What are the differences between the 2017 and 2018 Magotan?

1 Answers
DelClara
07/29/25 8:10pm
The differences between the 2017 and 2018 Magotan are as follows: 1. Different exterior: The 2017 model features the older-style appearance; the 2018 Magotan adopts a three-bar front grille, with body side lines extending from the front wheel arch to the rear. 2. Different powertrains: The 2017 model is equipped with three engines: 2.0T, 1.8T, and 1.4T turbocharged engines; the 2018 Magotan is powered by the current model's turbocharged engines. a. The 2.0T engine is part of the EA888 third-generation series, with a maximum power of 220 horsepower and a maximum torque of 350 Nm. The 1.8T engine is also from the EA888 series, with a maximum power of 180 horsepower (132 kW) and a maximum torque of 300 Nm. b. The 1.4T model is equipped with an EA211 series engine, with a maximum power of 150 horsepower (110 kW) and a maximum torque of 250 Nm. c. The 2018 Magotan is powered by the current model's EA211 series 1.4T turbocharged engine, with a maximum power of 110 kW; and the EA888 series third-generation 1.8T and 2.0T turbocharged engines, with the former having a maximum power of 132 kW and the latter 162 kW.
Was this review help?
4
1
Share
More Forum Discussions

What is the method to remove double-sided tape from car paint?

Methods to remove double-sided tape from car paint are: 1. Soak the area with double-sided tape using essential balm, wait for 15 minutes, then wipe it off with a dry cloth; 2. Squeeze lemon juice onto the area with double-sided tape residue and scrub repeatedly to remove it; 3. Use the hot air setting of a hair dryer to blow on the double-sided tape marks until they soften, then erase them with an eraser or a soft cloth; 4. Soak a dry dishcloth with white vinegar or vinegar, cover the area with double-sided tape, let it soak completely for 15 to 20 minutes, then gradually wipe it off from the edges with the dishcloth; 5. Drop some medical alcohol on the surface with adhesive marks, soak it, and then wipe it off with a soft cloth or tissue.
9
5
Share

What Causes Body Resonance in the Audi A6?

Here are the reasons and solutions for body resonance in the Audi A6: Poor Tire Balance: It may be due to poor tire balance. The owner should promptly perform a four-wheel alignment and dynamic balance. If the vehicle does not pull to one side, a dynamic tire balance may suffice. Ignition System Issues: During cold starts, the engine requires a richer air-fuel mixture, which demands higher ignition energy. If the spark plug gap is too large, or the ignition coils or high-voltage coils are aged, the ignition energy may decrease, causing the body to shake. Inspect the spark plugs and distributor wires, and adjust or replace them if necessary. Fuel System Problems: Fuel system issues are often caused by clogged fuel lines, leading to poor fuel supply. Symptoms include engine shaking, unstable idling, and stalling while driving. Check the fuel flow rate and volume.
16
2
Share

What is the ground clearance of the Range Rover Evoque?

The minimum ground clearance of the Land Rover Range Rover Evoque is 151mm. Data for the domestic Land Rover Range Rover Evoque: Taking the 2020 model as an example, the length, width, and height are: 4371x1904x1649mm, with a wheelbase of 2681mm. It has 5 seats. The curb weight is 1955KG, the trunk volume is 472~1156 liters, and the minimum ground clearance is 151mm. Data for the imported Land Rover Range Rover Evoque: Taking the 2018 model as an example, the length, width, and height are: 4370x1965x1609mm, with a wheelbase of 2600mm. It has 4 seats.
4
5
Share

What is the method for removing the steering wheel of a Baojun 730?

730 Baojun steering wheel removal method: 1. Turn off the vehicle and all electrical devices; 2. Turn the steering wheel 90 degrees, there are holes on the back of the steering wheel, poke them with an appropriate tool; 3. Return the steering wheel to the center, then turn it 90 degrees in the opposite direction and poke the other holes to remove the airbag assembly; 4. After removing the screws, take off the airbag, remove the steering wheel screws, and then take off the steering wheel. The Baojun 730 is an MPV with a 5-door, 7-seat body structure. Its dimensions are 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. The suspension system uses MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
18
2
Share

What is the trunk space of the Borgward BX7?

Borgward BX7 trunk space: Maximum depth is 1890mm, regular depth is 990mm, minimum width is 1010mm, and height is 740mm. Function of the trunk: Whether it's a sedan or a hatchback, there is a certain amount of space at the rear of the car. The primary purpose of this area is to absorb and buffer some of the collision energy in the event of a rear-end accident, which is particularly effective in minor to medium collisions. It helps to release and mitigate the impact force, thereby reducing or minimizing passenger injuries. Introduction to the trunk: The trunk typically contains the car's spare tire, emergency kit, vehicle tool kit, warning triangle, fire extinguisher, car refrigerator, and the emergency fuel cap release cable. Some high-end models also place the starter battery in the trunk.
5
0
Share

Introduction to the Buttons and Controls of Changan Oshan X5

Oshan is equipped with a touch-screen display with a clear interface and virtual buttons on both sides. It features a rich array of functions including radio, GPS navigation, rearview camera, Bluetooth calling, and more. Below are the detailed introductions: 1. Central Control: The car's central control manages comfort and entertainment devices such as air conditioning and audio systems. It includes the central door lock system, allowing the driver to control all door switches and window lift systems. The central control also encompasses the central console, which houses various vehicle controllers like the audio control panel. 2. Door Lock Controller: This is a control device that provides lock/unlock pulse current to the door lock actuator. Regardless of the type of door lock actuator, it controls the lateral movement of the connecting rod by altering the direction of the current, thereby achieving the locking and unlocking of the door.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.