What are the differences between the 2016 and 2018 LaCrosse models?

Can Slamming the Car Door Cause Damage?

The car door includes components such as the window regulator, audio system, door lock, horn, anti-collision beam, waterproof layer, and sound insulation layer. Long-term forceful door slamming can lead to loosening of hinges, limiters, audio systems, sensors, and other parts, accelerate the aging of sealing strips, damage the sound insulation layer, reduce noise isolation effectiveness, and easily cause displacement and deformation of the window regulator, affecting the door's lifespan. 1. How to properly close the car door: After exiting the vehicle, push the door to a distance of 10-15cm from the car body, then gently close the door with a slight force. Alternatively, slowly push the door until it closes before releasing, which can effectively protect the door. 2. Door maintenance tips: Without regular maintenance of door opening and closing, hinges and limiters may experience increased wear and rust if not lubricated in time, potentially leading to malfunctions. Professional equipment can be used for a comprehensive vehicle inspection, and original grease can be applied to lubricate the door hinges and limiters, reducing wear and tear.

12

4

Share

Will driving 200 kilometers in S mode damage the car?

Driving 200 kilometers in S mode can potentially harm the vehicle. The S mode merely delays gear shifts without altering other operational aspects, which inevitably increases the transmission's workload in the short term, raises its temperature, and consequently accelerates wear. Therefore, it's advisable to avoid prolonged use of S mode. In terms of fuel consumption, since higher engine speeds require more fuel injection, S mode consumes significantly more fuel compared to normal driving mode. Tips for maintaining your car's transmission: Smooth driving: Avoid aggressively emphasizing acceleration speed in automatic transmission vehicles, as they are designed for comfort. During normal driving, pressing the accelerator pedal about one-third of the way is sufficient, allowing the transmission control unit to manage gear shifts based on vehicle speed and engine load signals. Early upshifting: If the automatic transmission shifts gears late, avoid stomping on the accelerator, as this will only produce the opposite effect. The timing of gear shifts in an automatic transmission is determined by the control unit based on vehicle speed and engine load signals, with the latter being influenced by the degree of throttle input.

3

0

Share

Why does the fuel gauge indicator light stay on after filling up the car with gas?

After filling up the fuel tank, the fuel tank float rises so high that the contacts and sliding piece of the fuel level sensor cannot reach the edge position, sometimes even disconnecting. This results in a high resistance, similar to the situation when the fuel is low, causing the fuel warning light to activate and stay on. The fuel gauge indicator light staying on is caused by the following reasons: 1. Fuel level sensor malfunction: The fuel level sensor detects the position (height) of fuel in the container by measuring the change in capacitance between the sensor casing and the sensing electrode when fuel enters, converting this change into a current change. If possible, you can replace the fuel level sensor at a repair shop. 2. Wiring fault: When there is a short circuit or open circuit in the wiring, the information from the fuel level sensor cannot be read, resulting in the indicator light staying on.

6

0

Share

What Causes the Speed and RPM Not to Increase When the Throttle is Fully Pressed?

When the throttle is fully pressed but neither the speed nor the RPM increases, the main factors causing this issue typically involve faults in the car's throttle pedal, intake system, fuel system, ignition system, or ECU control unit. Below is relevant information about spark plugs: 1. Introduction: The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high voltage into the combustion chamber, creating a spark across the electrode gap to ignite the air-fuel mixture in the cylinder. It mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and a metal shell, with the side electrode welded to the shell. 2. Working Principle: Under high voltage, the air between the spark plug's center electrode and side electrode rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties.

10

2

Share

What Causes the Accelerator Pedal to Feel Heavy?

If the accelerator pedal feels a bit heavy, it is most likely caused by the spring under the pedal being too stiff or having excessive tension. You can try using pliers to bend the end of the spring that hooks onto the pedal in the opposite direction to reduce its tension. Another possible cause is a dirty throttle body, which can lead to inaccurate readings from the oxygen sensor. Checking the engine data stream may help diagnose the issue. Below is some related information about the car accelerator: 1. Function of the car accelerator: In gasoline engines, the accelerator does not control the fuel injection volume but rather the throttle opening size. A smaller opening results in less air-fuel mixture entering the cylinders, reducing engine power output, and vice versa. 2. Solutions for a heavy accelerator pedal: Cleaning the fuel system may help. Alternatively, try accelerating further to see if the engine RPM increases while the speed does not. If this happens, it could indicate a damaged sensor inside the transmission, which may have locked the overdrive gear.

20

5

Share

What are the reasons for the oil pump light to come on?

The reasons for the oil pump light to come on are as follows:1. Pressure relief valve blockage: To prevent excessive oil pressure in the lubrication system, which increases engine power consumption and causes oil leaks at sealed connections, a pressure relief valve is installed in the main oil passage or oil pump. A malfunctioning pressure relief valve will result in abnormal oil pressure.2. Insufficient oil volume: If the oil volume is insufficient, the oil pump's output will decrease or fail to pump oil due to air intake, leading to a drop in oil pressure and causing the oil light to illuminate.3. Engine overheating: Excessive engine temperature accelerates the aging, deterioration, and thinning of the oil, causing it to leak from various fitting gaps and reducing pressure.4. Oil filter blockage: When the oil filter is blocked and cannot circulate, the bypass valve on its base opens, allowing oil to enter the main oil passage without filtration. If the opening pressure of the bypass valve is set too high or too low, the oil pump pressure will rise or fall accordingly.

6

3

Share

What are the differences between the 2016 and 2018 LaCrosse models?

Can Slamming the Car Door Cause Damage?

Will driving 200 kilometers in S mode damage the car?

Why does the fuel gauge indicator light stay on after filling up the car with gas?

What Causes the Speed and RPM Not to Increase When the Throttle is Fully Pressed?

What Causes the Accelerator Pedal to Feel Heavy?

What are the reasons for the oil pump light to come on?

What Are the Common Knowledge Points for Car Usage?

What is the normal pressure for a fuel pump pressure gauge?

What Are Some Useful Car Tips?

What are the effects of slamming car doors?