What are the differences between the 2018 Lamando and the 2019 Lamando?

1 Answers
MacHarper
07/29/25 1:25pm
Here are the differences between the 2018 Lamando and the 2019 Lamando: 1. In terms of exterior design, the 2019 Volkswagen Lamando has undergone subtle adjustments to the upper and lower grilles and headlights, resulting in a wider, flatter, and more level front end. The grille features a continuous dot-matrix chrome strip decoration, and LED headlights are standard across the entire lineup, with a simpler internal design and added sporty elements. 2. The side profile of the 2019 Volkswagen Lamando exhibits a distinct sense of layering, with a crease design for the waistline and blackened B-pillars. The body length is 4615 mm, width is 1826 mm, height is 1425 mm, and the wheelbase is 2656 mm, making it longer than the 2018 Lamando.
Was this review help?
16
5
Share
More Forum Discussions

How many kilometers can a car run when the fuel gauge shows a yellow light?

When the fuel gauge shows a yellow light, the car can generally run about 50 kilometers, but this also depends on the size of the fuel tank. When the fuel gauge light turns yellow, there is approximately 10% of fuel remaining in the tank. Under good road conditions, it is no problem to continue driving for 40 kilometers after the low fuel level warning appears. It is not recommended to refuel the car only after the yellow light comes on, as this may affect the service life of the fuel pump. When the fuel level drops to a certain point, the fuel pump will suck in a certain amount of air. The lubrication and cooling effects of air are certainly not as good as those of fuel, and excessive air intake can damage the pump. If driving in the city, there is no need to worry when the fuel gauge light comes on, as there are many gas stations in urban areas, and you will encounter one every few kilometers. If the fuel gauge light comes on while driving on the highway, there is a gas station every 40 kilometers, and the remaining fuel is sufficient to reach the next gas station.
5
5
Share

How to Play Music in the Car Using a Data Cable?

Steps to play music in the car using a data cable: 1. Connect your phone to the vehicle normally using the data cable; 2. Open your phone and click on Settings, select General, click on CarPlay, which will display the connected vehicle information, click Connect, open the phone's music player, and select your favorite music to play. Car audio systems are installed to alleviate the monotony of travel for drivers and passengers. Nowadays, car audio systems have reached high standards in terms of sound quality, operation, and vibration resistance, capable of handling the bumps on rough roads while ensuring stable performance and perfect sound quality.
6
2
Share

What are the pros and cons of the auto hold function in cars?

Advantages of auto hold: In situations requiring short stops such as traffic lights, the system automatically brakes the wheels after the vehicle comes to a complete stop to prevent rolling. During hill starts, the system automatically applies brakes to prevent backward sliding, and releases the wheels automatically when starting to move forward. There's no need to pull the handbrake when parking and locking the car - the system will automatically brake the wheels (though this feature is only available on certain models). Disadvantages of auto hold: If the auto hold function remains active during reversing, it means the vehicle cannot be controlled for slow movement by braking. Poor throttle control in this situation may lead to accidents. The auto hold function also produces noticeable jerking when engaged. The working principle of auto hold: For temporary stops when quick restart is needed, the parking brake is controlled by ESP. The computer uses multiple sensors to measure vehicle levelness and wheel torque, determines any rolling tendency, and applies appropriate braking force to keep the vehicle stationary. When temporary parking exceeds a set duration, the braking system switches to mechanical rear-wheel parking instead of the initial four-wheel hydraulic braking. When preparing to move forward, the electronic system detects throttle pressure and (for manual transmission models) clutch pedal travel to determine when to release the brakes.
7
5
Share

Reasons Why the Car Key Cannot Be Pulled Out

Reasons why the car key cannot be pulled out are: 1. The automatic transmission is not truly in the P (Park) position. Sometimes it may appear to be in the correct position, but it hasn't triggered the electronic sensor, or there might be coins or other objects blocking the gear slot; 2. The steering wheel was not properly aligned during the last parking, causing an abnormal lock. Solutions: 1. The owner should check if there are any obstructions in the gear slot. If there are, remove them, start the car, shift the gear again to ensure it's fully in position, and the key can then be pulled out; 2. The owner can gently turn the key with the right hand while slightly rocking the steering wheel left and right with the left hand, and the key can then be turned.
4
5
Share

Can halogen lights be converted to LED lights just by replacing the bulbs?

Converting halogen lights to LED lights cannot be done just by replacing the bulbs; the entire LED light assembly needs to be replaced. Simply changing the bulbs will not be effective. If the original vehicle does not have lenses, it is recommended not to modify the lights, as the improvement will be minimal and may cause glare for the driver, affecting visibility and posing significant safety risks. To achieve good lighting effects with LED lights, the best approach is to install lenses. The installation of lenses depends on the vehicle model, as sufficient space inside the headlight housing is required for proper installation. For example, if the vehicle originally lacks lenses, modifying the lights would require removing the headlight housing, bumper, etc. Such operations rely heavily on the technician's experience. If not installed properly, the headlight housing may easily accumulate water or become foggy during rainy or foggy weather, further compromising driving safety.
13
0
Share

How to Use the Electronic Parking Brake?

Electronic parking brake usage method: 1. Activate the electronic parking brake: Step on the brake pedal, pull up the electronic parking brake switch until the indicator light on the dashboard illuminates. If the vehicle is turned off without activating the electronic parking brake, it will automatically engage. 2. Emergency braking with electronic parking brake: When the vehicle cannot be stopped using the foot pedal brake, pull and hold the electronic parking brake switch for more than 2 seconds to perform emergency braking. 3. Deactivate the electronic parking brake: While stepping on the brake, press the electronic parking brake switch. The indicator lights on both the dashboard and the switch will turn off. When the engine is running, pressing the accelerator pedal will automatically release the electronic parking brake.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.