What are the differences between the 2019 Audi Q5 and the 2020 Audi Q5?

How to Identify Front-Wheel Drive and Rear-Wheel Drive Cars?

Distinguishing between front-wheel drive (FWD) and rear-wheel drive (RWD) vehicles is straightforward. Simply squat down and check if there is a differential on the rear axle. If the rear axle lacks a differential, it's a front-wheel drive car. If the rear axle has a differential, it could be either a rear-wheel drive or a four-wheel drive vehicle. If the front wheels have half-shafts, it's a four-wheel drive car; if not, it's a rear-wheel drive car. Below are related introductions: 1. Front-engine, Front-wheel Drive (FF): This configuration, where the engine is placed at the front and drives the front wheels (abbreviated as FF), is prevalent in sedans (including mini and economy cars) but is rarely used in trucks and buses. 2. Layout of FF Cars: FF cars typically feature a transversely mounted engine connected to a compact transaxle. This layout is widely used in passenger vehicles with engine displacements below 2.5 liters. 3. Rear-engine, Rear-wheel Drive (RR): In this setup, the engine is placed at the rear and drives the rear wheels (abbreviated as RR). It's a popular arrangement for large and medium-sized buses, and is also used in a few mini or economy cars, but is seldom seen in trucks.

17

3

Share

Is It Legal to Install a Roll Cage in a Car?

Ordinary vehicles are not allowed to be modified by the owner, and installing a roll cage may be considered illegal. Adding a roll cage will inevitably involve altering the original vehicle structure, which introduces more safety risks when done without professional guidance. Below is relevant information: 1. Definition of a Roll Cage: A roll cage is a detachable assembly of steel tubes, typically made from cold-drawn seamless carbon steel pipes that are bent and shaped. During installation, the tubes are connected or welded one by one according to the interior contours of the vehicle. 2. Function of a Roll Cage: The material and torsional resistance of the steel pipes used in a roll cage are determined based on the vehicle's weight, generally designed to withstand impacts exceeding twice the vehicle's weight. 3. Requirements for a Roll Cage: A proper roll cage must consider factors such as joint connections, angles and design, material quality, and craftsmanship to effectively protect the vehicle and occupants in the event of an accident. Homemade roll cages may appear sturdy but often fall short in actual performance. There have been numerous reports of drivers being injured or killed by punctures from twisted vehicle frames during accidents. Therefore, it is advisable to avoid installing a roll cage on your own, as it is unnecessary for household vehicles.

14

5

Share

Can a Car Purchased Out of Town Be Licensed Locally?

A car purchased out of town can be licensed locally. In fact, according to national regulations, as long as the vehicle meets the standards and satisfies the local licensing conditions, it can be registered, regardless of where it was purchased. The process for buying a car out of town: 1. Check vehicle documentation: After purchasing a car out of town, ensure that the materials provided by the 4S store are complete, such as the car invoice, vehicle certification, maintenance manual, etc. These items are essential, and if the 4S store fails to provide any one of them, it will affect the subsequent licensing and maintenance of the new car. 2. Check car insurance: As long as the vehicle has a regular invoice, certification, purchase tax, and compulsory insurance, any new car purchased from a regular car trading market nationwide can be registered at the place of residence. To insure the car at the licensing location, simply send materials such as the chassis number, engine number, and car photos to the insurance company, and wait for the insurance to take effect before returning to the local area for licensing. 3. Check if the temporary license is appropriate: Since the car is purchased out of town, the new car will inevitably need to be driven back to the local area. Therefore, the owner must obtain a temporary license for the new car, specifically an out-of-town temporary license. Note that after obtaining the temporary license, the new car must be driven back to the local area within the validity period of the temporary license. Otherwise, if the temporary license expires, it must be reapplied for, with a maximum of three applications allowed. 4. Return to the licensing location for registration: Once the new car arrives back in the local area, the owner can proceed to the local vehicle management office to register the new car. The regulations for new car registration in China stipulate that as long as the vehicle has the four basic documents—regular invoice, certification, purchase tax, and compulsory insurance—it can be registered.

4

0

Share

What does the yellow exclamation mark mean in Honda?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and wiper fault indicator light. The following is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Mainly includes parking sensor failure, fuel cutoff system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil needs to be replaced in time. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a fault in the brake system or low brake fluid level. The brake system needs to be inspected immediately to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light. When the car's tire pressure is too low, this warning light will come on. It is necessary to check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating that there is a fault with a car light. Solution: Go to a 4S shop for inspection and treatment as soon as possible, or you can check it yourself. Focus on checking commonly used bulbs such as turn signals, fog lights, and interior lighting to see where the problem is. In addition, during the daily use of the vehicle, the warning lights displayed on the vehicle dashboard are divided into two different colors: yellow and red: Yellow indicates that there is a fault in the corresponding system, but the problem is not very serious. It is necessary to slow down and proceed to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates that there is a very serious problem in the corresponding system. In this case, do not continue driving. You should pull over immediately and call for professional help to prevent unpredictable dangers to the vehicle and personal safety caused by forced driving. It should be noted that when the car is started, all lights will come on, and the system will perform an automatic check. After the check is completed, they will automatically turn off. If a light does not come on when the ignition is turned on, stays on continuously, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help in time for car inspection to eliminate potential safety hazards.

17

0

Share

Where is the cabin air filter located in the Trumpchi GS8?

The cabin air filter in the Trumpchi GS8 is located inside the glove compartment on the front passenger side. Replacing the cabin air filter involves a relatively complex disassembly process, including removing the glove compartment, decorative panels, and over a dozen screws. To avoid unnecessary component damage, it is recommended to have it replaced at a 4S shop or a repair shop. The cabin air filter in the Trumpchi GS8 should be replaced every 20,000 kilometers, but in harsh driving conditions, it is advisable to shorten the replacement interval. Function of the cabin air filter: It filters out impurities, tiny particles, pollen, bacteria, industrial exhaust, dust, and other contaminants from the air entering the cabin, improving air cleanliness and preventing these substances from damaging the air conditioning system. This ensures a better air environment for passengers inside the vehicle. Maintenance of the cabin air filter: If the filter is dirty, clean it by blowing compressed air from the reverse side. Hold the air gun about 5 cm away from the filter and blow at a pressure of 500 kPa for approximately 2 minutes. The cabin air filter tends to accumulate a lot of dust, and compressed air can be used to blow away loose dust. Never wash it with water, as this can easily damage the filter. Poor maintenance of the cabin air filter can lead to the accumulation of dust and dirt on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. Additionally, the air conditioning system may experience reduced cooling and heating efficiency, increased power consumption, noise, and a shortened lifespan. Impact of not replacing the cabin air filter: Long-term use without replacement can cause impurities on the filter to mold, producing bacteria and unpleasant odors, which can harm the health of the driver and passengers and even induce respiratory diseases. If the air filter is severely clogged, it can increase the engine's intake resistance, leading to reduced engine power, poorer engine performance, increased fuel consumption, and accelerated engine wear and carbon buildup. Precautions for replacing the cabin air filter: Purchase a cabin air filter from a reputable manufacturer, ensuring the appearance and dimensions are checked and compared. Always replace the cabin air filter with the vehicle turned off. When loosening screws and removing clips, be sure to apply appropriate force. During installation, pay attention to the orientation of the cabin air filter to avoid installing it backward. After installation, check if the filter is properly seated, ensuring the filtering surface covers the entire air duct and fits snugly around the edges. Otherwise, filtration may fail. Precautions for using the car's air conditioning system: Do not turn on the heating immediately when warming up the car in the morning. Wait until the engine coolant temperature rises before activating the air conditioning. Do not set the air conditioning temperature too high. Prolonged exposure to excessively hot temperatures can cause drowsiness and affect driving. Also, avoid directing warm air straight at the face. If fogging occurs on the windows after turning on the heating, increase the fan speed and let it blow for a while longer. This will help the fog disappear without recurring. During long-distance driving, ventilate the cabin periodically. Poor air circulation in an enclosed space can lead to breathing difficulties for passengers over time. Turn off the air conditioning before parking and switch to external circulation with natural air. This helps clean the air conditioning system's ducts and prevents bacterial growth.

5

0

Share

Can Chinese Driver's License Be Used in Japan?

Chinese driver's license cannot be used in Japan, only an international driver's license is allowed. Below is relevant information about international driver's licenses: 1. Limitations: Although international driver's licenses exist, their applicability is still significantly restricted due to varying national regulations. 2. Certified Translation Document: An international driving permit is a certified translation document proving the holder possesses valid driving credentials in another country. Issued by authorized international organizations under the United Nations Road Traffic Convention, it certifies drivers who already hold a valid domestic license. 3. Driving Abroad: Its primary purpose is to eliminate obstacles faced by drivers abroad due to differing license requirements across countries.

8

1

Share

What are the differences between the 2019 Audi Q5 and the 2020 Audi Q5?

How to Identify Front-Wheel Drive and Rear-Wheel Drive Cars?

Is It Legal to Install a Roll Cage in a Car?

Can a Car Purchased Out of Town Be Licensed Locally?

What does the yellow exclamation mark mean in Honda?

Where is the cabin air filter located in the Trumpchi GS8?

Can Chinese Driver's License Be Used in Japan?

How many tons can a front-four-rear-eight truck carry?

Why does the car shake severely when driving at 100 to 120 km/h?

Can a Pickup Truck Purchased in Beijing Get a Beijing License Plate?

The Difference Between Bentley Red Badge and Black Badge