···
Log in / Register

What are the differences between T-Roc and T-Cross?

1Answers
VonAbel
08/31/2025, 11:53:45 PM

The differences between T-Roc and T-Cross are: 1. Different body dimensions: T-Roc has a body length of 4318mm, width of 1819mm, height of 1582mm, and a wheelbase of 2680mm; T-Cross has a body length of 4218mm, width of 1760mm, height of 1599mm, and a wheelbase of 2651mm. 2. Different fuel tank capacities: T-Roc has a fuel tank capacity of 51 liters; T-Cross has a fuel tank capacity of 42.5 liters. 3. Different trunk volumes: T-Roc has a trunk volume of 401 liters; T-Cross has a trunk volume ranging from 329 to 1319 liters. Both T-Roc and T-Cross are SUV models produced by Volkswagen.

Was this review help?
112
Share
More Q&A

Where is the engine number of the Passat?

The engine number of the Volkswagen Passat is located below the coolant reservoir, at the junction of the engine block and the transmission. The engine number can also be found on the vehicle's registration certificate. Below is an introduction to the engine number: 1. The car engine number is the vehicle identification code, with VIN being the abbreviation for Vehicle Identification Number. 2. Since the ASE standard stipulates that the VIN code consists of 17 characters, it is commonly referred to as the seventeen-digit code. Correctly interpreting the VIN code is crucial for accurately identifying the vehicle model and conducting proper diagnosis and maintenance. 3. The vehicle identification code is like the car's ID number, determined according to national vehicle management standards, containing information such as the manufacturer, model year, body type and code, engine code, and assembly location. 4. The new registration certificate usually prints the VIN code in the 'frame number' column.
106
Share

Why does the car's water temperature rise so slowly?

The slow rise in car water temperature is caused by a damaged thermostat or the cooling fan running constantly. The thermostat operates based on the engine's water temperature. If the thermostat malfunctions and the valve fails to close, the coolant will continuously circulate in the large loop, potentially causing the engine's water temperature to remain too low. The water temperature refers to the temperature of the antifreeze, which is a coolant with anti-freezing properties. It prevents the coolant from freezing and expanding in cold winter conditions, which could crack the radiator or damage the engine cylinder block or head. The method for replacing antifreeze is as follows: 1. Open the vehicle's engine hood, and you can see the coolant reservoir in the upper right corner; 2. Open the antifreeze drain plug under the radiator to drain the old antifreeze; 3. Add new antifreeze, tighten the cap, and the antifreeze replacement is complete.
109
Share

What Causes the Steering Wheel to Lean Left When Driving Straight?

The reasons for the steering wheel leaning left when driving straight are as follows: 1. Inconsistent tire pressure or uneven wear on both sides of the wheels, leading to differences in wheel diameter and traction. In this case, the tire pressure should be adjusted to the standard level or the tires should be replaced. 2. Uneven wear of the tread patterns can also cause the steering wheel to lean left. 3. Damaged springs and shock absorbers, where insufficient elasticity of the springs can cause excessive compression, and oil leakage in the shock absorbers. 4. Suspension damage, deformation, or misalignment can lead to the steering wheel leaning left, causing the vehicle to pull to one side. The following are forms of vehicle pulling: 1. Braking pull: This occurs when the vehicle's direction deviates during braking. 2. Driving pull: This refers to the situation where the driver must tightly hold the steering wheel to maintain straight-line driving under normal driving conditions.
105
Share

What is SL Grade Engine Oil?

SL is the lowest grade of engine oil. Below is an introduction to engine oil grades: 1. API (American Petroleum Institute) classifies engine oil grades from SA to SN, etc. This label actually describes the quality of the oil. The further back the letter after 'S' is in the alphabet, the higher the quality of the oil. So far, SN is the highest grade. If the series starts with 'C', it represents diesel engine oil, with specifications including: CA, CB, CC, CD, CE, CF, CF-2, CF-4, CG-4, CH-4, CI-4. When both 'S' and 'C' letters are present, it indicates that the oil is suitable for both gasoline and diesel engines. 2. SN grade is currently the highest grade of engine oil. SJ was the standard in the 1990s, SL was the standard in 2001, SM was the standard in 2004, and SN became the standard in 2010. The best SL-grade oils are mainly semi-synthetic or mineral oils, while SN-grade oils are all fully synthetic, representing the highest standard of engine oil.
118
Share

Will changing the color of brake calipers pass the annual inspection?

Changing the color of brake calipers can pass the annual inspection, but it is not recommended. The following are the specific details: 1. The annual inspection may fail only if the vehicle's lighting performance does not meet the standards, the vehicle has braking faults, the vehicle's exhaust emissions do not meet the standards, or there are unresolved traffic violation records. It is important to keep the vehicle's appearance consistent with the driving license; 2. The brake caliper is a major component of disc brakes, equipped with a brake caliper piston that pushes the brake pads to contact the brake disc, generating braking force. Each wheel brake has only one caliper; 3. Depending on the number of caliper pistons, calipers are divided into floating and fixed types. Floating calipers can move axially along the brake disc, with pistons arranged on one side, typically having only one piston. Fixed calipers have pistons arranged oppositely, with an even number of pistons.
101
Share

Will the Engine Stall in Second Gear at Idle Speed?

When driving below 10 km/h in second gear, the engine will not stall for the following reasons. First, most vehicles have an idle speed of around 10 km/h in second gear, and the recommended speed range for second gear is between 5 km/h and 30 km/h (although higher speeds are possible, they are not ideal for the vehicle). Therefore, as long as the car is moving, it generally won't stall. However, when accelerating, it's important to use the clutch partially engaged (semi-clutch) to start, otherwise the gears may clash, potentially causing severe damage to the vehicle. Alternatively, shifting down to first gear for acceleration is the best approach. Here’s a quick guide to the speed ranges for different gears: 1. In first gear, the speed range is 0 km/h to 10 km/h. 2. In second gear, the speed range is 10 km/h to 30 km/h. 3. In third gear, the speed range is 20 km/h to 40 km/h. 4. In fourth gear, the speed range is 30 km/h to 50 km/h. 5. In fifth gear, the speed range is 50 km/h and above.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.