···
Log in / Register

What are the differences between silent tires and regular tires?

4 Answers
CatherineLee
07/29/25 7:55pm

The differences between silent tires and regular tires are as follows: 1. Width variation: Some silent tires are slightly narrower than regular tires of the same model, primarily to reduce contact with the ground and minimize friction-induced noise. 2. Drainage and handling: Silent tires often feature asymmetrical tread block designs, which can compromise drainage and handling performance. As a result, silent tires may perform worse than regular tires on wet or slippery surfaces. 3. Material composition: The rubber compound used in silent tires is softer than that in regular tires, resulting in a lower wear resistance index. For example, many car enthusiasts report that Michelin silent tires wear out faster due to this reason. 4. Tread pattern: Silent tires typically have finer and denser tread patterns to reduce air compression noise between tread blocks. However, this finer tread pattern is more prone to trapping small stones.

Was this review help?
17
0
Share
DallasLee
08/14/25 3:43pm

As a dad who often takes my family on road trips, quiet tires have been a real game-changer. The noise from regular tires at high speeds is unbearable – that constant droning makes it hard to even hold a conversation in the car. After switching to quiet tires, the difference is night and day: they use softer materials and special tread patterns to effectively absorb road noise, making the ride noticeably quieter and more comfortable. My family can sleep or chat in the back seat with much more ease. While regular tires are cheaper, their loud noise compromises comfort; quiet tires cost about 10-15% more and may have slightly shorter lifespans, but the improved comfort for my family is worth every penny. Plus, they maintain good wet traction for safe driving in rainy conditions. If you value family driving comfort, upgrading to quiet tires is definitely worth considering.

Was this review help?
12
4
Share
Expand All
FelicityRose
10/15/25 8:12am

As a young car enthusiast who loves speeding, I have firsthand experience with tire differences: regular tires produce so much noise during high-speed acceleration that it drowns out the music, which is incredibly annoying. After switching to quiet tires, the noise reduction effect is amazing—driving becomes smoother and quieter, allowing me to fully focus on enjoying the driving experience. They use asymmetric tread patterns and soft rubber to reduce noise, while regular tires are designed for versatility but come with more noise. Although quiet tires are slightly more expensive and offer a bit softer handling, they strike a great balance for everyday high-speed performance. Regular tires are budget-friendly but less satisfying. I recommend friends who seek a dynamic driving experience to opt for quiet tires—spending a bit more for a quieter and more powerful feel upgrades the driving atmosphere instantly. Once you try them, you’ll notice a huge difference.

Was this review help?
9
5
Share
Expand All
OliviaFitz
11/29/25 2:16am

I'm a practical person, and whether to buy noise-reducing tires depends on the situation. Regular tires are cheaper and durable, a bit noisy but tolerable, good enough for daily commutes. Noise-reducing tires excel in noise reduction, offering a quiet and comfortable ride, though they're pricier and have a slightly shorter lifespan. For a commuter car, saving money is key—regular tires will do. But for long trips, noise-reducing tires are more worthwhile, keeping the cabin quiet and reducing fatigue. Weather doesn't affect safety much, as both types have similar wet-road grip. I weigh it by budget: save money with regular tires or spend more for comfort and quietness. With regular wear checks, both can last long.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

How to solve the problem of BMW X1 air conditioner not cooling?

First, drive with the windows open for a while to equalize the indoor and outdoor temperatures, then close the windows, turn on the air conditioner's internal circulation mode, and set it to the coldest mode with the highest fan speed. If the car air conditioner can still cool, go to a 4S shop to check if there is a lack of refrigerant (Freon). If it is lacking, Freon can be added. It is best to replace the air filter during seasonal changes and perform a cleaning of the air conditioning ducts. For air conditioning circuit issues, check whether the AC switch on the control panel is malfunctioning, whether the main unit's temperature control circuit is normal, and whether the compressor's electromagnetic coil is engaging properly.
16
5
Share

How to Match the Remote Key for Besturn B70?

Park the car and ensure all four doors are closed. Then, open and close the left front door (the main driver's side door) three times. Within three seconds, insert the key and turn it on and off five times consecutively (without starting the engine). Remove the key and press the unlock and lock buttons on the remote. You should hear a response from the remote. After the remote responds, press the unlock and lock buttons on the new remote. The car may experience remote control confusion at this point, requiring a re-matching process. Ensure all four doors are locked, insert the key, and turn it on and off five times within five seconds. Remove the key and press the unlock and lock buttons on the remote twice to complete the process.
18
2
Share

How to Reset the Maintenance Wrench Light on Buick Encore?

Turn off the ignition switch to cut off the power supply to the car. Press and hold the buttons on the dashboard simultaneously, keeping both trip reset buttons pressed for more than 5 seconds. Turn the key to the second position (accessory mode) without starting the engine, and wait until all dashboard lights illuminate. This process typically takes about 10 seconds. Wait for the wrench light to go off. Once it's off, release both trip reset buttons. Turn off the ignition switch and then turn it back on to complete the maintenance reset.
17
1
Share

How to Fix Abnormal Power Window Operation in Honda Vezel?

Open the door where the switch needs to be replaced. For most models, the power window switch area is made of plastic. Carefully examine the seam between the trim panel and door panel to locate the notch. Insert a pry tool or flat tool into the notch to lift the trim panel, then slowly remove the panel along the gap. Disconnect the power window switch connector. Flip the trim panel over, and you should see the switch secured by several cross-head screws. Remove these screws to detach the power window switch. Install the new power window switch, tighten the screws, and reconnect the connector. Test the window operation first to confirm the switch functions properly before reinstalling the trim panel.
8
2
Share

How to remove the fuel pump of Honda CRV?

Remove the rear seat of the Honda Fit vehicle, and use a flat-head screwdriver to pry open the cover plate of the Honda CRV fuel pump. Take off the cover plate of the Honda CRV fuel pump and unplug the connector of the Honda CRV fuel pump. Disconnect the fuel inlet pipe of the Honda Fit, then remove the entire fuel pump of the Honda CRV. Be extremely careful to avoid any open flames or sparks during the process. During installation, note that there are two very small oil drain holes on both sides of the fuel pump base, and no oil should drip from them. Since the fuel pump is immersed in gasoline for a long time, the sealing ring is prone to aging. When installing the fuel pump, check whether the sealing rings on the inlet and outlet pipes are aged or worn.
2
1
Share

How to Replace the Wiper Switch Assembly on a Buick Excelle?

During disassembly, first push the wiper towards the base of the wiper arm. Once it is completely detached from the wiper arm interface, pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade slightly; otherwise, it may encounter resistance during removal. Installation follows the reverse order of disassembly. First, insert the wiper interface into the wiper arm. During this step, the wiper arm clip must pass through the wiper frame. Then, pull the U-shaped connector upwards into the U-shaped clip. If you hear a crisp "click" sound, it indicates that the installation is properly seated. After installing the new motor, it is advisable to first plug in the power connector to test whether it operates normally.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.