What are the differences between the 2018 and 2019 Envision models?

What Causes the Abnormal Noise When Turning on the Car Air Conditioning?

Reasons for abnormal noise when turning on the car air conditioning include excessively high pressure in the high-pressure pipe of the air conditioning system, dirty condenser, poor heat dissipation, blocked expansion valve, and high pressure in the pipes. Key points for air conditioning fault inspection: Observe the working conditions of the indoor and outdoor units: For example, check the display status of the indicator panel, whether the indoor unit is working, whether the fan speed output is normal, and whether the outdoor fan and compressor are running to determine whether the issue is electrical or system-related causing the lack of cooling. Measure various data of the air conditioner: Such as water leakage from the air conditioner, the temperature difference between the air inlet and outlet (the normal temperature difference should be 12-14 degrees). However, due to environmental humidity and temperature influences, the data can only serve as a reference value. Diagnosing air conditioning faults: Refrigeration system: Inspect each pipeline of the refrigeration system for cracks, damage, frost, or condensation. Check for any contact or friction between refrigeration pipelines or between pipelines and the casing, especially at the welding points of the refrigerant pipelines and connection joints for leaks. Any leakage point will have oil stains. You can also use a clean soft cloth or paper to wipe the welding points and connection joints to check for oil stains to determine if there is a leak. Electrical system: Check if the fuse in the electrical system has blown, whether the insulation of electrical wires is intact, whether the circuit board is broken, or if connections are loose. Pay special attention to whether electrical connections are secure, as screws and connectors can easily become loose, leading to poor contact. Ventilation system: Observe whether the air filter, heat exchanger coils, and fins are excessively dusty; check if the air inlet and outlet are unobstructed; ensure the fan and blades are functioning normally; and verify whether the airflow is normal.

8

4

Share

Which country does the 15c4e car engine belong to?

15c4e car engine is a Chinese engine, independently developed and produced by SAIC-GM. The 1.5T version of the Roewe i5 is equipped with the 15c4e engine, which has a maximum power of 124 kW and a maximum torque of 250 Nm. Here are some maintenance methods for the 15c4e engine in daily use: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and keep the oil level moderate; When the oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing the oil to bypass through the bypass valve and carry contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates from the oil, clogging filters and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

19

2

Share

What is the ground clearance of the Audi Q7?

The ground clearance of the Audi Q7 is 201 mm. The Audi Q7 is a mid-to-large size 5-door 7-seater SUV with the following body dimensions: length 5067 mm, width 1970 mm, height 1731 mm, wheelbase 2996 mm, and fuel tank capacity 85 liters. The Audi Q7 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW at 5000-6500 rpm and a maximum torque of 370 N·m at 1600-4300 rpm. It features a front-engine four-wheel-drive layout and multi-link independent suspension on both front and rear axles.

13

5

Share

What does the check yellow light mean?

check yellow light is the engine indicator light. Specific information is as follows: 1. When the yellow light is on: When it lights up, it indicates that there is a problem with the engine's electronic control system. According to the driver's manual, you should promptly go to a 4S shop for inspection. 2. Timely repair: If not repaired in time, it may affect the normal operation of the engine. When you operate the battery, the engine control system is initialized, so the fault light will temporarily turn off. However, after driving for a while, it will light up again, indicating that there is indeed a problem with the engine. It is recommended that you go to a 4S shop for repair.

17

4

Share

How Many Turns to Lock the Steering Wheel for C1?

C1 steering wheel locks at one and a half turns. Specific details are as follows: 1. Steering Wheel: Generally, vehicles lock at one and a half turns, while large trucks require two and a half turns. The steering wheel is typically connected to the steering shaft via splines, converting the force applied by the driver on the wheel's edge into torque transmitted to the steering shaft. 2. Common Steering Wheel Issues: Steering wheel vibration, where the wheel shakes violently at medium to high speeds, accompanied by periodic noises from the chassis, often indicates an imbalance in the steering linkage. Excessive wear in the drive shaft, spline shaft, or spline sleeve may be the cause.

20

2

Share

What is the actual range of the Tesla Model 3?

Tesla Model 3 has a maximum range of 595 kilometers. Here are the relevant details: 1. Pure Electric Vehicle: The Tesla Model 3 is a pure electric vehicle launched by Tesla Motors. To meet the diverse needs of consumers, Tesla offers multiple configurations of the Model 3, which utilizes Panasonic 21700 battery cells. The energy density of the battery pack has been improved, with a battery capacity of 80kWh. 2. Powertrain: This car is equipped with a permanent magnet synchronous motor, with a maximum power output of 340kW and a maximum torque of 639 Nm. In terms of the transmission system, the motor is paired with a fixed gear ratio transmission, also known as a single-speed transmission for electric vehicles.

7

1

Share

What are the differences between the 2018 and 2019 Envision models?

What Causes the Abnormal Noise When Turning on the Car Air Conditioning?

Which country does the 15c4e car engine belong to?

What is the ground clearance of the Audi Q7?

What does the check yellow light mean?

How Many Turns to Lock the Steering Wheel for C1?

What is the actual range of the Tesla Model 3?

What are the disadvantages of adding too much refrigeration oil?

What Are the Reasons for the Engine Light to Illuminate?

What are the differences between Toyota Reiz 2.5S and 2.5V?

What are the major maintenance items for a vehicle at 40,000 kilometers?