicle driver accumulates 12 points in a scoring cycle, the traffic management department of the public security organ shall confiscate their driving license. The driver must participate in learning and pass the exam before they can drive again.
10
5
Share

Can you change lanes on a solid-dashed line?

You can change lanes on a solid-dashed line (where one side is dashed and the other is solid), but only from the dashed side to the solid side lane. Here are some precautions for changing lanes on a dashed line: 1. Rush hour: During peak traffic hours, do not force a lane change, as it may disrupt the normal flow of traffic behind you and could result in penalty points. Additionally, when queuing at traffic lights, some drivers may cut in line if they see the adjacent lane moving slowly, which is also considered a violation. 2. Continuous lane changes: Even when traffic is smooth, you should not change more than two lanes in a row on a dashed lane. Continuous lane changes are a violation and may result in a 3-point penalty.
8
5
Share

Is it illegal to change car fog lights to blue?

Changing car fog lights to blue is not illegal. Car modification refers to altering the external appearance, internal styling, and mechanical performance of the original vehicle manufactured by the automaker, based on the owner's needs. It mainly includes two types: body modification and performance modification. The following are the relevant regulations for car modifications: 1. Modification requirements: Modifications can be made to the body color (including interior), engine, fuel type, frame number, etc. However, changes to the body, frame, or engine are only permitted if they are damaged beyond repair or have quality issues. When applying for modifications, proof from a repair shop and documentation of the origin of the replaced engine, body, or frame must be provided. 2. Raising the chassis is not allowed: Replacing the front bumper is permissible after approval, but modifications that enhance off-road performance, such as raising the chassis, are prohibited. If any illegal modifications are found during the annual inspection, they must be restored to their original state.
10
2
Share

Why do the steering wheel buttons not work after replacing the center console screen?

The reasons for the malfunction of the buttons on the car steering wheel are as follows: 1. Functional failure: You can manually operate the multimedia buttons on the center console or the same function buttons/knobs on the touch screen to verify whether it is a functional failure. 2. Mechanical failure: Buttons are consumable components that wear out during use, leading to a shortened lifespan. It cannot be ruled out that functional failure and uncontrollable quality are caused by poor quality, unreasonable design, or immature manufacturing processes. 3. Circuit failure or connector failure: Buttons have corresponding matching circuits and connectors, plugs, etc., for electronic and electrical connections with the center console. Accelerated oxidation of connectors due to unsuitable usage environments, aging wires, oxidation of button contacts, short circuits, or intermittent disconnections can all lead to button malfunctions.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.