What are the differences between sedans and SUVs?

1 Answers
DeHope
07/29/25 6:41pm
1. Different Ground Clearance: Vehicles traveling on highways generally move at higher speeds, making visibility a crucial factor. Due to their higher ground clearance and open design, SUVs offer a better field of vision compared to sedans. This allows SUV drivers to assess road conditions ahead more effectively, potentially making them slightly safer in this regard. 2. Different Handling: In terms of handling, sedans tend to outperform SUVs. For long-distance or extended driving periods, sedans are noticeably more comfortable. They require less steering effort at high speeds and handle turns more easily. SUVs, with their larger body size and higher center of gravity, generally can't match the handling performance of sedans. 3. Different Fuel Consumption: Fuel consumption primarily depends on engine power. With the same engine displacement, SUVs tend to consume more fuel than sedans. This is mainly because, at high speeds, a significant portion of an SUV's fuel is used to overcome air resistance. Generally, vehicles with more aerodynamic designs consume less fuel. Due to their inherent body design, SUVs typically have higher fuel consumption.
Was this review help?
3
5
Share
More Forum Discussions

Where are the brake and accelerator pedals located in an automatic transmission car?

In an automatic transmission car, both the brake and accelerator pedals are located under the feet. The rightmost pedal is the accelerator, and to its left is the brake, both controlled by the right foot. When operating these pedals, the body requires support to maintain balance. While the right foot presses the pedals, the left foot can stabilize the body on the floor. If both feet were placed on the brake and accelerator separately, they would be in a semi-suspended state without a stable point of force, making it easy to lose control when pressing either pedal. In emergency situations, having both feet on the pedals might lead to misjudgment, such as pressing the accelerator instead of the brake. Assigning control of both pedals to one foot reduces this risk and also decreases the vehicle's side-slip coefficient when braking while the accelerator is pressed. If the brake pedal in an automatic car were placed where the clutch is in a manual transmission, with the right foot on the accelerator and the left on the brake, the safety factor might potentially improve.
12
1
Share

What is the normal idle speed for a sedan?

The normal idle speed for a sedan is generally between 700-900 RPM. Idle speed refers to the operation of the engine under no load, where it only needs to overcome the internal friction resistance of its components without delivering any external power. The minimum stable engine speed under these conditions is referred to as the idle speed. The idle speed can be adjusted by modifying the throttle opening size, and the optimal idle speed is the lowest RPM at which the engine does not vibrate. Effects of low idle speed: 1. If the idle speed is too low, the engine may stall when decelerating or stopping. 2. Low idle speed affects gear shifting. Many cars still use manual transmissions, and if the idle speed is too low, gear engagement during shifting becomes more difficult, leading to less smooth operation and increased risk of gear collision and component wear. 3. During acceleration, low idle speed may result in insufficient power, preventing the car from performing optimally.
13
2
Share

How Long Does Car Film Last?

Car films are divided into two main categories: glass films, also known as window films, and paint films, including the commonly referred to invisible car wraps (paint protection films) and car color change films. The time required for these two types of car films differs. The former is quicker, taking about 3 to 5 hours, while the latter takes much longer, ranging from 1 to 2 days to as long as 3 to 5 days. Additional information about car films is as follows: 1. Introduction: Car film refers to a thin layer applied to the front and rear windshields, side windows, and sunroof of a vehicle. This layer is also known as solar film or heat insulation film. 2. Functions: Its primary functions include blocking ultraviolet rays, reducing heat, preventing injuries caused by shattered glass, and reducing glare. Additionally, due to the one-way transparency of solar films, it helps protect personal privacy. It also minimizes damage to interior items and passengers from UV exposure, lowers the car's interior temperature through physical reflection, reduces the use of air conditioning, and consequently decreases fuel consumption, saving on expenses.
18
1
Share

What Causes Vehicle Body Vibration at High Speeds?

Here are the reasons for vehicle body vibration at high speeds: 1. Incorrect front wheel alignment angles, excessive toe-in. 2. Low front tire pressure or tire imbalance due to repairs. 3. Deformed front wheel spokes or unequal number of tire bolts. 4. Loose installation of transmission system components. 5. Bent drive shaft, power imbalance, or deformed front axle. 6. Shock absorber failure. Below are precautions for high-speed driving: 1. Pay attention to speed limit signs and drive within the specified speed range. Do not exceed the maximum speed limit and drive in lanes appropriate for your speed. 2. Avoid sudden braking on highways to prevent rear-end collisions caused by following vehicles failing to brake in time, or even more severe multi-vehicle collisions. 3. Stay focused while driving, pay attention to guardrails, and avoid scraping or colliding with them due to insufficient safety distance or momentary distraction. 4. Try to keep a distance from large trucks and buses. These heavy-duty vehicles have poorer braking performance, and when overloaded, their control systems and braking performance further decline, posing significant risks to nearby passenger cars.
2
1
Share

Why is the steering wheel heavier in winter?

Here is the relevant introduction to the reasons for a heavier steering wheel in winter: 1. It is normal for the car steering wheel to feel heavier in winter because the lubrication between various components of the vehicle decreases in low-temperature environments, especially between the chassis suspension and the transmission system. Therefore, drivers may find it more strenuous to turn the steering wheel or shift gears compared to summer, and the vehicle may feel heavier during driving. However, it will return to normal after driving for a while. 2. In low winter temperatures, the movement of air molecules slows down, leading to a decrease in tire pressure, which increases the friction between the tires and the road, making it more difficult to turn the steering wheel. 3. In low-temperature environments, the fluidity of hydraulic power steering fluid weakens, resulting in insufficient power steering fluid. Since the power steering fluid is the main force that propels the vehicle forward, the car naturally becomes harder to drive when the power steering fluid is insufficient.
4
4
Share

How to Determine if a Car is Burning Oil?

Here are the effects of a car burning oil: 1. Mild burning: Increased fuel consumption, insufficient power, prone to carbon deposits, which can make the car hard to start and cause engine shaking. 2. Severe burning: Significant oil consumption, severe engine wear. If the oil burns out completely, the engine will require major repairs. 3. Identification and inspection: Observe the concentration of blue smoke. Frequently check the oil dipstick to monitor the rate of oil consumption. Here are the solutions for a car burning oil: 1. For older vehicles experiencing oil burning, consider using a higher viscosity oil to improve the sealing between the engine pistons and cylinder walls. The ultimate solution to completely resolve oil burning is to conduct a thorough inspection and repair of the vehicle to address the root cause. 2. If signs of oil burning are detected, regularly check the oil dipstick, replace the oil and oil filter as specified in the product manual, and use genuine oil filter parts. If abnormal oil consumption is observed, take the car to a repair shop for inspection.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.