What are the differences between the 2018 Lavida and the 2019 Lavida?

1 Answers
LaChristopher
07/29/25 6:33pm
The difference between the 2018 Lavida and the 2019 Lavida lies in their emission standards. The 2018 Lavida complies with the China V emission standard, while all models of the 2019 Lavida meet the China VI emission standard. The configurations of the same version models remain unchanged. Below are additional details about the 2018 Lavida and the 2019 Lavida: 1. The Lavida is equipped with three types of engines: a 1.2L turbocharged engine, a 1.4L turbocharged engine, and a 1.5L naturally aspirated engine. 2. The 1.2L turbocharged engine delivers 116 horsepower and a maximum torque of 200 Nm, with the maximum power achieved at 5000 rpm and the maximum torque between 2000 to 3500 rpm. 3. The 1.4L turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm, with the maximum power achieved at 5000 rpm and the maximum torque between 1750 to 3000 rpm. 4. The 1.5L naturally aspirated engine delivers 113 horsepower and a maximum torque of 145 Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 3900 rpm. 5. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
Was this review help?
8
2
Share
More Forum Discussions

Where is the Buick Regal Air Conditioning Control Module Located?

Buick Regal air conditioning control module is located at the central control air conditioning panel. The automotive air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle compartment. It provides a comfortable riding environment for passengers, reduces driver fatigue, and enhances driving safety. The air conditioning system has become one of the indicators to measure whether a car is fully equipped. The adjustment methods for Buick Regal air conditioning temperature control are as follows: 1. Cooling and dehumidification: When the air conditioning is turned on, rotate the temperature control dial to set the desired temperature, with a range between 18°C and 32°C. If the air recirculation indicator is off, switch the air circulation mode to the external circulation mode. 2. Heating: Rotate the temperature control dial to set the desired temperature. Do not set the temperature lower than the outside temperature, as this may result in improper temperature control. If the windows fog up, use the defroster to remove the fog instead of using the heater with the air conditioning turned off.
10
2
Share

How to Replace the Remote Control Battery for Car Locks?

To replace the battery in a car remote controller, follow these steps: pull out the metal mechanical key, pry open the key cover, replace the new battery, and reattach the original cover. Detailed instructions are as follows: Pull out the metal mechanical key: Locate the switch on the back of the car key, pull the top part outward, and the metal mechanical key inside will be removed, revealing a small groove. Pry open the key cover: Use a flat-head screwdriver or another tool to pry open the key cover along the groove. Once a gap appears, you can manually open it. Replace the new battery: After opening the key cover, remove the old battery and install the new one, paying attention to the correct polarity. Reattach the original cover: Put the key cover back in place and reinsert the mechanical key.
3
2
Share

Will using 92-octane gasoline affect the Audi A3?

Audi A3 using 92-octane gasoline will have an impact, as it will reduce power output. The Audi A3 should be filled with 95-octane gasoline. Correct method for selecting gasoline octane rating: Check the label inside the fuel tank cap. There is always a (recommended standard) sticker on the inside of the car's fuel tank cap, which is the most accurate and scientific standard calculated by engineers based on the engine's technical parameters. Hazards of using the wrong gasoline: If a high-compression engine uses low-octane gasoline, it will cause incomplete combustion, severe engine vibration, reduced power output, damage to engine components, increased fuel consumption, and poor driving performance. However, if a low-compression engine uses high-octane gasoline, it will result in delayed combustion, meaning the auto-ignition point is not reached at maximum compression, leading to incomplete combustion as well. This requires additional fuel injection to ensure power output, which not only offers no benefit to the engine but also increases fuel consumption.
9
4
Share

What does the license plate in Ma'anshan start with?

Ma'anshan license plates start with Wan E. Ma'anshan City belongs to Anhui Province, whose abbreviation is Wan, hence the license plates begin with Wan E. Here is some relevant information: 1. Civilian vehicle license plates all have a Chinese character, which is the abbreviation of the municipality or province, followed by a letter representing the city or district. The combination of the Chinese character and letter can indicate where the vehicle is from. 2. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. They are usually made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. License plates serve as a numbering and information registration system for vehicles, with the primary purpose of identifying the vehicle's region of registration and enabling the tracking of the vehicle's owner and registration details based on the plate.
2
3
Share

What does the rear button in the car mean?

rear literally means the rear or back. The Rear button in the car is the rear windshield defogger switch. Pressing it can remove the fog on the rear windshield. The rear button in the car is generally located in the air conditioning control panel. Here are some methods for defogging the rear windshield: 1. Open the windows for convection: You can open a gap in the windows on both sides, allowing the air inside and outside the car to form convection, reducing the temperature difference, and the fog will gradually disappear. 2. Use the air conditioning system: Simply select the appropriate gear of the air conditioning to use the wind blown by the air conditioning to defog. 3. Use professional defogging agents: Spray the defogging agent on the inner surface of the car glass, then wipe it clean. While removing dirt from the glass, it also forms a protective film to prevent water vapor from condensing into a fog layer on the glass.
6
4
Share

What is a Vehicle PDI Inspection?

PDI (Pre-Delivery-Inspection) refers to the pre-sale inspection record of a vehicle. During the period from when a new car rolls off the production line until it is sold, various issues may arise. Therefore, a pre-sale inspection is conducted before delivering the car to the consumer to ensure the vehicle is problem-free. PDI is a mandatory inspection that new vehicles must pass before delivery. Below is an introduction to PDI inspection: 1. According to standard procedures, a PDI inspection form (Pre-Delivery Inspection Certificate) with at least 40 items must be completed during vehicle handover. Do not blindly sign the inspection form, as signing indicates the user's acceptance of the vehicle's condition at the time of sale. 2. PDI inspection includes checking various control module system data, fuel system, lighting system, braking system, air conditioning system, steering system, cooling system, inspecting wheels (including spare tire and tire pressure), battery and various fluid levels, engine compartment wiring harness, cleaning the engine compartment and body surface, and deactivating the vehicle transport mode, among others.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.